No, I did not set debug mode. I just did now, but it doesn't seem to be giving any additional information. And I'm running as root so there shouldn't be any problem accessing /dev/adX.
I've progressed past these errors though. Not sure yet if they mean anything. I successfully completed the first script on ad0/ad1 and ran the second script on ad0/ad1. Other than these errors I mentioned everything seemed to work okay.
How do I undo the mirroring? I'm getting errors when trying to add the third disk to the mix and I'd like to start from scratch, without having to rebuild my VM.
These are the errors I'm seeing:
79+0 records in
79+0 records out
40448 bytes transferred in 0.053001 secs (763156 bytes/sec)
fdisk: invalid fdisk partition table found
fdisk: conflict with open slices
******* Working on device /dev/ad1 *******
parameters extracted from in-core disklabel are:
cylinders=33288 heads=15 sectors/track=63 (945 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=33288 heads=15 sectors/track=63 (945 blks/cyl)
Information from DOS bootblock is:
1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 20971377 (10239 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 687/ head 14/ sector 63
2: <UNUSED>
3: <UNUSED>
4: <UNUSED>
gmirror: Provider /dev/ad1s1 already inserted.
|