I'm running 4.4 stable and trying to setup my printer (HP DeskJet 870C).
I installed LPRng and then for more filtering, installed apsfilter.
Apsfilter printed a nice test page, but now if I try to print with either lpr or in mutt (using lpr), I get absolutely nothing.
Checking with lpc or lpq, I see "Can't open /dev/lpt0 Permission denied" and under lpq part of the line reads "Errors...too many errors".
Code:
ls -l /dev/lpt* has:
crw------- 1 root wheel 16, 0 Apr 11 22:39 /dev/lpt0
crw------- 1 root wheel 16, 1 Mar 7 20:43 /dev/lpt1
crw------- 1 root wheel 16, 2 Mar 7 20:43 /dev/lpt2
Here is the only uncommented portion of /etc/printcap (which I also copied to /etc/LPRng):
Code:
# APS1_BEGIN:printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
lp|pcl3/unspec;r=300x300;q=medium;c=gray;p=letter;m=auto:\
:lp=/dev/lpt0:\
:if=/etc/apsfilter/basedir/bin/apsfilter:\
:sd=/var/spool/lpd/lp:\
:lf=/var/spool/lpd/lp/log:\
:af=/var/spool/lpd/lp/acct:\
:mx#0:\
:sh:
# APS1_END - don't delete this
Apsfilter and FreeBSD worked fine with this printer.
Any ideas what is wrong or what I'm missing?
Thanks