@ocicat, Thanks for taking a look at my dmesg but I think BSDfan666 is probably correct.
Code:
OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17 20:55:07 MDT 2010
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2050 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
real mem = 2137026560 (2038MB)
avail mem = 2061840384 (1966MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/09/07, BIOS32 rev. 0 @ 0xfd63d, SMBIOS rev. 2.4 @ 0xdf010 (38 entries)
bios0: vendor Phoenix Technologies LTD version "5.60" date 03/09/2007
bios0: TOSHIBA Satellite A105
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC HPET MCFG TCPA APIC SLIC BOOT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices HDEF(S4) PXS1(S4) PXS2(S4) USB2(S3) USB3(S3) USB7(S3) LANC(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2050 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiprt5 at acpi0: bus 7 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: FN00
acpitz0 at acpi0: critical temperature 106 degC
acpitz1 at acpi0: critical temperature 96 degC
acpibtn0 at acpi0: LID_
acpibat0 at acpi0: BAT0 model "PA3399U-2BAS/BRS" serial 042E type Li-ion
acpiac0 at acpi0: AC unit online
acpibtn1 at acpi0: PWRB
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRT_
acpivout1 at acpivideo0: LCD_
acpivout2 at acpivideo0: TV__
acpivout3 at acpivideo0: DVI_
acpivideo1 at acpi0: GFX0
acpivout4 at acpivideo1: CRT1
acpivout5 at acpivideo1: DTV1
acpivout6 at acpivideo1: LCD_
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1800 0xdf000/0x1000! 0xe0000/0x1c00!
cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1 int 22 (irq 10)
azalia0: codecs: Realtek ALC861, AT&T/Lucent/0x3026, using Realtek ALC861
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17 (irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16 (irq 10)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18 (irq 11)
pci3 at ppb2 bus 5
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 int 18 (irq 11), MoW1, address 00:18:de:d1:c3:18
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 7
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18 (irq 255), CardBus support disabled
"TI PCIXX12 FireWire" rev 0x00 at pci4 dev 6 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not configured
sdhc0 at pci4 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: apic 1 int 18 (irq 11)
sdmmc0 at sdhc0
fxp0 at pci4 dev 8 function 0 "Intel PRO/100 VM" rev 0x02, i82562: apic 1 int 20 (irq 10), address 00:a0:d1:63:7e:f0
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1032GSX>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.60> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft Microsoft Wireless Optical Mouse\M-. 1.00" rev 2.00/0.07 addr 2
uhidev0: iclass 3/1, 23 report ids
ums0 at uhidev0 reportid 17: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0
uhid2 at uhidev0 reportid 20: input=1, output=0, feature=0
uhid3 at uhidev0 reportid 21: input=3, output=0, feature=0
uhid4 at uhidev0 reportid 23: input=0, output=0, feature=1
uhidev1 at uhub3 port 2 configuration 1 interface 0 "Hewlett-Packard Company HP USB Smart Card Keyboard" rev 2.00/5.35 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b