View Single Post
  #5   (View Single Post)  
Old 14th April 2010
MAR MAR is offline
New User
 
Join Date: Apr 2010
Posts: 6
Smile PIC Installation on OpenBSD v4.6/Tyan S2895

Change #2. "Test #3" The system BIOS kicked the SCSI controller out of the boot sequence, so it was a simple matter to restore it. Only 1 dual core cpu is configured, 8GB ECC ram is installed, Broadcom 5823 VAC+ not being assigned mapping on the PCI bus (Bad News) but making progress. I can take a look at the BSD.MP, any suggestions would be appreciated as I only run SMP and Quad motherboards (Tyan S4881). Will send this dmesg out to OpenBSD folks, but believe I will get more help on these forums (from past experience with OpenBSD folks) Keep in mind I bought the 3 CD set to support these guys. dmesg follows.........

OpenBSD 4.6 (GENERIC) #53: Thu Jul 9 21:19:22 MDT 2009
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2682257408 (2558MB)
avail mem = 2585890816 (2466MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.33 @ 0x7ffef000 (34 entries)
bios0: vendor Phoenix Technologies Ltd. version "2004Q3" date 11/18/2008
bios0: TYAN Computer Corp. S2895
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SRAT SPCR MCFG APIC BOOT SSDT
acpi0: wakeup devices PCI0(S5) COM1(S4) COM2(S4) PS2K(S4) PS2M(S4) USB0(S3) USB2(S3) MAC0(S5) P2P0(S5) G0PA(S5) G0PB(S5) MAC0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 290, 2813.36 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 5 pa 0xd0000000, version 11, 4 pins
ioapic2 at mainbus0 apid 6 pa 0xd0001000, version 11, 4 pins
ioapic3 at mainbus0 apid 7 pa 0xd0600000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P2P0)
acpiprt2 at acpi0: bus 2 (XVR0)
acpiprt3 at acpi0: bus 255 (XVR1)
acpiprt4 at acpi0: bus 255 (XVR2)
acpiprt5 at acpi0: bus 255 (XVR3)
acpiprt6 at acpi0: bus 17 (G0PA)
acpiprt7 at acpi0: bus 18 (G0PB)
acpiprt8 at acpi0: bus 128 (PCI1)
acpiprt9 at acpi0: bus 129 (XVR0)
acpiprt10 at acpi0: bus 255 (XVR1)
acpiprt11 at acpi0: bus 255 (XVR2)
acpiprt12 at acpi0: bus 255 (XVR3)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0: Cool'n'Quiet K8 2813 MHz: speeds: 2800 2600 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM registered ECC PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM registered ECC PC3200CL3.0
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM registered ECC PC3200CL3.0
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM registered ECC PC3200CL3.0
spdmem4 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC3200CL3.0
spdmem5 at iic0 addr 0x55: 1GB DDR SDRAM registered ECC PC3200CL3.0
spdmem6 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC3200CL3.0
spdmem7 at iic0 addr 0x57: 1GB DDR SDRAM registered ECC PC3200CL3.0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 4 int 20 (irq 10), version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 4 int 20 (irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: apic 4 int 20 (irq 11), nForce4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GH22NP20, 2.00> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 4 int 20 (irq 11) for native-PCI interrupt
atapiscsi1 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GH22LS40, LL02> ATAPI 5/cdrom removable
cd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using apic 4 int 20 (irq 10) for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 4 int 20 (irq 10), address 00:e0:81:57:ba:06
eephy0 at nfe0 phy 1: 88E1111 Gigabit PHY, rev. 1
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 vendor "NVIDIA", unknown product 0x0092 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pci3 at pchb0 bus 16
ppb2 at pci3 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci4 at ppb2 bus 17
ppb3 at pci4 dev 4 function 0 "IBM 133 PCIX-PCIX" rev 0x03
pci5 at ppb3 bus 18
ami0 at pci5 dev 0 function 0 "Symbios Logic MegaRAID 320" rev 0x02: apic 5 int 0 (irq 11)
ami0: LSI 532, 32b, FW 414J, BIOS vA100, 512MB RAM
ami0: 2 channels, 0 FC loops, 1 logical drives
scsibus2 at ami0: 40 targets
sd0 at scsibus2 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 34728MB, 512 bytes/sec, 71122944 sec total
scsibus3 at ami0: 16 targets
scsibus4 at ami0: 16 targets
aapic0 at pci3 dev 10 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
ppb4 at pci3 dev 11 function 0 "AMD 8131 PCIX" rev 0x12
pci6 at ppb4 bus 19
ubsec0 at pci6 dev 4 function 0 "Broadcom 5823" rev 0x01pci_intr_map: bus 19 dev 4 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
failed to allocate interrupt slot for PIC pic0 pin 11
: couldn't establish interrupt at irq 11
aapic1 at pci3 dev 11 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
pchb3 at pci0 dev 25 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pci7 at pchb3 bus 128
"NVIDIA nForce4 DDR" rev 0xa3 at pci7 dev 0 function 0 not configured
"NVIDIA CK804" rev 0xa3 at pci7 dev 1 function 0 not configured
nfe1 at pci7 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 7 int 20 (irq 5), address 00:e0:81:57:ba:07
eephy1 at nfe1 phy 1: 88E1111 Gigabit PHY, rev. 1
ppb5 at pci7 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci8 at ppb5 bus 129
pchb4 at pci0 dev 25 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb5 at pci0 dev 25 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate1 at pci0 dev 25 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

Reply With Quote