View Single Post
  #3   (View Single Post)  
Old 22nd November 2008
GullibleJones GullibleJones is offline
Port Guard
 
Join Date: Sep 2008
Posts: 13
Default

Lowering the volume levels doesn't work, the output level from my speakers remains constant.

This is my dmesg output:

Code:
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
real mem  = 526540800 (502MB)
avail mem = 500682752 (477MB)
User Kernel Config
UKC> disable acpi
429 acpi0 disabled
UKC> enable apm
330 apm0 already enabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/04/07, BIOS32 rev. 0 @ 0xfd460, SMBIOS rev. 2.4 @ 0xdf810 (34 entries)
bios0: vendor Acer version "v1.3508" date 06/04/07
bios0: Acer, inc. Aspire 3680
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd460/0xba0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #11 is the last bus
bios0: ROM list: 0xc0000/0xea00! 0xdf800/0x800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xc0000000, size 0x10000000
drm at vga1 unsupported
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 10
azalia0: codec[s]: Realtek ALC883, AT&T/Lucent/0x3026, using Realtek ALC883
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: irq 11
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8038" rev 0x14, Yukon-2 FE (0x1): irq 11
msk0 at mskc0 port A: address 00:1b:24:06:bd:5f
eephy0 at msk0 phy 0: Marvell 88E3082 10/100 PHY, rev. 3
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: irq 11
pci2 at ppb1 bus 3
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 11
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:19:7e:1e:5e:35
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: irq 10
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: irq 10
pci4 at ppb3 bus 5
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 10
cbb0 at pci5 dev 9 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 10
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 9 function 2 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 11 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541680J9SA00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <Slimtype, DVD C DS24CZP, PA11> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB Trackball" rev 1.10/14.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
and mixerctl:

Code:
outputs.master=120,120
outputs.master.mute=off
inputs.mic.mute=off
inputs.mic=120,120
inputs.mic2.mute=off
inputs.mic2=120,120
inputs.line.mute=off
inputs.line=120,120
inputs.cd.mute=off
inputs.cd=120,120
inputs.speaker.mute=off
inputs.speaker=120
outputs.master.boost=off
outputs.headphones.mute=off
outputs.headphones.boost=off
inputs.front.dac.mute=off
inputs.front.mixer.mute=off
outputs.surround=120,120
outputs.surround.mute=off
outputs.surround.boost=off
inputs.surround.dac.mut=off
inputs.surround.mixer.m=off
outputs.clfe=120,120
outputs.clfe.mute=off
outputs.clfe.boost=off
inputs.clfe.dac.mute=off
inputs.clfe.mixer.mute=off
outputs.side=120,120
outputs.side.mute=off
outputs.side.boost=off
inputs.side.dac.mute=off
inputs.side.mixer.mute=off
record.volume.mute=off
record.volume=120,120
record.source=
record.source2.mute=off
record.volume2=120,120
record.source2=line
inputs.usingdac=analog
record.usingadc=analog
If binary updates are available, I may decide to track Current.
Reply With Quote