View Single Post
Old 31st December 2017
shep shep is offline
Real Name: Scott
Arp Constable
Join Date: May 2008
Location: Dry and Dusty
Posts: 1,345

The ASrock J3355m is low-power, fanless m-atx board that has a few quirks. It has fairly aggressive power-savings features that are not fully supported in OpenBSD. With the default Bios settings it would not wake once the display went into power-save. This may have something to do with the failure to load firmware:
I found the firmware on Intel's site and placed it in both /etc/firmware/i915 and /etc/firmware, but it still would not load. Disabling the C states and S3 (suspend to ram) in the bios stopped the power-saving lockups.

The bios is updated to 1.40 and it efi boots reliably Lastly, the rtwn(4) mini pci-e card performs as well as my older ath5k/ralink_2561 pci cards.

OpenBSD 6.2-current (GENERIC.MP) #312: Fri Dec 29 15:25:50 MST 2017
real mem = 8213770240 (7833MB)
avail mem = 7957901312 (7589MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x6dc55000 (18 entries)
bios0: vendor American Megatrends Inc. version "P1.40" date 07/14/2017
bios0: ASRock J3355M
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: wakeup devices SIO1(S4) PS2K(S4) PS2M(S4) UAR1(S4) UAR2(S4) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz, 1996.11 MHz
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz, 1995.42 MHz
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP03)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP05)
acpiprt4 at acpi0: bus 4 (RP06)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2001, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x5af0 rev 0x0b
inteldrm0 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x5a85 rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/bxt_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)
inteldrm0: 1440x900, 32bpp
Unclaimed register detected after writing to register 0x68970
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 14 function 0 vendor "Intel", unknown product 0x5a98 rev 0x0b: msi
azalia0: codecs: Realtek/0x0887, 0x0000/0x0000, using Realtek/0x0887
audio0 at azalia0
vendor "Intel", unknown product 0x5a9a (class communications subclass miscellaneous, rev 0x0b) at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 vendor "Intel", unknown product 0x5ae3 rev 0x0b: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5003AZEX-0, 01.0> SCSI3 0/direct fixed naa.50014ee2b9dad434
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <ASUS, DRW-2014S1T, 1.01> ATAPI 5/cdrom removable
ppb0 at pci0 dev 19 function 0 vendor "Intel", unknown product 0x5ad8 rev 0xfb: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL (0x2c80), msi, address 70:85:c2:46:af:e3
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb1 at pci0 dev 19 function 1 vendor "Intel", unknown product 0x5ad9 rev 0xfb: msi
pci2 at ppb1 bus 2
rtwn0 at pci2 dev 0 function 0 "Realtek 8188CE" rev 0x01: msi
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address 24:0a:64:0e:76:f3
ppb2 at pci0 dev 19 function 2 vendor "Intel", unknown product 0x5ada rev 0xfb: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 19 function 3 vendor "Intel", unknown product 0x5adb rev 0xfb: msi
pci4 at ppb3 bus 4
xhci0 at pci0 dev 21 function 0 vendor "Intel", unknown product 0x5aa8 rev 0x0b: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x5ae8 rev 0x0b
vendor "Intel", unknown product 0x5ad4 (class serial bus subclass SMBus, rev 0x0b) at pci0 dev 31 function 1 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
efifb at mainbus0 not configured
uhub1 at uhub0 port 8 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/88.32 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (d45e88d0cbd03d4e.a) swap on sd0b dump on sd0b
name of display: :0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float, 
    GLX_ARB_framebuffer_sRGB, GLX_ARB_multisample, 
    GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile, 
    GLX_EXT_fbconfig_packed_float, GLX_EXT_framebuffer_sRGB, 
    GLX_EXT_import_context, GLX_EXT_libglvnd, GLX_EXT_texture_from_pixmap, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_INTEL_swap_event, 
    GLX_MESA_copy_sub_buffer, GLX_OML_swap_method, GLX_SGIS_multisample, 
    GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control
Update: The recent commits to mesa and the kernel drm have made xorg unstable. I went back to 6.2 Release which works with the following:
1) Disable C power saving states and S3 "hibernate to ram" in the Bios
2) Use the sna acceleration instead of glamor with
Section "Device"
        Identifier "HD 500"
        Driver "intel"
        Option "AccelMethod" "sna"

Last edited by shep; 6th January 2018 at 08:32 PM. Reason: 6.2 Release
Reply With Quote