View Single Post
Old 15th August 2011
sepuku's Avatar
sepuku sepuku is offline
Real Name: Vizard Sepuku
Package Pilot
 
Join Date: Jun 2011
Location: Athens & Chania,Greece
Posts: 143
Default

Quote:
Originally Posted by jggimi View Post
I would install sysutils/smartmontools, and look to # smartctl -s on /dev/sd0c; smartctl -a /dev/sd0c to enable SMART and then query the electronics on the drive for insights. However, you are running 4.9-release and I do not believe that is new enough for smartmontools to work with USB devices.
I have that tool on Ubuntu,ran it yesterday and can't say i understood much.I know that it might not be proper to post the result here since i ran it on a ubuntu machine,but with your experience you might understand more than me.

I gave:sudo smartctl -a /dev/sdb and part of what i took was this:

Code:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   128   100   006    Pre-fail  Always       -       1877912968
  3 Spin_Up_Time            0x0003   093   093   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1644
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   065   060   030    Pre-fail  Always       -       3630356
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       504
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       113
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   083   000    Old_age   Always       -       472453611630
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   038   045    Old_age   Always   In_the_past 39 (0 30 39 33)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       46
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1844
194 Temperature_Celsius     0x0022   039   062   000    Old_age   Always       -       39 (0 17 0 0)
195 Hardware_ECC_Recovered  0x001a   128   100   000    Old_age   Always       -       1877912968
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       214026810294949
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       2097349024
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       565242842

SMART Error Log Version: 1
No Errors Logged
I think that "Raw_Read_Error_Rate" should have raw_value zero from what i 've heard.So this might be a problem.

And unfortunately i won't have access to desktop with OpenBSD before the 21st of the month.So i think i should take a "time-out" until then.
Reply With Quote