View Single Post
Old 26th June 2008
EvilMonkeySlayer EvilMonkeySlayer is offline
New User
Join Date: Jun 2008
Posts: 3

FTP Server running OpenBSD 4.3.

Compaq Proliant ML370.
1GHz Pentium 3
1GB RAM (2x 512MB PC133 SDRAM)
2x 36.4GB 10k RPM SCSI hard drives

Originally Posted by dmesg
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
real mem = 1073295360 (1023MB)
avail mem = 1029787648 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xf206c (27 entries)
bios0: vendor Compaq version "P17" date 12/18/2002
bios0: Compaq ProLiant ML370
acpi0 at bios0: rev 0, can't enable ACPI
bios0: ROM list: 0xc0000/0x8000 0xe8000/0x6000 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
siop0 at pci0 dev 1 function 0 "Symbios Logic 53c1510D" rev 0x02: irq 10, using 4K of on-board RAM
scsibus0 at siop0: 16 targets
siop1 at pci0 dev 1 function 1 "Symbios Logic 53c1510D" rev 0x02: irq 11, using 4K of on-board RAM
scsibus1 at siop1: 16 targets
sd0 at scsibus1 targ 0 lun 0: <COMPAQ, BD03688272, HPB4> SCSI3 0/direct fixed
sd0: 34732MB, 43962 cyl, 2 head, 809 sec, 512 bytes/sec, 71132000 sec total
sd1 at scsibus1 targ 1 lun 0: <COMPAQ, BD036863AC, HPB4> SCSI3 0/direct fixed
sd1: 34732MB, 49070 cyl, 2 head, 724 sec, 512 bytes/sec, 71132000 sec total
fxp0 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: irq 15, address 00:02:a5:51:be:a8
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x51: SMBus disabled
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <COMPAQ, CRD-8402B, 1.03> SCSI0 5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2
pciide0: no compatibility interrupt for use by channel 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 7fe5 netmask ffe5 ttymask ffe7
mtrr: Pentium Pro MTRR support
softraid0 at root
siop1: target 0 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
siop1: target 1 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
root on sd0a swap on sd0b dump on sd0b
Reply With Quote