[undercoverdaememon]

Sorry, the other was incomplete, this one it's the good one,

OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul  9 21:32:39 MDT 2009
    deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem  = 267747328 (255MB)
avail mem = 250056704 (238MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/21/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xfa4c0 (82 entries)
bios0: vendor Dell Computer Corporation version "A05" date 09/21/2005
bios0: Dell Computer Corporation PowerEdge 1800
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR HPET MCFG
acpi0: wakeup devices PCI0(S5) PALO(S5) PBLO(S5) PCLO(S5) PICH(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0: apid 10 pa 0xfec80800, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apid 10
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PALO)
acpiprt2 at acpi0: bus 3 (PXHB)
acpiprt3 at acpi0: bus 2 (PXHA)
acpiprt4 at acpi0: bus 4 (PBLO)
acpiprt5 at acpi0: bus 5 (PCLO)
acpiprt6 at acpi0: bus 6 (PICH)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x800 0xcc800/0x1000 0xcd800/0x5400 0xec000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 4 function 0 "Symbios Logic 53c1030" rev 0x08: apic 9 int 10 (irq 5)
scsibus0 at mpi0: 16 targets, initiator 7
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
em0 at pci3 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 10 int 5 (irq 11), address 00:14:22:b3:fd:c6
ppb3 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x09: apic 8 int 16 (irq 0)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x09: apic 8 int 16 (irq 0)
pci5 at ppb4 bus 5
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 8 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 8 int 19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 8 int 18 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 8 int 23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci6 at ppb5 bus 6
ahc0 at pci6 dev 3 function 0 "Adaptec AHA-29160 U160" rev 0x02: apic 8 int 20 (irq 10)
scsibus1 at ahc0: 16 targets, initiator 7
probe(ahc0:5:0): Check Condition (error 0x70) on opcode 0x0
    SENSE KEY: Soft Error
     ASC/ASCQ: Logical Unit Failure Prediction Threshold Exceeded
sd0 at scsibus1 targ 5 lun 0: <QUANTUM, ATLAS10K3_18_WLS, 020W> SCSI3 0/direct fixed
sd0: 17537MB, 512 bytes/sec, 35916548 sec total
vga1 at pci6 dev 5 function 0 "ATI Radeon VE" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 8 int 17 (irq 11)
drm0 at radeondrm0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <LITE-ON, CD-ROM LTN-4891S, NDS3> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
ahc0: target 5 using 16bit transfers
ahc0: target 5 synchronous at 80.0MHz DT, offset = 0x7f
root on sd0a swap on sd0b dump on sd0b