DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD General

FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 11th September 2008
skynet_tech skynet_tech is offline
New User
 
Join Date: Sep 2008
Posts: 3
Thanked 0 Times in 0 Posts
Default strange load problem on freebsd 7.0 amd64

System has dual Xeon quadracore, totally 8 CPU and 16 GB ram.
Problem: load average periodically is somewhere 20-30, and server is freezing. But in same time, only 1cpu is used. Running processes is many small fastcgi/php-cgi, so there is not one resource hungry process.


from top:
Code:
last pid: 99483;  load averages: 23.82, 17.13, 14.08    up 6+19:09:32  16:22:11
913 processes: 2 running, 910 sleeping, 1 zombie
CPU states:  9.8% user,  0.0% nice,  8.0% system,  0.4% interrupt, 81.8% idle
Mem: 3006M Active, 10G Inact, 689M Wired, 476M Cache, 214M Buf, 859M Free
Swap: 4096M Total, 12K Used, 4096M Free
suggestions?
Reply With Quote
  #2   (View Single Post)  
Old 11th September 2008
graudeejs's Avatar
graudeejs graudeejs is offline
Real Name: Aldis Berjoza
formerly killasmurf86
 
Join Date: Jul 2008
Location: Riga, Latvia
Posts: 588
Thanked 29 Times in 26 Posts
Default

did you compile your kernel with SMP?
show your kernel config
show output of
Code:
uname -a
Reply With Quote
  #3   (View Single Post)  
Old 11th September 2008
skynet_tech skynet_tech is offline
New User
 
Join Date: Sep 2008
Posts: 3
Thanked 0 Times in 0 Posts
Default

Code:
cpu		HAMMER
ident	 	SUN	

makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_ULE		# ULE scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol 
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat [KEEP THIS!]
options 	COMPAT_IA32		# Compatible with i386 binaries
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	ADAPTIVE_GIANT		# Giant mutex is adaptive.
options 	STOP_NMI		# Stop CPUS using NMI instead of IPI
options 	AUDIT			# Security event auditing

# Make an SMP-capable kernel by default
options 	SMP			# Symmetric MultiProcessor Kernel

options		QUOTA

# CPU frequency control
device		cpufreq

# Bus support.
device		acpi
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
device		ahc		# AHA2940 and onboard AIC7xxx devices
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
device		ahd		# AHA39320/29320 and onboard AIC79xx devices
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		hptiop		# Highpoint RocketRaid 3xxx series
device		isp		# Qlogic family
#device 	ispfw		# Firmware for QLogic HBAs- normally a module
device		mpt		# LSI-Logic MPT-Fusion
#device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
device		trm		# Tekram DC395U/UW/F DC315U adapters

device		adv		# Advansys SCSI adapters
device		adw		# Advansys wide SCSI adapters
device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device		bt		# Buslogic/Mylex MultiMaster SCSI adapters


# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc


# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports
device		uart		# Generic UART driver

# PCI Ethernet NICs.
device		em		# Intel PRO/1000 Gigabit Ethernet Family

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

I got load average around 0.5, and top show something like this
Code:
1021 processes: 1 running, 1020 sleeping
then once in 2-5 minutes, there for 2-3 seconds are:
Code:
1029 processes:67 running, 921 sleeping, 1 zombie, 40 lock
after this load average is 20-30 and dropping in 2-3min to 0.5

similar problem here: http://unix.derkeiler.com/Mailing-Li.../msg00551.html
and sadly, looks like there is no patch for FreeBSD 7
Reply With Quote
  #4   (View Single Post)  
Old 11th September 2008
skynet_tech skynet_tech is offline
New User
 
Join Date: Sep 2008
Posts: 3
Thanked 0 Times in 0 Posts
Default

and uname:
Code:
FreeBSD xxxxxx  7.0-RELEASE-p4 FreeBSD 7.0-RELEASE-p4 #4: Tue Sep 3 22:08:16 EEST 2008     xxxxxx:/usr/obj/usr/src/sys/SUN  amd64
Reply With Quote
Reply

Tags
high load, load average

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Strange lib problem mururoa FreeBSD General 3 1st August 2009 07:34 AM
FreeBSD 7.2@amd64 atheros problem ath0: stuck beacon; resetting (bmiss count 4) asmo FreeBSD General 0 6th June 2009 11:02 AM
Strange network problem mururoa FreeBSD General 15 5th November 2008 08:25 AM
Strange Eterm-problem PatrickBaer FreeBSD General 5 22nd July 2008 07:54 AM
NFS and FreeBSD 6.2r strange problem .. bsduser FreeBSD Installation and Upgrading 3 11th July 2008 11:48 AM


All times are GMT. The time now is 09:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick