DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 14th June 2009
lonerman lonerman is offline
New User
 
Join Date: Jun 2009
Posts: 1
Thanked 0 Times in 0 Posts
Question Vetting a bug report

Hello everyone,

I'd like to send in a proper bug report, but I'm not sure I've got everything in order. (Output appended below.) Ran -current snaps on my old dead laptop without problems, but now there's a few quirks with a newer replacement. ...xdm blacks out, starting X from console sometimes comes up with the wrong resolution and unchangeable through xrandr or locks up (not pasting X.log.0 here), and I can't boot up unless acpi is disabled.

I had enough time to install -current, play with it a bit, and sent in an initial dmesg June 1st--although the acpi issue wasn't present. These issues have surfaced on snaps since last Wednesday. I ran trace, ps, show panic, registers, and of course dmesg, like the report page suggests, but I may likely have messed something up since I retyped it on a different machine. Perhaps all the X issues should be addressed in a separately and/or privately to oga@ and matthieu@ (I think those are the right devs)? Try source instead of snaps? Include pcidump and acpidump? Is any of this enough of an issue to even warrant a report in the first place? Any advice I can get is appreciated, I've never submitted a bug report before, so I want to make sure it's right the first time.

Code:
ddb{0}> trace
Debugger() at Debugger+0x5
panic() at panic+0x122
_aml_die() at _aml_die+0xdb
aml_xparse() at aml_xparse+0x1109
aml_xeval() at aml_xeval+0x128
aml_xparse() at aml_xparse+0x5a0
aml_xeval() at aml_xeval+0x128
aml_evalnode() at aml_evalnode+0x68
acpicpu_set_pdc() at acpicpu_set_pdc+0x89
acpicpc_attach() at config_attach+0x98
config_attach() at config_attach+0x11b
acpi_add_device() at acpi_add_device+0x95
aml_walknodes() at aml_walknodes+0x6e
aml_walknodes() at aml_walknodes+0x41
aml_walknodes() at aml_walknodes+0x41
acpi_attach() at acpi_attach+0x49f
config_attach() at config_attach+0x11b
bios_attach() at bios_attach+0xb7
config_attach() at config_attach+0x11b
mainbus_attach() at mainbus_attach+0x52
config_attach() at config_attach+0x11b
cpu_configure() at cpu_configure+0x1c
Debugger() at Debugger+0x5
panic() at panic+0x122
_aml_die() at _aml_die+0xdb
aml_xparse() at aml_xparse+0x1109
aml_xeval() at aml_xeval+0x128
aml_xparse() at aml_xparse+0x5a0
aml_xeval() at aml_xeval+0x128
aml_evalnode() at aml_evalnode+0x68
acpicpu_set_pdc() at acpicpu_set_pdc+0x89
acpicpc_attach() at config_attach+0x98
config_attach() at config_attach+0x11b
acpi_add_device() at acpi_add_device+0x95
aml_walknodes() at aml_walknodes+0x6e
aml_walknodes() at aml_walknodes+0x41
aml_walknodes() at aml_walknodes+0x41
acpi_attach() at acpi_attach+0x49f
config_attach() at config_attach+0x11b
bios_attach() at bios_attach+0xb7
config_attach() at config_attach+0x11b
mainbus_attach() at mainbus_attach+0x52
config_attach() at config_attach+0x11b
cpu_configure() at cpu_configure+0x1c
main() at main+0x3d0
end trace frame: 0x0, count: -23

ddb{0}> ps
  PID  PPID PGRP UID S   FLAGS	WAIT         COMMAND
*  0   -1   0    0   7 0x80200               swapper

ddb{0}> show panic
aml_die aml_xparse:4019

ddb{0}> show registers
ds		0x2e4c			mp_pdirpa+0xd65
es		0x3230			mp_pdirpa+0x1149
fs		0x3270			mp_pdirpa+0x1189
gs		0
rdi		0xe
rsi		0x3d0
rbp		0xffffffff80ce3220	end+0xbc1a0
rbx		0xffffffff807b2e4c	btkbd_trtab+0x172c
rdx		0
rcx		0
rax		0x1
r8		0xffffffff80ce3140	end+0xbc0c0
r9		0
r10		0x1
r11		0x1
r12		0xffffffff80ce3230	end+0xbc1b0
r13		0x100
r14		0xfb3
r15		0xffffffff807b348b	btkbd_trtab+0x1d6b
rip		0xffffffff803e2b25	Debugger+0x5
cs		0x8
rflags		0x202
rsp		0xffffffff80ce3220	end+0xbc1a0
ss		0x10
Debugger+0x5:	leave

ddb{0}> dmesg
OpenBSD 4.5-current (GENERIC.MP) #172: Fri Jun 12 14:56:50 MDT 2009
	deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1036713984 (988MB)
avail mem = 994508800 (948MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfd770 (38 entries)
bios0: vendor LENOVO version "6AET57WW" date 04/01/2009
bios0: LENOVO 2743CTO
acpi at bios0: rev2
acpi0: tables DSDT FACP APIC MCFG SLIC ECDT DBGP BOOT OEMD HPET GSCI ATKG SSDT
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB5(S3) EUSB(S3) USB3(S3) USB
4(S3) POP6(S4) GLAN(S4) P0P8(S3) SLBP(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2095.15 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX1
6,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2095.15 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX1
6,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec0000, version 20, 24 pins
acpihpet0 at acpi:14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (POP1)
acpiprt2 at acpi0: bus 2 (POP3)
acpiprt3 at acpi0: bus 3 (POP4)
acpiprt4 at acpi0: bus 12 (POP6)
acpiprt5 at acpi0: bus 13 (POP8)
acpiec0 at acpi0
acpicpi at acpi0acpi: bad checksum at 0xffff8000000f4008
LOAD: Not a SSDT!
024d Called: \_PR_.P001._OSC
  arg0: 0xffff80000019ba08 cnt:05 stk:00 buffer: 10 {16, a6, 77, 40, 0c, 29, b
e, 47, 9e, bd, d8, 70, 58, 71, 39, 53}
  arg1: 0xffff80000019bb88 cnt:01 stk:00 integer: 1
  arg2: 0xffff80000019bc08 cnt:01 stk:00 integer: 1
  arg3: 0xffff80000019af88 cnt:04 stk:62 buffer: 0c {00, 00, 00, 00, 3b, 03, 0
0, 00, 00, 00, 00, 00}
024d Called: \_PR_.P001._OSC
  arg0: 0xffff80000019ba08 cnt:05 stk:00 buffer: 10 {16, a6, 77, 40, 0c, 29, b
e, 47, 9e, bd, d8, 70, 58, 71, 39, 53}
  arg1: 0xffff80000019bb88 cnt:01 stk:00 integer: 1
  arg2: 0xffff80000019bc08 cnt:01 stk:00 integer: 1
  arg3: 0xffff80000019af88 cnt:04 stk:62 buffer: 0c {00, 00, 00, 00, 3b, 03, 0
0, 00, 00, 00, 00, 00}
024d Called: \_PR_.P001._OSC
  arg0: 0xffff80000019ba08 cnt:05 stk:00 buffer: 10 {16, a6, 77, 40, 0c, 29, b
e, 47, 9e, bd, d8, 70, 58, 71, 39, 53}
  arg1: 0xffff80000019bb88 cnt:01 stk:00 integer: 1
  arg2: 0xffff80000019bc08 cnt:01 stk:00 integer: 1
  arg3: 0xffff80000019af88 cnt:04 stk:62 buffer: 0c {00, 00, 00, 00, 3b, 03, 0
0, 00, 00, 00, 00, 00}
0114 Called: \_PR_.P001._PDC
  arg0: 0xffff8000001a1908 cnt:04 stk:00 buffer: 0c {01, 00, 00, 01, 00, 0
0, 00, 3b, 03, 00, 00}
  local0: 0xffff800000198588 cnt:01 stk:60 integer: c
  local1: 0xffff80000019ac88 cnt:01 stk:61 integer: 4
  local2: 0xffff80000019af88 cnt:01 stk:62 buffer: 0c {00, 00, 00, 00, 3b, 03,
 00, 00, 00, 00, 00, 00}
panic: aml_die aml_xparse:4019
Stopped at    Debugger+0x5:    leave
Debugger() at Debugger+0x5
panic() at panic+0x122
_aml_die() at _aml_die+0xdb
aml_xparse() at aml_xparse+0x1109
aml_xeval() at aml_xeval+0x128
aml_xparse() at aml_xparse+0x5a0
aml_xeval() at aml_xeval+0x128
aml_evalnode() at aml_evalnode+0x68
acpicpu_set_pdc() at acpicpu_set_pdc+0x89
acpicpc_attach() at config_attach+0x98
end trace frame: 0xffffffff80ce39b0, count: 0
"mach ddbcpu 1" hangs as well, so that's where this ends. Phew.

Hm, maybe I should append a dmesg without acpi too...

Last edited by lonerman; 14th June 2009 at 07:33 AM. Reason: Edit: One last worry added...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FreeBSD status report 2nd quarter 2008 J65nko FreeBSD General 1 21st August 2008 07:04 AM


All times are GMT. The time now is 09:53 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick