DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 28th January 2012
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,888
Thanked 190 Times in 160 Posts
Default X problems on a G3 iBook

Quote:
Originally Posted by daemonfowl View Post
how to set X the correct way ? two lines one vertical left and the other horizontal low cross the already small screen ..

by the way , when I installed openbsd 4.8 on this very ibook , this didn't happen and X nicely fills the screen ..
This last sentence is the most salient. Since none of us are there to look over your shoulder, we can only go by the information presented thus far which isn't very tangible.

The first place you should look is /var/log/Xorg.0.log which is where Xorg tracks what it thinks is going on. Posting its contents here may help us direct you forward.
Reply With Quote
  #2   (View Single Post)  
Old 28th January 2012
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,888
Thanked 190 Times in 160 Posts
Default

This thread has been split from its parent:

http://www.daemonforums.org/showthread.php?t=6751

daemonfowl, we have had this conversation twice before. Please limit threads to a single subject.
Reply With Quote
  #3   (View Single Post)  
Old 28th January 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Hi Ocicat ! thanks for your support

here is my dmesg ..
Code:
symbol table ]
console out [ATY,RageM3p29s]console in [keyboard] , using ADB
: memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.0 (GENERIC) #69: Wed Aug 17 10:17:02 MDT 2011
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 671088640 (640MB)
avail mem = 636624896 (607MB)
mainbus0 at root: model PowerBook4,1
cpu0 at mainbus0: 750 (Revision 0x2215): 499 MHz: 256KB backside cache
mem0 at mainbus0
spdmem0 at mem0: SDRAM non-parity PC66
spdmem1 at mem0: 512MB SDRAM non-parity PC133CL2
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
pgs0 at macgpio0: irq 55
"firewire-linkon" at macgpio0 not configured
"gpio1" at macgpio0 not configured
"gpio9" at macgpio0 not configured
"extint-gpio4" at macgpio0 not configured
"extint-gpio12" at macgpio0 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
tumbler0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 98% charged
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1517GAP>
wd0: 16-sector PIO, LBA, 14403MB, 29498112 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8176, MA24> ATAPI 5/cdrom removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:20:44:96
audio0 at tumbler0
tumbler0: tas3001_init: error
ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00
"Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address 00:03:93:45:ca:e2
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a swap on wd0b dump on wd0b
ugen0 at uhub1 port 2 "HCF USB V.90 Data/Fax Modem Apple internal modem" rev 1.10/1.00 addr 2
i2s_set_rate: timeout
i2s_set_rate: timeout
i2s_set_rate: timeout
i2s_set_rate: timeout
syncing disks... wd0b
[ using 490376 bytes of bsd ELF symbol table ]
console out [ATY,RageM3p29s]console in [keyboard] , using ADB
: memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.0 (GENERIC) #69: Wed Aug 17 10:17:02 MDT 2011
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 671088640 (640MB)
avail mem = 636624896 (607MB)
mainbus0 at root: model PowerBook4,1
cpu0 at mainbus0: 750 (Revision 0x2215): 499 MHz: 256KB backside cache
mem0 at mainbus0
spdmem0 at mem0: SDRAM non-parity PC66
spdmem1 at mem0: 512MB SDRAM non-parity PC133CL2
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
pgs0 at macgpio0: irq 55
"firewire-linkon" at macgpio0 not configured
"gpio1" at macgpio0 not configured
"gpio9" at macgpio0 not configured
"extint-gpio4" at macgpio0 not configured
"extint-gpio12" at macgpio0 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
tumbler0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 98% charged
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1517GAP>
wd0: 16-sector PIO, LBA, 14403MB, 29498112 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8176, MA24> ATAPI 5/cdrom removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:20:44:96
audio0 at tumbler0
tumbler0: tas3001_init: error
ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00
"Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address 00:03:93:45:ca:e2
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a swap on wd0b dump on wd0b
i2s_set_rate: timeout
i2s_set_rate: timeout
i2s_set_rate: timeout
i2s_set_rate: timeout

Last edited by ocicat; 28th January 2012 at 03:29 PM. Reason: Please use [code] & [/code] tags when posting command output.
Reply With Quote
  #4   (View Single Post)  
Old 28th January 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

as for /var/log/X.log.0 :

Code:
[613422.706] (--) Using wscons driver
[613422.850] 
X.Org X Server 1.9.5
Release Date: 2011-03-17
[613422.851] X Protocol Version 11, Revision 0
[613422.851] Build Operating System: OpenBSD 5.0 macppc 
[613422.851] Current Operating System: OpenBSD zenbeam.my.domain 5.0 GENERIC#69 macppc
[613422.853] Build Date: 11 August 2011  10:57:34AM
[613422.853]  
[613422.853] Current version of pixman: 0.22.2
[613422.853] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[613422.853] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[613422.854] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 28 22:45:17 2012
[613422.984] (II) Loader magic: 0x19e67b0
[613422.984] (II) Module ABI versions:
[613422.984] 	X.Org ANSI C Emulation: 0.4
[613422.984] 	X.Org Video Driver: 8.0
[613422.984] 	X.Org XInput driver : 11.0
[613422.984] 	X.Org Server Extension : 4.0
[613422.988] (--) PCI:*(0:0:16:0) 1002:4c46:1002:4c46 rev 2, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[613422.990] (==) Using default built-in configuration (12 lines)
[613422.990] (==) --- Start of built-in configuration ---
[613422.990] 	Section "Device"
[613422.990] 		Identifier	"Builtin Default ati Device 0"
[613422.990] 		Driver	"ati"
[613422.990] 	EndSection
[613422.990] 	Section "Screen"
[613422.990] 		Identifier	"Builtin Default ati Screen 0"
[613422.990] 		Device	"Builtin Default ati Device 0"
[613422.990] 	EndSection
[613422.990] 	Section "ServerLayout"
[613422.990] 		Identifier	"Builtin Default Layout"
[613422.990] 		Screen	"Builtin Default ati Screen 0"
[613422.990] 	EndSection
[613422.990] (==) --- End of built-in configuration ---
[613422.998] (==) ServerLayout "Builtin Default Layout"
[613422.999] (**) |-->Screen "Builtin Default ati Screen 0" (0)
[613422.999] (**) |   |-->Monitor "<default monitor>"
[613423.013] (**) |   |-->Device "Builtin Default ati Device 0"
[613423.014] (==) No monitor specified for screen "Builtin Default ati Screen 0".
	Using a default monitor configuration.
[613423.014] (==) Disabling SIGIO handlers for input devices
[613423.014] (==) Automatically adding devices
[613423.014] (==) Automatically enabling devices
[613423.306] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[613423.307] (==) ModulePath set to "/usr/X11R6/lib/modules"
[613423.307] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[613423.307] (II) LoadModule: "extmod"
[613423.380] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[613423.401] (II) Module extmod: vendor="X.Org Foundation"
[613423.403] 	compiled for 1.9.5, module version = 1.0.0
[613423.403] 	Module class: X.Org Server Extension
[613423.403] 	ABI class: X.Org Server Extension, version 4.0
[613423.403] (II) Loading extension MIT-SCREEN-SAVER
[613423.403] (II) Loading extension XFree86-VidModeExtension
[613423.403] (II) Loading extension XFree86-DGA
[613423.403] (II) Loading extension DPMS
[613423.403] (II) Loading extension XVideo
[613423.404] (II) Loading extension XVideo-MotionCompensation
[613423.404] (II) Loading extension X-Resource
[613423.404] (II) LoadModule: "dbe"
[613423.405] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[613423.437] (II) Module dbe: vendor="X.Org Foundation"
[613423.437] 	compiled for 1.9.5, module version = 1.0.0
[613423.437] 	Module class: X.Org Server Extension
[613423.437] 	ABI class: X.Org Server Extension, version 4.0
[613423.437] (II) Loading extension DOUBLE-BUFFER
[613423.438] (II) LoadModule: "glx"
[613423.439] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[613423.479] (II) Module glx: vendor="X.Org Foundation"
[613423.480] 	compiled for 1.9.5, module version = 1.0.0
[613423.480] 	ABI class: X.Org Server Extension, version 4.0
[613423.481] (==) AIGLX enabled
[613423.482] (II) Loading extension GLX
[613423.482] (II) LoadModule: "record"
[613423.484] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[613423.494] (II) Module record: vendor="X.Org Foundation"
[613423.494] 	compiled for 1.9.5, module version = 1.13.0
[613423.494] 	Module class: X.Org Server Extension
[613423.494] 	ABI class: X.Org Server Extension, version 4.0
[613423.494] (II) Loading extension RECORD
[613423.494] (II) LoadModule: "dri"
[613423.496] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[613423.524] (II) Module dri: vendor="X.Org Foundation"
[613423.525] 	compiled for 1.9.5, module version = 1.0.0
[613423.525] 	ABI class: X.Org Server Extension, version 4.0
[613423.526] (II) Loading extension XFree86-DRI
[613423.527] (II) LoadModule: "dri2"
[613423.529] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[613423.534] (II) Module dri2: vendor="X.Org Foundation"
[613423.534] 	compiled for 1.9.5, module version = 1.2.0
[613423.534] 	ABI class: X.Org Server Extension, version 4.0
[613423.534] (II) Loading extension DRI2
[613423.535] (II) LoadModule: "ati"
[613423.535] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
[613423.559] (II) Module ati: vendor="X.Org Foundation"
[613423.559] 	compiled for 1.9.5, module version = 6.12.2
[613423.559] 	Module class: X.Org Video Driver
[613423.559] 	ABI class: X.Org Video Driver, version 8.0
[613423.577] (II) LoadModule: "r128"
[613423.579] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
[613423.607] (II) Module r128: vendor="X.Org Foundation"
[613423.608] 	compiled for 1.9.5, module version = 6.8.1
[613423.608] 	Module class: X.Org Video Driver
[613423.608] 	ABI class: X.Org Video Driver, version 8.0
[613423.609] (II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
[613423.611] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[613423.612] (II) R128(0): PCI bus 0 card 16 func 0
[613423.612] (II) R128(0): Creating default Display subsection in Screen section
	"Builtin Default ati Screen 0" for depth/fbbpp 24/32
[613423.612] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[613423.612] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[613423.612] (==) R128(0): Default visual is TrueColor
[613423.613] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
[613423.616] (==) R128(0): RGB weight 888
[613423.616] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[613423.616] (--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46)
[613423.617] (--) R128(0): Linear framebuffer at 0x94000000
[613423.617] (--) R128(0): MMIO registers at 0x90000000
[613423.618] (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
[613423.618] (**) R128(0): Using flat panel for display
[613424.188] (WW) R128(0): Video BIOS not found!
[613424.188] (II) R128(0): Primary Display == Type 2
[613424.188] (WW) R128(0): Can't determine panel dimensions, and none specified.
	Disabling programming of FP registers.
[613424.189] (II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=10500
[613424.189] (II) Loading sub module "ddc"
[613424.189] (II) LoadModule: "ddc"
[613424.189] (II) Module "ddc" already built-in
[613424.207] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[613424.208] (II) R128(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
[613424.208] (II) R128(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[613424.208] (WW) R128(0): Unable to estimate virtual size
[613424.209] (II) R128(0): Clock range:  12.50 to 250.00 MHz
[613424.209] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
[613424.209] (II) R128(0): Not using default mode "320x175" (doublescan mode not supported)
[613424.209] (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
[613424.209] (II) R128(0): Not using default mode "320x200" (doublescan mode not supported)
[613424.209] (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
[613424.209] (II) R128(0): Not using default mode "360x200" (doublescan mode not supported)
[613424.209] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[613424.210] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[613424.210] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[613424.210] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[613424.210] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[613424.210] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[613424.210] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "1024x768i" (interlace mode not supported)
[613424.210] (II) R128(0): Not using default mode "512x384i" (interlace mode not supported)
[613424.210] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[613424.210] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[613424.210] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[613424.210] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[613424.210] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "576x432" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[613424.211] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[613424.211] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "832x624" (hsync out of range)
[613424.212] (II) R128(0): Not using default mode "416x312" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[613424.212] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[613424.212] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[613424.212] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[613424.212] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[613424.213] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[613424.213] (--) R128(0): Virtual size is 800x600 (pitch 800)
[613424.267] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[613424.267] (II) R128(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[613424.267] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[613424.268] (II) R128(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[613424.268] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[613424.268] (II) R128(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[613424.268] (==) R128(0): DPI set to (96, 96)
[613424.268] (II) Loading sub module "fb"
[613424.268] (II) LoadModule: "fb"
[613424.293] (II) Loading /usr/X11R6/lib/modules/libfb.so
[613424.322] (II) Module fb: vendor="X.Org Foundation"
[613424.322] 	compiled for 1.9.5, module version = 1.0.0
[613424.322] 	ABI class: X.Org ANSI C Emulation, version 0.4
[613424.322] (II) Loading sub module "ramdac"
[613424.322] (II) LoadModule: "ramdac"
[613424.323] (II) Module "ramdac" already built-in
[613424.323] (II) Loading sub module "xaa"
[613424.323] (II) LoadModule: "xaa"
[613424.327] (II) Loading /usr/X11R6/lib/modules/libxaa.so
[613424.415] (II) Module xaa: vendor="X.Org Foundation"
[613424.416] 	compiled for 1.9.5, module version = 1.2.1
[613424.416] 	ABI class: X.Org Video Driver, version 8.0
[613424.416] (II) Loading sub module "shadowfb"
[613424.416] (II) LoadModule: "shadowfb"
[613424.419] (II) Loading /usr/X11R6/lib/modules/libshadowfb.so
[613424.537] (II) Module shadowfb: vendor="X.Org Foundation"
[613424.537] 	compiled for 1.9.5, module version = 1.0.0
[613424.537] 	ABI class: X.Org ANSI C Emulation, version 0.4
[613424.537] (II) R128(0): Page flipping disabled
[613424.537] (!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
[613424.537] (--) Depth 24 pixmap format is 32 bpp
[613424.569] drmOpenDevice: node name is /dev/drm0
[613424.571] drmOpenDevice: open result is -1, (Operation not permitted)
[613424.571] drmOpenDevice: Open failed
[613424.572] drmOpenDevice: node name is /dev/drm0
[613424.572] drmOpenDevice: open result is -1, (Operation not permitted)
[613424.572] drmOpenDevice: Open failed
[613424.572] [drm] failed to load kernel module "r128"
[613424.572] (EE) [drm] drmOpen failed.
[613424.572] (EE) R128(0): [dri] DRIScreenInit failed.  Disabling DRI.
[613424.633] (II) R128(0): Memory manager initialized to (0,0) (800,2621)
[613424.633] (II) R128(0): Reserved area from (0,600) to (800,602)
[613424.634] (II) R128(0): Largest offscreen area available: 800 x 2019
[613424.636] (II) R128(0): Using XFree86 Acceleration Architecture (XAA)
[613424.636] 	Screen to screen bit blits
[613424.636] 	Solid filled rectangles
[613424.636] 	8x8 mono pattern filled rectangles
[613424.636] 	Indirect CPU to Screen color expansion
[613424.636] 	Solid Lines
[613424.636] 	Dashed Lines
[613424.636] 	Scanline Image Writes
[613424.639] 	Setting up tile and stipple cache:
[613424.640] 		32 128x128 slots
[613424.640] 		14 256x256 slots
[613424.641] (II) R128(0): Acceleration enabled
[613424.644] (==) R128(0): Backing store disabled
[613424.644] (==) R128(0): Silken mouse disabled
[613424.655] (II) R128(0): Using hardware cursor (scanline 2408)
[613424.655] (II) R128(0): Largest offscreen area available: 800 x 2016
[613424.697] (==) R128(0): DPMS enabled
[613424.701] (WW) R128(0): Direct rendering disabled
[613424.704] (==) RandR enabled
[613424.705] (II) Initializing built-in extension Generic Event Extension
[613424.705] (II) Initializing built-in extension SHAPE
[613424.705] (II) Initializing built-in extension MIT-SHM
[613424.705] (II) Initializing built-in extension XInputExtension
[613424.705] (II) Initializing built-in extension XTEST
[613424.705] (II) Initializing built-in extension BIG-REQUESTS
[613424.705] (II) Initializing built-in extension SYNC
[613424.705] (II) Initializing built-in extension XKEYBOARD
[613424.705] (II) Initializing built-in extension XC-MISC
[613424.705] (II) Initializing built-in extension SECURITY
[613424.705] (II) Initializing built-in extension XINERAMA
[613424.705] (II) Initializing built-in extension XFIXES
[613424.705] (II) Initializing built-in extension RENDER
[613424.705] (II) Initializing built-in extension RANDR
[613424.705] (II) Initializing built-in extension COMPOSITE
[613424.705] (II) Initializing built-in extension DAMAGE
[613424.823] (II) AIGLX: Screen 0 is not DRI2 capable
[613424.852] (II) AIGLX: Screen 0 is not DRI capable
[613425.118] (II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
[613425.119] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[613428.348] (II) config/wscons: checking input device /dev/wskbd
[613428.348] (II) wskbd: using layout us
[613428.349] (II) LoadModule: "kbd"
[613428.352] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[613428.367] (II) Module kbd: vendor="X.Org Foundation"
[613428.368] 	compiled for 1.9.5, module version = 1.6.0
[613428.368] 	Module class: X.Org XInput Driver
[613428.368] 	ABI class: X.Org XInput driver, version 11.0
[613428.368] (**) /dev/wskbd: always reports core events
[613428.368] (**) Option "Protocol" "standard"
[613428.369] (**) Option "XkbRules" "base"
[613428.369] (**) Option "XkbModel" "pc105"
[613428.369] (**) Option "XkbLayout" "us"
[613428.369] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD)
[613428.593] (II) config/wscons: checking input device /dev/wsmouse
[613428.593] (II) LoadModule: "mouse"
[613428.595] (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
[613428.600] (II) Module mouse: vendor="X.Org Foundation"
[613428.600] 	compiled for 1.9.5, module version = 1.7.0
[613428.600] 	Module class: X.Org XInput Driver
[613428.600] 	ABI class: X.Org XInput driver, version 11.0
[613428.601] (WW) /dev/wsmouse: No Device specified, looking for one...
[613428.602] (II) /dev/wsmouse: found Device "/dev/wsmouse"
[613428.602] (--) /dev/wsmouse: Device: "/dev/wsmouse"
[613428.602] (==) /dev/wsmouse: Protocol: "WSMouse"
[613428.602] (**) /dev/wsmouse: always reports core events
[613428.602] (**) Option "Device" "/dev/wsmouse"
[613428.604] (==) /dev/wsmouse: Emulate3Buttons, Emulate3Timeout: 50
[613428.604] (**) /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[613428.604] (**) /dev/wsmouse: Buttons: 9
[613428.605] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE)
[613428.606] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[613428.606] (**) /dev/wsmouse: (accel) acceleration profile 0
[613428.606] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[613428.606] (**) /dev/wsmouse: (accel) acceleration threshold: 4
I am not sure if a screenshot is needed .. on the right , about a quarter of the screen is black .. and part of what is going on the smallened screen appears duplicated below ..

Last edited by ocicat; 28th January 2012 at 03:30 PM. Reason: Please use [code] & [/code] tags when posting command output.
Reply With Quote
  #5   (View Single Post)  
Old 22nd February 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Hi ! guess what .. Ibook Screen is full and well-shaped now .. all I did was a nice upgrade to OpenBSD Current .. and text scrolling is relatively faster than before ..
so the only problem remaining is : wi0 .. I'm currently using gem0 ..

Didn't I Tell you OpenBSD rocked , rocks ! and continues to rock ! .. :-)

( I miss the easy Ctrl Alt Fn to open/change terminals .. so X is inevitable .. there is also a tiny bug related to caps .. for when you press the button it loses its assigned function .. so you're obliged to keep your finger on caps while typing input .. if only I were an arachne or squid .. mmm .. franz kafka's metamorphosis .. )

Last edited by daemonfowl; 22nd February 2012 at 04:36 AM.
Reply With Quote
  #6   (View Single Post)  
Old 22nd February 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

ibook's new Xorg.0.log after upgrade :
Code:
[2725604.840] (--) Using wscons driver
[2725604.933] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[2725604.934] X Protocol Version 11, Revision 0
[2725604.934] Build Operating System: OpenBSD 5.1 macppc 
[2725604.934] Current Operating System: OpenBSD zenbsd.my.domain 5.1 GENERIC#150 macppc
[2725604.935] Build Date: 11 February 2012  10:56:27PM
[2725604.936]  
[2725604.936] Current version of pixman: 0.22.2
[2725604.936] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[2725604.936] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[2725604.937] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 09:28:19 2012
[2725604.992] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[2725604.997] (==) No Layout section.  Using the first Screen section.
[2725604.998] (==) No screen section available. Using defaults.
[2725604.998] (**) |-->Screen "Default Screen Section" (0)
[2725604.998] (**) |   |-->Monitor "<default monitor>"
[2725605.001] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[2725605.001] (==) Disabling SIGIO handlers for input devices
[2725605.001] (==) Automatically adding devices
[2725605.001] (==) Automatically enabling devices
[2725605.182] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[2725605.182] (==) ModulePath set to "/usr/X11R6/lib/modules"
[2725605.182] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[2725605.195] (II) Loader magic: 0x19e1598
[2725605.195] (II) Module ABI versions:
[2725605.195] 	X.Org ANSI C Emulation: 0.4
[2725605.195] 	X.Org Video Driver: 11.0
[2725605.196] 	X.Org XInput driver : 13.0
[2725605.196] 	X.Org Server Extension : 6.0
[2725605.201] (--) PCI:*(0:0:16:0) 1002:4c46:1002:4c46 rev 2, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[2725605.202] (II) LoadModule: "extmod"
[2725605.236] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[2725605.247] (II) Module extmod: vendor="X.Org Foundation"
[2725605.248] 	compiled for 1.11.4, module version = 1.0.0
[2725605.248] 	Module class: X.Org Server Extension
[2725605.249] 	ABI class: X.Org Server Extension, version 6.0
[2725605.249] (II) Loading extension MIT-SCREEN-SAVER
[2725605.249] (II) Loading extension XFree86-VidModeExtension
[2725605.249] (II) Loading extension XFree86-DGA
[2725605.249] (II) Loading extension DPMS
[2725605.249] (II) Loading extension XVideo
[2725605.249] (II) Loading extension XVideo-MotionCompensation
[2725605.249] (II) Loading extension X-Resource
[2725605.249] (II) LoadModule: "dbe"
[2725605.250] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[2725605.255] (II) Module dbe: vendor="X.Org Foundation"
[2725605.255] 	compiled for 1.11.4, module version = 1.0.0
[2725605.255] 	Module class: X.Org Server Extension
[2725605.255] 	ABI class: X.Org Server Extension, version 6.0
[2725605.256] (II) Loading extension DOUBLE-BUFFER
[2725605.256] (II) LoadModule: "glx"
[2725605.257] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[2725605.271] (II) Module glx: vendor="X.Org Foundation"
[2725605.272] 	compiled for 1.11.4, module version = 1.0.0
[2725605.272] 	ABI class: X.Org Server Extension, version 6.0
[2725605.273] (==) AIGLX enabled
[2725605.273] (II) Loading extension GLX
[2725605.274] (II) LoadModule: "record"
[2725605.276] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[2725605.281] (II) Module record: vendor="X.Org Foundation"
[2725605.281] 	compiled for 1.11.4, module version = 1.13.0
[2725605.281] 	Module class: X.Org Server Extension
[2725605.281] 	ABI class: X.Org Server Extension, version 6.0
[2725605.281] (II) Loading extension RECORD
[2725605.282] (II) LoadModule: "dri"
[2725605.283] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[2725605.295] (II) Module dri: vendor="X.Org Foundation"
[2725605.296] 	compiled for 1.11.4, module version = 1.0.0
[2725605.296] 	ABI class: X.Org Server Extension, version 6.0
[2725605.297] (II) Loading extension XFree86-DRI
[2725605.298] (II) LoadModule: "dri2"
[2725605.299] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[2725605.304] (II) Module dri2: vendor="X.Org Foundation"
[2725605.304] 	compiled for 1.11.4, module version = 1.2.0
[2725605.304] 	ABI class: X.Org Server Extension, version 6.0
[2725605.305] (II) Loading extension DRI2
[2725605.305] (==) Matched ati as autoconfigured driver 0
[2725605.305] (==) Assigned the driver to the xf86ConfigLayout
[2725605.305] (II) LoadModule: "ati"
[2725605.306] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
[2725605.309] (II) Module ati: vendor="X.Org Foundation"
[2725605.309] 	compiled for 1.11.4, module version = 6.12.2
[2725605.309] 	Module class: X.Org Video Driver
[2725605.309] 	ABI class: X.Org Video Driver, version 11.0
[2725605.310] (II) LoadModule: "r128"
[2725605.311] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
[2725605.331] (II) Module r128: vendor="X.Org Foundation"
[2725605.332] 	compiled for 1.11.4, module version = 6.8.1
[2725605.332] 	Module class: X.Org Video Driver
[2725605.332] 	ABI class: X.Org Video Driver, version 11.0
[2725605.333] (II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
[2725605.335] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
[2725605.337] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[2725605.337] (II) R128(0): PCI bus 0 card 16 func 0
[2725605.337] (II) R128(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[2725605.338] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[2725605.338] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[2725605.338] (==) R128(0): Default visual is TrueColor
[2725605.338] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
[2725605.339] (==) R128(0): RGB weight 888
[2725605.339] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[2725605.339] (--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46)
[2725605.339] (--) R128(0): Linear framebuffer at 0x94000000
[2725605.339] (--) R128(0): MMIO registers at 0x90000000
[2725605.340] (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
[2725605.340] (**) R128(0): Using flat panel for display
[2725605.483] (WW) R128(0): Video BIOS not found!
[2725605.483] (II) R128(0): Primary Display == Type 2
[2725605.483] (WW) R128(0): Can't determine panel dimensions, and none specified.
	Disabling programming of FP registers.
[2725605.484] (II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=10500
[2725605.484] (II) Loading sub module "ddc"
[2725605.484] (II) LoadModule: "ddc"
[2725605.484] (II) Module "ddc" already built-in
[2725605.485] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[2725605.486] (II) R128(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[2725605.486] (II) R128(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[2725605.486] (II) R128(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[2725605.486] (WW) R128(0): Unable to estimate virtual size
[2725605.486] (II) R128(0): Clock range:  12.50 to 250.00 MHz
[2725605.487] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x175" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x200" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "360x200" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[2725605.488] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[2725605.488] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768i" (interlace mode not supported)
[2725605.488] (II) R128(0): Not using default mode "512x384i" (interlace mode not supported)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "576x432" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[2725605.489] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[2725605.489] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[2725605.489] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "832x624" (hsync out of range)
[2725605.490] (II) R128(0): Not using default mode "416x312" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[2725605.490] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[2725605.490] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[2725605.491] (--) R128(0): Virtual size is 1024x768 (pitch 1024)
[2725605.491] (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[2725605.491] (II) R128(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[2725605.491] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[2725605.491] (II) R128(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[2725605.491] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[2725605.492] (II) R128(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[2725605.492] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[2725605.492] (II) R128(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[2725605.492] (==) R128(0): DPI set to (96, 96)
[2725605.492] (II) Loading sub module "fb"
[2725605.492] (II) LoadModule: "fb"
[2725605.498] (II) Loading /usr/X11R6/lib/modules/libfb.so
[2725605.572] (II) Module fb: vendor="X.Org Foundation"
[2725605.572] 	compiled for 1.11.4, module version = 1.0.0
[2725605.573] 	ABI class: X.Org ANSI C Emulation, version 0.4
[2725605.573] (II) Loading sub module "ramdac"
[2725605.573] (II) LoadModule: "ramdac"
[2725605.573] (II) Module "ramdac" already built-in
[2725605.573] (II) Loading sub module "xaa"
[2725605.573] (II) LoadModule: "xaa"
[2725605.577] (II) Loading /usr/X11R6/lib/modules/libxaa.so
[2725605.610] (II) Module xaa: vendor="X.Org Foundation"
[2725605.611] 	compiled for 1.11.4, module version = 1.2.1
[2725605.611] 	ABI class: X.Org Video Driver, version 11.0
[2725605.611] (II) Loading sub module "shadowfb"
[2725605.611] (II) LoadModule: "shadowfb"
[2725605.615] (II) Loading /usr/X11R6/lib/modules/libshadowfb.so
[2725605.636] (II) Module shadowfb: vendor="X.Org Foundation"
[2725605.636] 	compiled for 1.11.4, module version = 1.0.0
[2725605.636] 	ABI class: X.Org ANSI C Emulation, version 0.4
[2725605.636] (II) R128(0): Page flipping disabled
[2725605.636] (!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
[2725605.636] (--) Depth 24 pixmap format is 32 bpp
[2725605.662] (WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
[2725605.680] (II) R128(0): Memory manager initialized to (0,0) (1024,2048)
[2725605.680] (II) R128(0): Reserved area from (0,768) to (1024,770)
[2725605.680] (II) R128(0): Largest offscreen area available: 1024 x 1278
[2725605.683] (II) R128(0): Using XFree86 Acceleration Architecture (XAA)
[2725605.683] 	Screen to screen bit blits
[2725605.683] 	Solid filled rectangles
[2725605.683] 	8x8 mono pattern filled rectangles
[2725605.684] 	Indirect CPU to Screen color expansion
[2725605.684] 	Solid Lines
[2725605.684] 	Dashed Lines
[2725605.684] 	Scanline Image Writes
[2725605.686] 	Setting up tile and stipple cache:
[2725605.686] 		32 128x128 slots
[2725605.686] 		10 256x256 slots
[2725605.687] (II) R128(0): Acceleration enabled
[2725605.689] (==) R128(0): Backing store disabled
[2725605.689] (==) R128(0): Silken mouse disabled
[2725605.695] (II) R128(0): Using hardware cursor (scanline 3080)
[2725605.695] (II) R128(0): Largest offscreen area available: 1024 x 1276
[2725605.703] (==) R128(0): DPMS enabled
[2725605.706] (WW) R128(0): Direct rendering disabled
[2725605.709] (==) RandR enabled
[2725605.710] (II) Initializing built-in extension Generic Event Extension
[2725605.710] (II) Initializing built-in extension SHAPE
[2725605.710] (II) Initializing built-in extension MIT-SHM
[2725605.710] (II) Initializing built-in extension XInputExtension
[2725605.710] (II) Initializing built-in extension XTEST
[2725605.710] (II) Initializing built-in extension BIG-REQUESTS
[2725605.710] (II) Initializing built-in extension SYNC
[2725605.710] (II) Initializing built-in extension XKEYBOARD
[2725605.710] (II) Initializing built-in extension XC-MISC
[2725605.710] (II) Initializing built-in extension SECURITY
[2725605.710] (II) Initializing built-in extension XINERAMA
[2725605.710] (II) Initializing built-in extension XFIXES
[2725605.710] (II) Initializing built-in extension RENDER
[2725605.710] (II) Initializing built-in extension RANDR
[2725605.711] (II) Initializing built-in extension COMPOSITE
[2725605.711] (II) Initializing built-in extension DAMAGE
[2725605.799] (II) AIGLX: Screen 0 is not DRI2 capable
[2725605.800] (II) AIGLX: Screen 0 is not DRI capable
[2725606.095] (II) AIGLX: Loaded and initialized swrast
[2725606.096] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[2725608.680] (II) config/wscons: checking input device /dev/wskbd
[2725608.681] (II) wskbd: using layout us
[2725608.681] (II) wskbd: using model macintosh
[2725608.682] (II) LoadModule: "kbd"
[2725608.685] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[2725608.701] (II) Module kbd: vendor="X.Org Foundation"
[2725608.701] 	compiled for 1.11.4, module version = 1.6.1
[2725608.701] 	Module class: X.Org XInput Driver
[2725608.701] 	ABI class: X.Org XInput driver, version 13.0
[2725608.701] (II) Using input driver 'kbd' for '/dev/wskbd'
[2725608.701] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[2725608.702] (**) /dev/wskbd: always reports core events
[2725608.703] (**) /dev/wskbd: always reports core events
[2725608.703] (**) Option "Protocol" "standard"
[2725608.703] (**) Option "XkbRules" "base"
[2725608.703] (**) Option "XkbModel" "macintosh"
[2725608.703] (**) Option "XkbLayout" "us"
[2725608.703] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[2725608.962] (II) config/wscons: checking input device /dev/wsmouse
[2725608.962] (II) LoadModule: "ws"
[2725608.965] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[2725608.980] (II) Module ws: vendor="X.Org Foundation"
[2725608.980] 	compiled for 1.11.4, module version = 1.3.0
[2725608.980] 	Module class: X.Org XInput Driver
[2725608.980] 	ABI class: X.Org XInput driver, version 13.0
[2725608.980] (II) Using input driver 'ws' for '/dev/wsmouse'
[2725608.981] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[2725608.981] (**) /dev/wsmouse: always reports core events
[2725608.982] (II) ws: /dev/wsmouse: debuglevel 0
[2725608.982] (**) Option "Device" "/dev/wsmouse"
[2725608.982] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[2725608.983] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[2725608.983] (**) ws: /dev/wsmouse: associated screen: 0
[2725608.983] (II) ws: /dev/wsmouse: minimum x position: 0
[2725608.984] (II) ws: /dev/wsmouse: maximum x position: 1023
[2725608.984] (II) ws: /dev/wsmouse: minimum y position: 0
[2725608.984] (II) ws: /dev/wsmouse: maximum y position: 767
[2725608.984] (==) ws: /dev/wsmouse: Buttons: 7
[2725608.984] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[2725608.984] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[2725608.987] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[2725608.987] (**) /dev/wsmouse: (accel) acceleration profile 0
[2725608.987] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[2725608.987] (**) /dev/wsmouse: (accel) acceleration threshold: 4
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A Newbie installation adventure targetting an old ibook G3 daemonfowl OpenBSD Installation and Upgrading 12 30th January 2012 01:26 PM
three problems :) craze OpenBSD Packages and Ports 6 6th March 2011 03:26 PM
Mount USB Problems codeFreak OpenBSD General 2 16th February 2011 08:34 PM
GDM Problems Saint OpenBSD Packages and Ports 4 29th August 2010 09:42 AM
ATI DRI problems harisman FreeBSD General 16 11th May 2008 05:12 PM


All times are GMT. The time now is 12:42 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick