DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD Installation and Upgrading

FreeBSD Installation and Upgrading Installing and upgrading FreeBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 2nd August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default The kernel is angry!

So I am attempting a source upgrade from FreeBSD 6.3 to FreeBSD 7.0-p3, and the world and kernel compiled fine, but when I ran make installkernel:
Code:
===> zyd (install)
install -o root -g wheel -m 555   if_zyd.ko /boot/kernel
install -o root -g wheel -m 555   if_zyd.ko.symbols /boot/kernel
kldxref /boot/kernel
kldxref: file isn't dynamically-linked
kldxref: unknown metdata record 0 in file aac.ko.symbols
kldxref: unknown metdata record 0 in file aac.ko.symbols
kldxref: unknown metdata record 0 in file aac.ko.symbols
kldxref: unknown metdata record 0 in file aac.ko.symbols
...
kldxref: unknown metdata record 0 in file wlan_ccmp.ko.symbols
kldxref: unknown metdata record 0 in file wlan_tkip.ko.symbols
kldxref: unknown metdata record 0 in file wlan_tkip.ko.symbols
kldxref: unknown metdata record 0 in file wlan_tkip.ko.symbols
kldxref: unknown metdata record 0 in file wlan_wep.ko.symbols
kldxref: unknown metdata record 0 in file wlan_wep.ko.symbols
kldxref: unknown metdata record 0 in file wlan_wep.ko.symbols
kldxref: unknown metdata record 0 in file wlan_xauth.ko.symbols
kldxref: unknown metdata record 0 in file wlan_xauth.ko.symbols
kldxref: unknown metdata record 0 in file wlan_xauth.ko.symbols
kldxref: unknown metdata record 0 in file if_wpi.ko.symbols
kldxref: unknown metdata record 0 in file if_wpi.ko.symbols
kldxref: unknown metdata record 0 in file if_wpi.ko.symbols
kldxref: unknown metdata record 0 in file if_wpi.ko.symbols
kldxref: unknown metdata record 0 in file if_wpi.ko.symbols
kldxref: unknown metdata record 0 in file wpifw.ko.symbols
kldxref: unknown metdata record 0 in file wpifw.ko.symbols
kldxref: unknown metdata record 0 in file wpifw.ko.symbols
kldxref: unknown metdata record 0 in file xfs.ko.symbols
kldxref: unknown metdata record 0 in file if_xl.ko.symbols
kldxref: unknown metdata record 0 in file if_xl.ko.symbols
kldxref: unknown metdata record 0 in file if_xl.ko.symbols
kldxref: unknown metdata record 0 in file if_xl.ko.symbols
kldxref: unknown metdata record 0 in file if_xl.ko.symbols
kldxref: unknown metdata record 0 in file if_xl.ko.symbols
kldxref: unknown metdata record 0 in file zfs.ko.symbols
kldxref: unknown metdata record 0 in file zfs.ko.symbols
kldxref: unknown metdata record 0 in file zfs.ko.symbols
kldxref: unknown metdata record 0 in file zfs.ko.symbols
kldxref: unknown metdata record 0 in file zlib.ko.symbols
kldxref: unknown metdata record 0 in file zlib.ko.symbols
kldxref: unknown metdata record 0 in file if_zyd.ko.symbols
kldxref: unknown metdata record 0 in file if_zyd.ko.symbols
kldxref: unknown metdata record 0 in file if_zyd.ko.symbols
kldxref: unknown metdata record 0 in file if_zyd.ko.symbols
There were a lot more of these lines but daemonforums kept saying my message was 'too short' if I posted the whole thing...

Is it okay to continue (reboot) or will this break my system? My machine is far away and I can't fix it for ~3 months if it won't boot.
My kernel config:
Code:
$ cat RELNKERN7

cpu             HAMMER
ident           GENERIC

# To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         # Default places to look for devices.

makeoptions     DEBUG=-g                # Build kernel with gdb(1) debug symbols

options         SCHED_ULE               # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
options         INET6                   # IPv6 communications protocols
options         SCTP                    # Stream Control Transmission Protocol
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
options         UFS_GJOURNAL            # Enable gjournal-based UFS journaling
options         MD_ROOT                 # MD is a potential root device
options         NFSCLIENT               # Network Filesystem Client
options         NFSSERVER               # Network Filesystem Server
options         NFS_ROOT                # NFS usable as /, requires NFSCLIENT
options         NTFS                    # NT File System
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_PART_GPT           # GUID Partition Tables.
options         GEOM_LABEL              # Provides labelization
options         COMPAT_43TTY            # BSD 4.3 TTY compat [KEEP THIS!]
options         COMPAT_IA32             # Compatible with i386 binaries
#options        COMPAT_FREEBSD4         # Compatible with FreeBSD4
#options        COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         COMPAT_FREEBSD6         # Compatible with FreeBSD6
options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
options         STOP_NMI                # Stop CPUS using NMI instead of IPI
options         AUDIT                   # Security event auditing

# Make an SMP-capable kernel by default
#options        SMP                     # Symmetric MultiProcessor Kernel

# CPU frequency control
device          cpufreq

# Bus support.
device          acpi
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
#device         atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
#device         ahc             # AHA2940 and onboard AIC7xxx devices
#options        AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
#device         ahd             # AHA39320/29320 and onboard AIC79xx devices
#options        AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
#device         amd             # AMD 53C974 (Tekram DC-390(T))
#device         hptiop          # Highpoint RocketRaid 3xxx series
#device         isp             # Qlogic family
#device         ispfw           # Firmware for QLogic HBAs- normally a module
#device         mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
#device         sym             # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device         trm             # Tekram DC395U/UW/F DC315U adapters

#device         adv             # Advansys SCSI adapters
#device         adw             # Advansys wide SCSI adapters
#device         aic             # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device         bt              # Buslogic/Mylex MultiMaster SCSI adapters


# SCSI peripherals
device          scbus           # SCSI bus (required for SCSI)
#device         ch              # SCSI media changers
device          da              # Direct Access (disks)
#device         sa              # Sequential Access (tape etc)
#device         cd              # CD
device          pass            # Passthrough device (direct SCSI access)
#device         ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device         amr             # AMI MegaRAID
#device         arcmsr          # Areca SATA II RAID
#device         ciss            # Compaq Smart RAID 5*
#device         dpt             # DPT Smartcache III, IV - See NOTES for options
#device         hptmv           # Highpoint RocketRAID 182x
#device         hptrr           # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device         iir             # Intel Integrated RAID
#device         ips             # IBM (Adaptec) ServeRAID
#device         mly             # Mylex AcceleRAID/eXtremeRAID
#device         twa             # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device         aac             # Adaptec FSA RAID
#device         aacp            # SCSI passthrough for aac (requires CAM)
#device         ida             # Compaq Smart RAID
#device         mfi             # LSI MegaRAID SAS
#device         mlx             # Mylex DAC960 family
#XXX pointer/int warnings
#device         pst             # Promise Supertrak SX6000
#device         twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          kbdmux          # keyboard multiplexer

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

device          agp             # support several AGP chipsets

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device         cbb             # cardbus (yenta) bridge
#device         pccard          # PC Card (16-bit) bus
#device         cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
#device         sio             # 8250, 16[45]50 based serial ports
#device         uart            # Generic UART driver

# Parallel port
#device         ppc
#device         ppbus           # Parallel port bus (required)
#device         lpt             # Printer
#device         plip            # TCP/IP over parallel
#device         ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
#device         em              # Intel PRO/1000 adapter Gigabit Ethernet Card
#device         ixgb            # Intel PRO/10GbE Ethernet Card
#device         le              # AMD Am7900 LANCE and Am79C9xx PCnet
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         bce             # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
#device         bge             # Broadcom BCM570xx Gigabit Ethernet
device          dc              # DEC/Intel 21143 and various workalikes
#device         fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         lge             # Level 1 LXT1001 gigabit Ethernet
#device         msk             # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device         nfe             # nVidia nForce MCP on-board Ethernet
#device         nge             # NatSemi DP83820 gigabit Ethernet
#device         nve             # nVidia nForce MCP on-board Ethernet Networking
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over 'le')
device          re              # RealTek 8139C+/8169/8169S/8110S
#device         rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit Ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device         cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         sn              # SMC's 9000 series of Ethernet chips
#device         xe              # Xircom pccard Ethernet

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         wlan_wep        # 802.11 WEP support
#device         wlan_ccmp       # 802.11 CCMP support
#device         wlan_tkip       # 802.11 TKIP support
#device         wlan_amrr       # AMRR transmit rate control algorithm
#device         wlan_scan_ap    # 802.11 AP mode scanning
#device         wlan_scan_sta   # 802.11 STA mode scanning
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         ath             # Atheros pci/cardbus NIC's
#device         ath_hal         # Atheros HAL (Hardware Access Layer)
#device         ath_rate_sample # SampleRate tx rate control for ath
#device         awi             # BayStack 660 and others
#device         ral             # Ralink Technology RT2500 wireless NICs.
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)
device          firmware        # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          ehci            # EHCI PCI->USB interface (USB 2.0)
device          usb             # USB Bus (required)
device          udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
#device         ural            # Ralink Technology RT2500USB wireless NICs
#device         urio            # Diamond Rio 500 MP3 player
#device         uscanner        # Scanners
# USB Ethernet, requires miibus
#device         aue             # ADMtek USB Ethernet
#device         axe             # ASIX Electronics USB Ethernet
#device         cdce            # Generic USB over Ethernet
#device         cue             # CATC USB Ethernet
#device         kue             # Kawasaki LSI USB Ethernet
#device         rue             # RealTek RTL8150 USB Ethernet

# FireWire support
#device         firewire        # FireWire bus code
#device         sbp             # SCSI over FireWire (Requires scbus and da)
#device         fwe             # Ethernet over FireWire (non-standard!)
#device         fwip            # IP over FireWire (RFC 2734,3146)
#device         dcons           # Dumb console driver
#device         dcons_crom      # Configuration ROM for dcons

# I forgot what this is for but I added it so I must need it...
options         NETGRAPH                # for udbp (USB double-pipe driver)

# These are for OpenVPN
device          tap             # virtual ethernet device
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.
Reply With Quote
  #2   (View Single Post)  
Old 2nd August 2008
graudeejs's Avatar
graudeejs graudeejs is offline
Real Name: Aldis Berjoza
formerly killasmurf86
 
Join Date: Jul 2008
Location: Riga, Latvia
Posts: 588
Thanked 29 Times in 26 Posts
Default

Dude you configured kernel wrong from start
wtf is this:
Code:
cpu             HAMMER
ident           GENERIC
it should be (i assume you have x86 system):
Code:
machine i386
cpu I686_CPU
ident MyPcWhateverYouCalllIt
If you have older than Pentium machine, use I586_CPU or I486_CPU

And Save your config as MyPcWhateverYouCalllIt

cd to /usr/src and:
Code:
make kernel KERNCONF=MyPcWhateverYouCallIt
and then reboot (with luck it would work fine)

In case you are afraid that your kernel might not boot
just compile GENERIC kernel


http://www2.lv.freebsd.org/doc/en_US...ig-config.html
http://www2.lv.freebsd.org/doc/en_US...om-kernel.html


P.S. Nice topic name

Last edited by graudeejs; 2nd August 2008 at 09:39 AM.
Reply With Quote
  #3   (View Single Post)  
Old 2nd August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default

This is an amd64 machine. I noticed that my old 6.x kernel had such a 'machine amd64' line but the GENERIC /usr/src/sys/amd64/conf/GENERIC had no such line so I figured it had been knocked out for 7.x. Are you sure that is valid for 7.x?
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.
Reply With Quote
  #4   (View Single Post)  
Old 2nd August 2008
graudeejs's Avatar
graudeejs graudeejs is offline
Real Name: Aldis Berjoza
formerly killasmurf86
 
Join Date: Jul 2008
Location: Riga, Latvia
Posts: 588
Thanked 29 Times in 26 Posts
Default

Oh, I think it's ok, cause it's separate architecture
currently i can't tell much about it, cause i'm on win machine....

Try it
but then use
make buildkernel KERNCONF=.....
make installkernel KERNCONF=.....

If it fails use machine i386

Note that you have to do this in /usr/src/sys/amd64/conf/
or for 2nd chouse /usr/src/sys/i386/conf/
(i'm guessing, i never configured kernel for other than i386, but i think it's right)

Last edited by graudeejs; 2nd August 2008 at 09:52 AM.
Reply With Quote
  #5   (View Single Post)  
Old 2nd August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default

Yes, that is precisely how I compiled it.
Any other ideas?
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.
Reply With Quote
  #6   (View Single Post)  
Old 2nd August 2008
graudeejs's Avatar
graudeejs graudeejs is offline
Real Name: Aldis Berjoza
formerly killasmurf86
 
Join Date: Jul 2008
Location: Riga, Latvia
Posts: 588
Thanked 29 Times in 26 Posts
Default

Quote:
Originally Posted by Weaseal View Post
Yes, that is precisely how I compiled it.
Any other ideas?
did you already fixed what i posted in 1st post?

also show me 1st few lines of generic amd64 kernel
Reply With Quote
  #7   (View Single Post)  
Old 2nd August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default

No I didn't add any 'machine' lines, I figured adding things that didn't exist in the GENERIC kernel would be a bad idea. Right now I'm recompiling with GENERIC just to have something.

Here's its config:
Code:
$ cat /usr/src/sys/amd64/conf/GENERIC
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.484.2.2.2.1 2008/02/06 03:24:28 scottl Exp $

cpu             HAMMER
ident           GENERIC

# To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         # Default places to look for devices.

makeoptions     DEBUG=-g                # Build kernel with gdb(1) debug symbols

options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
options         INET6                   # IPv6 communications protocols
options         SCTP                    # Stream Control Transmission Protocol
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
options         UFS_GJOURNAL            # Enable gjournal-based UFS journaling
options         MD_ROOT                 # MD is a potential root device
options         NFSCLIENT               # Network Filesystem Client
options         NFSSERVER               # Network Filesystem Server
options         NFS_ROOT                # NFS usable as /, requires NFSCLIENT
options         NTFS                    # NT File System
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_PART_GPT           # GUID Partition Tables.
options         GEOM_LABEL              # Provides labelization
options         COMPAT_43TTY            # BSD 4.3 TTY compat [KEEP THIS!]
options         COMPAT_IA32             # Compatible with i386 binaries
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         COMPAT_FREEBSD6         # Compatible with FreeBSD6
options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
options         STOP_NMI                # Stop CPUS using NMI instead of IPI
options         AUDIT                   # Security event auditing

# Make an SMP-capable kernel by default
options         SMP                     # Symmetric MultiProcessor Kernel

# CPU frequency control
device          cpufreq

# Bus support.
device          acpi
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
device          atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
device          ahc             # AHA2940 and onboard AIC7xxx devices
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
device          ahd             # AHA39320/29320 and onboard AIC79xx devices
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
device          amd             # AMD 53C974 (Tekram DC-390(T))
device          hptiop          # Highpoint RocketRaid 3xxx series
device          isp             # Qlogic family
#device         ispfw           # Firmware for QLogic HBAs- normally a module
device          mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets + those of `ncr')
device          trm             # Tekram DC395U/UW/F DC315U adapters

device          adv             # Advansys SCSI adapters
device          adw             # Advansys wide SCSI adapters
device          aic             # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device          bt              # Buslogic/Mylex MultiMaster SCSI adapters


# SCSI peripherals
device          scbus           # SCSI bus (required for SCSI)
device          ch              # SCSI media changers
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
device          ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device          amr             # AMI MegaRAID
device          arcmsr          # Areca SATA II RAID
device          ciss            # Compaq Smart RAID 5*
device          dpt             # DPT Smartcache III, IV - See NOTES for options
device          hptmv           # Highpoint RocketRAID 182x
device          hptrr           # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device          iir             # Intel Integrated RAID
device          ips             # IBM (Adaptec) ServeRAID
device          mly             # Mylex AcceleRAID/eXtremeRAID
device          twa             # 3ware 9000 series PATA/SATA RAID

# RAID controllers
device          aac             # Adaptec FSA RAID
device          aacp            # SCSI passthrough for aac (requires CAM)
device          ida             # Compaq Smart RAID
device          mfi             # LSI MegaRAID SAS
device          mlx             # Mylex DAC960 family
#XXX pointer/int warnings
#device         pst             # Promise Supertrak SX6000
device          twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          kbdmux          # keyboard multiplexer

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

device          agp             # support several AGP chipsets

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device          cbb             # cardbus (yenta) bridge
device          pccard          # PC Card (16-bit) bus
device          cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports
device          uart            # Generic UART driver

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device          em              # Intel PRO/1000 adapter Gigabit Ethernet Card
device          ixgb            # Intel PRO/10GbE Ethernet Card
device          le              # AMD Am7900 LANCE and Am79C9xx PCnet
device          txp             # 3Com 3cR990 (``Typhoon'')
device          vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          bce             # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device          bfe             # Broadcom BCM440x 10/100 Ethernet
device          bge             # Broadcom BCM570xx Gigabit Ethernet
device          dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
device          lge             # Level 1 LXT1001 gigabit Ethernet
device          msk             # Marvell/SysKonnect Yukon II Gigabit Ethernet
device          nfe             # nVidia nForce MCP on-board Ethernet
device          nge             # NatSemi DP83820 gigabit Ethernet
#device         nve             # nVidia nForce MCP on-board Ethernet Networking
device          pcn             # AMD Am79C97x PCI 10/100 (precedence over 'le')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
device          sf              # Adaptec AIC-6915 (``Starfire'')
device          sis             # Silicon Integrated Systems SiS 900/SiS 7016
device          sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
device          ste             # Sundance ST201 (D-Link DFE-550TX)
device          ti              # Alteon Networks Tigon I/II gigabit Ethernet
device          tl              # Texas Instruments ThunderLAN
device          tx              # SMC EtherPower II (83c170 ``EPIC'')
device          vge             # VIA VT612x gigabit Ethernet
device          vr              # VIA Rhine, Rhine II
device          wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
device          cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device          ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device          ex              # Intel EtherExpress Pro/10 and Pro/10+
device          ep              # Etherlink III based cards
device          fe              # Fujitsu MB8696x based cards
device          sn              # SMC's 9000 series of Ethernet chips
device          xe              # Xircom pccard Ethernet

# Wireless NIC cards
device          wlan            # 802.11 support
device          wlan_wep        # 802.11 WEP support
device          wlan_ccmp       # 802.11 CCMP support
device          wlan_tkip       # 802.11 TKIP support
device          wlan_amrr       # AMRR transmit rate control algorithm
device          wlan_scan_ap    # 802.11 AP mode scanning
device          wlan_scan_sta   # 802.11 STA mode scanning
device          an              # Aironet 4500/4800 802.11 wireless NICs.
device          ath             # Atheros pci/cardbus NIC's
device          ath_hal         # Atheros HAL (Hardware Access Layer)
device          ath_rate_sample # SampleRate tx rate control for ath
device          awi             # BayStack 660 and others
device          ral             # Ralink Technology RT2500 wireless NICs.
device          wi              # WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)
device          firmware        # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          ehci            # EHCI PCI->USB interface (USB 2.0)
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          ural            # Ralink Technology RT2500USB wireless NICs
device          urio            # Diamond Rio 500 MP3 player
device          uscanner        # Scanners
# USB Ethernet, requires miibus
device          aue             # ADMtek USB Ethernet
device          axe             # ASIX Electronics USB Ethernet
device          cdce            # Generic USB over Ethernet
device          cue             # CATC USB Ethernet
device          kue             # Kawasaki LSI USB Ethernet
device          rue             # RealTek RTL8150 USB Ethernet

# FireWire support
device          firewire        # FireWire bus code
device          sbp             # SCSI over FireWire (Requires scbus and da)
device          fwe             # Ethernet over FireWire (non-standard!)
device          fwip            # IP over FireWire (RFC 2734,3146)
device          dcons           # Dumb console driver
device          dcons_crom      # Configuration ROM for dcons
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.
Reply With Quote
  #8   (View Single Post)  
Old 2nd August 2008
graudeejs's Avatar
graudeejs graudeejs is offline
Real Name: Aldis Berjoza
formerly killasmurf86
 
Join Date: Jul 2008
Location: Riga, Latvia
Posts: 588
Thanked 29 Times in 26 Posts
Default

OK that is fine.
So did you managed to compile generic?

For custom kernel just change ident to something and save it with same filename (you probably know this)


Also you might want to
Code:
# cd /usr/src/sys/amd64/conf/
# make LINT
and check if....
you might find some useful info (options, without description)


Also show me your /etc/make.conf

Last edited by graudeejs; 2nd August 2008 at 10:14 AM.
Reply With Quote
  #9   (View Single Post)  
Old 2nd August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default

The kernel is still building (slow machine, 1 processor, 1 core).
Code:
$ cat /etc/make.conf
CFLAGS=-O2 -pipe
COPTFLAGS=-O2 -pipe
CPUTYPE?=athlon64

#buildworld stuff
NO_BLUETOOTH=true
NO_GAMES=true
NO_I4B=true
NO_PROFILE=true
# added by use.perl 2007-12-22 16:10:34
PERL_VER=5.8.8
PERL_VERSION=5.8.8
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.
Reply With Quote
Old 2nd August 2008
graudeejs's Avatar
graudeejs graudeejs is offline
Real Name: Aldis Berjoza
formerly killasmurf86
 
Join Date: Jul 2008
Location: Riga, Latvia
Posts: 588
Thanked 29 Times in 26 Posts
Default

Comment out

CFLAGS=-O2 -pipe
COPTFLAGS=-O2 -pipe

They will break things...
there are more of them by default then you typed.
No need to reenter default values

this might actually solve the problem
Reply With Quote
Old 2nd August 2008
Carpetsmoker's Avatar
Carpetsmoker Carpetsmoker is offline
Real Name: Martin
Old man from scene 24
 
Join Date: Apr 2008
Location: Eindhoven, Netherlands
Posts: 2,088
Thanked 198 Times in 156 Posts
Default

It would seem that this is harmless:
http://lists.freebsd.org/pipermail/c...er/142330.html

Assuming you don't need debug symbols, you can remove ``makeoptions DEBUG=-g'', which would make the warnings go away (And speed up builds a bit too).

Quote:
Originally Posted by Weaseal View Post
This is an amd64 machine. I noticed that my old 6.x kernel had such a 'machine amd64' line but the GENERIC /usr/src/sys/amd64/conf/GENERIC had no such line so I figured it had been knocked out for 7.x. Are you sure that is valid for 7.x?
The ``machine xyz'' line is no longer needed in FreeBSD 7, using ``cpu xyz'' is enough.

Quote:
Comment out

CFLAGS=-O2 -pipe
COPTFLAGS=-O2 -pipe

They will break things...
No, this won't do any good, the default CFLAGS are ``-fno-strict-aliasing -O2 -pipe''

In addition, CFLAGS is not used for kernel builds anyway.
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
Reply With Quote
Old 3rd August 2008
phoenix's Avatar
phoenix phoenix is offline
Risen from the ashes
 
Join Date: May 2008
Posts: 699
Thanked 90 Times in 81 Posts
Default

Quote:
Originally Posted by killasmurf View Post
Dude you configured kernel wrong from start
wtf is this:
Code:
cpu             HAMMER
ident           GENERIC
No, no, no, no, no. If he does that, he will have a useless system. If you've never used a 64-bit install of FreeBSD, then don't give advice. Those are the correct lines for an amd64 system.
__________________
Freddie

Help for FreeBSD: Handbook, FAQ, man pages, mailing lists.
Reply With Quote
Old 3rd August 2008
phoenix's Avatar
phoenix phoenix is offline
Risen from the ashes
 
Join Date: May 2008
Posts: 699
Thanked 90 Times in 81 Posts
Default

Quote:
Originally Posted by Weaseal View Post
This is an amd64 machine. I noticed that my old 6.x kernel had such a 'machine amd64' line but the GENERIC /usr/src/sys/amd64/conf/GENERIC had no such line so I figured it had been knocked out for 7.x. Are you sure that is valid for 7.x?
All kernels pull in the DEFAULTS file. The machine type is set in that file, along with a few other things.
__________________
Freddie

Help for FreeBSD: Handbook, FAQ, man pages, mailing lists.
Reply With Quote
Old 3rd August 2008
phoenix's Avatar
phoenix phoenix is offline
Risen from the ashes
 
Join Date: May 2008
Posts: 699
Thanked 90 Times in 81 Posts
Default

Quote:
Originally Posted by Weaseal View Post
So I am attempting a source upgrade from FreeBSD 6.3 to FreeBSD 7.0-p3, and the world and kernel compiled fine, but when I ran make installkernel:
When doing upgrades across major versions, it's always a good idea to compile and install GENERIC. Get things installed and working, then compile a custom kernel.

Also, you can use KODIR=/boot/testkernel on the installkernel command to install the kernel to a separate directory. Then you can use the nextboot(8) command to test boot that kernel. If it doesn't work, a reboot will use the previously working kernel.

Quote:
My kernel config:
Code:
$ cat RELNKERN7

cpu             HAMMER
ident           GENERIC
The ident line has to match the name of the kernel config file.
__________________
Freddie

Help for FreeBSD: Handbook, FAQ, man pages, mailing lists.
Reply With Quote
Old 3rd August 2008
TerryP's Avatar
TerryP TerryP is offline
Arp Constable
 
Join Date: May 2008
Location: USofA
Posts: 1,547
Thanked 112 Times in 104 Posts
Default

"Hammer"m I believe was a code word or a project name used by AMD when developing the chips we nore would call 'amd64' based.



Like phoenix has said, it's usually a good idea to test with the GENERIC kernel and usually a bloody good idea to have a copy handy just in case! You can always use make.conf(5) to control what kernels are built and installed by default,

Code:
KERNCONF=VIPER GENERIC

Will build me my custom kernel"VIPER" and the FreeBSD generic kernel during a buildkernel, then I can override KERNCONF to install the right kernel when the time comes. The first in the list is the default to be installed if you don't override KERNCONF when calling make.
__________________
My Journal

Thou shalt check the array bounds of all strings (indeed, all arrays), for surely where thou typest ``foo'' someone someday shall type ``supercalifragilisticexpialidocious''.
Reply With Quote
Old 3rd August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default

make installworld for a GENERIC kernel, after being built with an empty make.conf (aside from CPUTYPE?=athlon64) results in the exact same errors.

Any other suggestions?
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.
Reply With Quote
Old 4th August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default

Quote:
Originally Posted by phoenix View Post
When doing upgrades across major versions, it's always a good idea to compile and install GENERIC. Get things installed and working, then compile a custom kernel.

Also, you can use KODIR=/boot/testkernel on the installkernel command to install the kernel to a separate directory. Then you can use the nextboot(8) command to test boot that kernel. If it doesn't work, a reboot will use the previously working kernel.
Sweet! Thanks phoenix. I tried nextboot with the GENERIC 7 kernel that spit out all the errors and all seems well.
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.

Last edited by Weaseal; 4th August 2008 at 10:09 AM.
Reply With Quote
Old 4th August 2008
Weaseal's Avatar
Weaseal Weaseal is offline
Package Pilot
 
Join Date: May 2008
Location: East Coast, US
Posts: 177
Thanked 7 Times in 7 Posts
Default

Update: While running the GENERIC 7 kernel, I was able to install the custom 7 kernel without the errors appearing.
__________________
FreeBSD addict since 4.2-RELEASE.
My FreeBSD wiki.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
kernel version 0?? Stellar OpenBSD General 5 30th August 2009 11:07 PM
kernel modules Mr-Biscuit FreeBSD General 0 2nd March 2009 06:18 AM
kernel not found isamu FreeBSD Installation and Upgrading 13 24th October 2008 12:24 AM
Linux Kernel map TerryP Other BSD and UNIX/UNIX-like 2 1st July 2008 05:33 AM
Kernel CPU type for Via C3 CPU Malakim FreeBSD General 2 27th May 2008 10:10 AM


All times are GMT. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick