DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 11th August 2008
IIMarckus IIMarckus is offline
Port Guard
 
Join Date: Aug 2008
Posts: 13
Thanked 0 Times in 0 Posts
Default Cannot mount (NTFS)

Hi,

I have a Windows HD and have been trying to mount it in OpenBSD.
Code:
# mount /dev/wd0i /mnt/winhdd
mount_ntfs: /dev/wd0i on /mnt/winhdd: Operation not supported
# mount -r /dev/wd0i /mnt/winhdd
mount_ntfs: /dev/wd0i on /mnt/winhdd: Operation not supported
I'm new to Unixes in general, so I'm not sure what I'm doing wrong. Here's my fstab:
Code:
/dev/wd1a / ffs rw 1 1
/dev/wd1g /home ffs rw,nodev,nosuid 1 2
/dev/wd1d /tmp ffs rw,nodev,nosuid 1 2
/dev/wd1f /usr ffs rw,nodev 1 2
/dev/wd1e /var ffs rw,nodev,nosuid 1 2
I tried adding this line to fstab:
Code:
/dev/wd0i /mnt/winhdd ntfs r 1 2
However, I still cannot mount the disk and on boot I receive several instances of this: "fstab: /etc/fstab: Inappropriate file type or format"

Here's some information that may or may not be helpful (I can't tell what's what, to be honest). disklabel:
Code:
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: IBM-DHEA-36480  
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 790
total sectors: 12692736
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# microseconds
track-to-track seek: 0	# microseconds
drivedata: 0 

16 partitions:
#                size           offset  fstype [fsize bsize  cpg]
  c:         12692736                0  unused      0     0      
  i:         12675222               63    NTFS
fdisk:
Code:
Disk: wd0	geometry: 790/255/63 [12692736 Sectors]
Offset: 0	Signature: 0xAA55
            Starting         Ending         LBA Info:
 #: id      C   H   S -      C   H   S [       start:        size ]
-------------------------------------------------------------------------------
*0: 07      0   1   1 -    788 254  63 [          63:    12675222 ] HPFS/QNX/AUX
 1: 00      0   0   0 -      0   0   0 [           0:           0 ] unused      
 2: 00      0   0   0 -      0   0   0 [           0:           0 ] unused      
 3: 00      0   0   0 -      0   0   0 [           0:           0 ] unused
dmesg:
Code:
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 501 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 393768960 (375MB)
avail mem = 372424704 (355MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/99, BIOS32 rev. 0 @ 0xfb470, SMBIOS rev. 2.1 @ 0xf0800 (12 entries)
bios0: vendor Award Software version "4.51 PG" date 09/14/99
bios0: Compaq Compaq PC
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb90c
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11 12
pcibios0: PCI Interrupt Router at 000:01:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 530 PCI" rev 0x03
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
pciide0 at pci0 dev 0 function 1 "SiS 5513 EIDE" rev 0xd0: 530: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DHEA-36480>
wd0: 16-sector PIO, LBA, 6197MB, 12692736 sectors
wd1 at pciide0 channel 0 drive 1: <QUANTUM FIREBALL CX10.0A>
wd1: 16-sector PIO, LBA, 9541MB, 19541088 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-W512EB, 2.0K> SCSI0 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <LG, CD-RW CED-8042B, 1.07> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2
pcib0 at pci0 dev 1 function 0 "SiS 85C503 System" rev 0xb1
"SiS 5595 System" rev 0x00 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 1 function 2 "SiS 5597/5598 USB" rev 0x11: irq 3, version 1.0, legacy support
ppb0 at pci0 dev 2 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 530 VGA" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci1 at pci0 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11, version 1.0, legacy support
ohci2 at pci0 dev 11 function 1 "Acer Labs M5237 USB" rev 0x03: irq 10, version 1.0, legacy support
ohci3 at pci0 dev 11 function 2 "Acer Labs M5237 USB" rev 0x03: irq 12, version 1.0, legacy support
ehci0 at pci0 dev 11 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
dc0 at pci0 dev 13 function 0 "Davicom DM9102" rev 0x40: irq 11, address 00:08:a1:8c:91:04
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 1
eso0 at pci0 dev 15 function 0 "ESS SOLO-1 AudioDrive" rev 0x01: ES1946, irq 10
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
mpu at eso0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: LM78
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
eso0: mapping Audio 1 DMA using I/O space at 0x410
biomask ff6d netmask ff6d ttymask ffef
mtrr: K6-family MTRR support (2 registers)
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler U3" rev 2.00/2.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler U3, 6.16> SCSI0 0/direct removable
sd0: 978MB, 124 cyl, 255 head, 63 sec, 512 bytes/sec, 2004991 sec total
Reply With Quote
  #2   (View Single Post)  
Old 11th August 2008
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,888
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by IIMarckus View Post
I have a Windows HD and have been trying to mount it in OpenBSD.
Your dmesg(8) output shows that you are using the default 4.3 kernel. By default, OpenBSD does not provide NTFS support, but does offer a driver which provides NTFS support on an experimental basis. This however will require enabling the option in /usr/src/sys/arch/i386/conf/GENERIC, & recompilation of the kernel. For more information, see Section 14.16 of the FAQ:

http://openbsd.org/faq/faq14.html#foreignfs

Last edited by ocicat; 11th August 2008 at 08:18 PM.
Reply With Quote
  #3   (View Single Post)  
Old 11th August 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

The fact that the mount_ntfs utility exists in base confuses people, but as ocicat said, you still need to recompile the kernel with the NTFS option.

It's considered experimental though.. it's definitely not being actively worked on(In tree.. anyway.), most recent commits were removal of obsolete NetBSD clauses and RCSID macro fluff.
Reply With Quote
  #4   (View Single Post)  
Old 11th August 2008
IIMarckus IIMarckus is offline
Port Guard
 
Join Date: Aug 2008
Posts: 13
Thanked 0 Times in 0 Posts
Default

Recompiling a kernel is definitely beyond my capabilities, at least for the moment. Thank for letting me know; I'll just live without NTFS support (it's not like there's anything important on that drive I can't get to through Windows).

Last edited by IIMarckus; 11th August 2008 at 08:37 PM.
Reply With Quote
  #5   (View Single Post)  
Old 11th August 2008
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,888
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by IIMarckus View Post
Recompiling a kernel is definitely beyond my capabilities, at least for the moment.
The FAQ covers building the kernel in quite some detail in Section 5.3:

http://openbsd.org/faq/faq5.html#Bld

If whenever you decide to tackle compilation, you can post questions here. Even if you don't attempt recompilation, you can post other OpenBSD questions here too.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NTFS on DragonFly BSD Malakim Other BSD and UNIX/UNIX-like 4 17th October 2008 03:43 PM
Mounting ntfs drive as rw using fusefs-ntfs caesius FreeBSD General 3 12th October 2008 11:08 AM
fdisk can't see (Vista) ntfs partitions caesius FreeBSD General 7 23rd September 2008 01:01 AM
fusefs-ntfs problem... daemonFromHeaven FreeBSD Ports and Packages 4 12th September 2008 10:15 AM
mount problems with ntfs drive shinjii FreeBSD General 3 25th June 2008 12:33 AM


All times are GMT. The time now is 10:56 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick