vr0: rx packet lost
On an old machine I used as a workstation for years with Gentoo, I decided to turn it into a FreeBSD server for testing purposes.
The problem is that the integraded VIA Rhine seems to have problems. Transfering data to it is really slow, as I would be in a 10Mb network, but it is 100Mb.
I it interesting that inserting a Realtek nic (rl) it does work WORST like 50Kb/s but dmesg does NOT output anything strange.
If I take the hard drive and run it from other machine it simply works... but with realtek, not with via, because that machine doesn't have.
I googled a little but nothing clear.
So OK.. I don't know what to do, maybe this motherboard is dead and I should let it die peacefully
Here is some info:
$ ifconfig vr0 vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:10:dc:c8:82:3b inet 172.26.0.2 netmask 0xffffff00 broadcast 172.26.0.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active
Regards and thankyou
|Thread||Thread Starter||Forum||Replies||Last Post|
|ext2 lost+found||gosha||General Hardware||0||21st June 2009 01:32 PM|
|sshguard and packet filter||sputnik||OpenBSD Security||0||18th April 2009 02:11 PM|
|Packet Sniffer for OpenBSD.||bsdnewbie999||OpenBSD General||6||26th October 2008 02:28 AM|
|packet filter configuration.||bsdnewbie999||OpenBSD General||1||23rd October 2008 08:54 AM|
|Lost posts||graudeejs||Feedback and Suggestions||5||3rd August 2008 02:59 PM|