can not wake on lan afer shutdown -p (may be acpi related)
Recently I posted a mail to freebsd-stable list about my problem, but still no response. I'll post my problem here too:
"I have a shutdown problem. I have a machine with gigabyte GA-G33M-DS2R motherboard. Integrated network card is Realtek 8111B. I can not wake the computer after I shutdown it from FreeBSD.
It is a dualboot system - windows xp and freebsd. If I shutdown the computer from windows - later I can wake it up with magic packet. Even if I shutdown the machine on the boot menu with the power button - than later I can wake on lan. The only situation where I CANNOT wake it is when I shutdown the machine from freebsd (halt -p).
First I tested with 7.0-RELEASE-p5 amd64 (RELENG_7_0) and than I upgraded to 7.1 PRERELASE amd64 (RELENG_7). I also tested with two network cards - the integrated one Realtek 8111B and another one Intel PRO1000PT PCI-E with WOL enabled.
With both nics and both freebsd versions the situation is the same - after shutdown from bsd the computer is not able to wake on lan. The indication on the switch port says that after shut down there is active link.
Here is some information after last update:
[root at backup ~]# uname -a FreeBSD backup.pulsar.bg 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #1: Mon Oct 6 17:01:26 EEST 2008 root at backup.pulsar.bg:/usr/obj/usr/src/sys/MYCONF amd64 [root at backup ~]# pciconf -lv ... re0 at pci0:3:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet ... em0 at pci0:1:0:0: class=0x020000 card=0x10838086 chip=0x10b98086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '82572EI PRO/1000 PT Desktop Adapter (Copper)' class = network subclass = ethernet ... [root at backup ~]# ifconfig re0 wol [root at backup ~]# ifconfig em0 wol [root at backup ~]# ifconfig em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether 00:1b:21:22:52:cd media: Ethernet autoselect status: no carrier re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> ether 00:1f:d0:24:19:e9 inet 220.127.116.11 netmask 0xfffffff0 broadcast 18.104.22.168 inet 192.168.0.6 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 inet 127.0.0.1 netmask 0xff000000
10x in advance
I hope that someone here can help me. This machine should be running 24/7. The reason I need wake on lan is because I have ups in my network, and I use wake on lan to wake up machines in case of shutdown.
Last edited by edhunter; 9th October 2008 at 06:04 PM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|shutdown message||Mr-Biscuit||FreeBSD General||1||16th November 2008 11:59 PM|
|enable shutdown/reboot xfce4||rex||FreeBSD General||16||17th October 2008 02:19 PM|
|Yahoo! related Pidgin problems...||BSDfan666||General software and network||10||28th September 2008 02:39 AM|
|Shutdown problems||radtek||FreeBSD General||11||13th September 2008 12:42 AM|
|OpenBSD-related websites||bienc||OpenBSD General||7||12th May 2008 09:15 PM|