DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD General

FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 1st May 2008
edhunter's Avatar
edhunter edhunter is offline
Real Name: Georgi Iovchev
Port Guard
 
Join Date: May 2008
Location: Sofia, Bulgaria
Posts: 41
Thanked 0 Times in 0 Posts
Question driver for intel HECI controller?

Recreated the thread here too... as drhowarddrfine adviced me
http://www.bsdforums.org/forums/showthread.php?p=298700

Hello guys

Intel G33 mobo (Intel DG33FB)
with FreeBSD 7 amd64 (7.0-RELEASE-p1)

one thing is missing
here it is.

Code:
[root@asterisk ~]# pciconf -lv | grep -A3 none
none0@pci0:0:3:0:       class=0x078000 card=0x50448086 chip=0x29c48086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) HECI Controller'
    class      = simple comms
is there a driver (or kernel module) for that?
Reply With Quote
  #2   (View Single Post)  
Old 2nd May 2008
Carpetsmoker's Avatar
Carpetsmoker Carpetsmoker is offline
Real Name: Martin
Old man from scene 24
 
Join Date: Apr 2008
Location: Eindhoven, Netherlands
Posts: 2,088
Thanked 198 Times in 156 Posts
Default

The NIC is a Intel 82566DC

This should be the em(4) driver, All adapters up to the 82575 should be supported in the em driver.

The em driver should be in the GENERIC kernel, do you have a network interface? Can you post the output of dmesg?
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
Reply With Quote
  #3   (View Single Post)  
Old 2nd May 2008
edhunter's Avatar
edhunter edhunter is offline
Real Name: Georgi Iovchev
Port Guard
 
Join Date: May 2008
Location: Sofia, Bulgaria
Posts: 41
Thanked 0 Times in 0 Posts
Default

here is the last boot output from dmesg -a
Code:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE-p1 #2: Thu May  1 12:56:37 EEST 2008
    root@asterisk.pulsar.bg:/usr/obj/usr/src/sys/ASTERISK
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E4600  @ 2.40GHz (2419.29-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20000800<SYSCALL,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 2110636032 (2012 MB)
avail memory  = 2036899840 (1942 MB)
ACPI APIC Table: <INTEL  DG33FB  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DG33FB> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr c280c2806000c28
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr c280c2806000c28
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2430-0x2437 mem 0x88200000-0x8827ffff,0x80000000-0x87ffffff,0x88100000-0x881fffff irq 16 at device 2.0 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x2400-0x241f mem 0x88280000-0x8829ffff,0x882a4000-0x882a4fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: Ethernet address: 00:1c:c0:38:4f:72
em0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0x20e0-0x20ff irq 18 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x20c0-0x20df irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x20a0-0x20bf irq 17 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x882a5c00-0x882a5fff irq 17 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcm0: <Intel 82801I High Definition Audio Controller> mem 0x882a0000-0x882a3fff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <Marvell 88SX6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0x88000000-0x880001ff irq 17 at device 0.0 on pci2
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci3: <UHCI (generic) USB controller> port 0x2080-0x209f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x2060-0x207f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x882a5800-0x882a5bff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel AHCI controller> port 0x2428-0x242f,0x243c-0x243f,0x2420-0x2427,0x2438-0x243b,0x2020-0x203f mem 0x882a5000-0x882a57ff irq 21 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.20 controller with 6 ports detected
ata3: <ATA channel 0> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 2> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 3> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 4> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 5> on atapci1
ata8: [ITHREAD]
ichsmb0: <SMBus controller> port 0x2000-0x201f mem 0x882a6000-0x882a60ff irq 18 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging disabled
ad6: 78533MB <ExcelStor Technology J8080S P21OAB3A> at ata3-master SATA300
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad6s1a
Loading configuration files.
kernel dumps on /dev/ad6s1b
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad6s1b as swap device
Starting file system checks:
/dev/ad6s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1a: clean, 214883 free (451 frags, 26804 blocks, 0.2% fragmentation)
/dev/ad6s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1e: clean, 593630 free (54 frags, 74197 blocks, 0.0% fragmentation)
/dev/ad6s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1f: clean, 32116350 free (51886 frags, 4008058 blocks, 0.2% fragmentation)
/dev/ad6s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1d: clean, 2495961 free (353 frags, 311951 blocks, 0.0% fragmentation)
Setting hostuuid: 3a5b97c2-f5c3-11dc-addf-0013d4e33164.
Setting hostid: 0xcf5c4f08.
Mounting local file systems:
.
Setting hostname: asterisk.pulsar.bg.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	inet 127.0.0.1 netmask 0xff000000 
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
	ether 00:1c:c0:38:4f:72
	inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255
	inet 212.72.201.51 netmask 0xfffffff0 broadcast 212.72.201.63
	media: Ethernet autoselect
	status: no carrier
add net default: gateway 192.168.0.2
Additional routing options:
.
Starting devd.
hw.acpi.cpu.cx_lowest: 
C1
 -> 
C1

Additional IP options:
.
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
32-bit compatibility ldconfig path: /usr/lib32
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/ad6s1b...
savecore: no dumps found
Initial amd64 initialization:
.
Additional ABI support:
.
Setting date via ntp.
em0: link state changed to UP
 1 May 13:15:00 ntpdate[421]: step time server 192.168.0.2 offset 0.272118 sec
Clearing /tmp (X related).
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Configuring syscons:
 keymap
 blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
.
Starting inetd.
Starting background file system checks in 60 seconds.

Thu May  1 13:15:01 EEST 2008
May  1 13:18:06 asterisk su: ed to root on /dev/ttyp0
i have em0 here, and it is for my nic

here is the output from pciconf -lv
Code:
hostb0@pci0:0:0:0:      class=0x060000 card=0x50448086 chip=0x29c08086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Processor to I/O Controller'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:     class=0x030000 card=0x50448086 chip=0x29c28086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Integrated Graphics Controller'
    class      = display
    subclass   = VGA
none0@pci0:0:3:0:       class=0x078000 card=0x50448086 chip=0x29c48086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) HECI Controller'
    class      = simple comms
em0@pci0:0:25:0:        class=0x020000 card=0x00018086 chip=0x294c8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) Gigabit Ethernet Controller'
    class      = network
    subclass   = ethernet
uhci0@pci0:0:26:0:      class=0x0c0300 card=0x50448086 chip=0x29378086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:26:1:      class=0x0c0300 card=0x50448086 chip=0x29388086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:26:2:      class=0x0c0300 card=0x50448086 chip=0x29398086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:7:      class=0x0c0320 card=0x50448086 chip=0x293c8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcm0@pci0:0:27:0:       class=0x040300 card=0x00028086 chip=0x293e8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) HD Audio Controller'
    class      = multimedia
pcib1@pci0:0:28:0:      class=0x060400 card=0x29408086 chip=0x29408086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:      class=0x060400 card=0x29428086 chip=0x29428086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:2:      class=0x060400 card=0x29448086 chip=0x29448086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:3:      class=0x060400 card=0x29468086 chip=0x29468086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 4'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:28:4:      class=0x060400 card=0x29488086 chip=0x29488086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5'
    class      = bridge
    subclass   = PCI-PCI
uhci3@pci0:0:29:0:      class=0x0c0300 card=0x50448086 chip=0x29348086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci4@pci0:0:29:1:      class=0x0c0300 card=0x50448086 chip=0x29358086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci5@pci0:0:29:2:      class=0x0c0300 card=0x50448086 chip=0x29368086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
ehci1@pci0:0:29:7:      class=0x0c0320 card=0x50448086 chip=0x293a8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib6@pci0:0:30:0:      class=0x060401 card=0x50448086 chip=0x244e8086 rev=0x92 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:      class=0x060100 card=0x50448086 chip=0x29128086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IH (ICH9DH) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci1@pci0:0:31:2:    class=0x010601 card=0x50448086 chip=0x29228086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) 6 port SATA AHCI Controller'
    class      = mass storage
ichsmb0@pci0:0:31:3:    class=0x0c0500 card=0x50448086 chip=0x29308086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
atapci0@pci0:2:0:0:     class=0x01018f card=0x610111ab chip=0x610111ab rev=0xb2 hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = '6101 SATA2 Controller'
    class      = mass storage
    subclass   = ATA
none0 is not the NIC
i have em0 and my nic is working properly

Last edited by edhunter; 2nd May 2008 at 08:36 AM.
Reply With Quote
  #4   (View Single Post)  
Old 2nd May 2008
Carpetsmoker's Avatar
Carpetsmoker Carpetsmoker is offline
Real Name: Martin
Old man from scene 24
 
Join Date: Apr 2008
Location: Eindhoven, Netherlands
Posts: 2,088
Thanked 198 Times in 156 Posts
Default

Right, your NIC is working and you're looking only for the HECI driver.

No, AFAIK HECI is not supported on FreeBSDm either in the em or igb driver.
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Intel ATOM D945GCLF onboard LAN driver-card problem mona FreeBSD Installation and Upgrading 7 17th December 2008 04:50 PM
SATA controller sniper007 FreeBSD General 9 26th October 2008 06:00 PM
OpenBSD 4.4 and Intel DRM Nightweaver OpenBSD General 8 19th October 2008 07:34 PM
Intel 775 MB For 20$ revzalot OpenBSD General 2 22nd July 2008 06:17 AM
Intel 4965 Business_woman FreeBSD Installation and Upgrading 9 2nd July 2008 02:49 PM


All times are GMT. The time now is 02:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick