DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 31st January 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default 4.4 on macmini ppc xorg problem

I finally decided to upgrade, and unfortunately I have a big problem with xorg, actually with the ati driver.
Until version 4.3 there was a "iBooksHacks" option that worked pretty well. Now it has been changed into "MacModel". I've tried all the models written in the man page with no success.
The problem is: I can get into X, but then I cannot go back to console, the computer would freeze, the monitor would display "input not supported" and I can't even get in from a different machine, I can only cut the power.
I'v tried also without the "MacModel' option, and I can still get into X but no way back.

If anyone has any idea to solve the problem it would be great, otherwise I guess I''l be obliged to switch back to 4.3.

tks
Reply With Quote
  #2   (View Single Post)  
Old 1st February 2009
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

Perhaps you can try generating a new configuration file.. i.e: X -configure.

Can you post a dmesg in [code][/code] blocks, and perhaps post /var/log/Xorg.0.log.
Reply With Quote
  #3   (View Single Post)  
Old 1st February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

I did a new X -configure from the very beginning.

dmesg:
Code:
[ using 408000 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A]console in [keyboard] , using USB
using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.4 (GENERIC) #1854: Mon Aug 11 13:32:35 MDT 2008
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1033216000 (985MB)
mainbus0 at root: model PowerMac10,1
cpu0 at mainbus0: 7447A (Revision 0x102): 1249 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: uni-n
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9 irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x0, 0% charged
piic0 at adb0
iic1 at piic0
maxtmp0 at iic1 addr 0xc8: max6642
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <ST940110A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
atapiscsi0 at wdc1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACD> ATAPI 5/cdrom removable
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:5e:38:10
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
uhub6 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/5.07 addr 2
ulpt0 at uhub6 port 1 configuration 1 interface 0 "Canon S200SP" rev 1.10/1.03 addr 3
ulpt0: using bi-directional mode
uhub7 at uhub6 port 3 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev 1.10/4.10 addr 4
uhidev0 at uhub7 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
softraid0 at root
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
ulpt0 detached
wsmouse0 detached
ums0 detached
uhidev0 detached
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev1 detached
uhid0 detached
uhid1 detached
uhidev2 detached
uhub7 detached
uhub6 detached
uhub6 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/5.07 addr 2
ulpt0 at uhub6 port 1 configuration 1 interface 0 "Canon S200SP" rev 1.10/1.03 addr 3
ulpt0: using bi-directional mode
uhub7 at uhub6 port 3 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev 1.10/4.10 addr 4
uhidev0 at uhub7 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
Xorg.log:
Code:
(WW) OS did not count PCI devices, guessing wildly
(--) Using wscons driver

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.4 macppc 
Current Operating System: OpenBSD mini.my.domain 4.4 GENERIC#1854 macppc
Build Date: 06 August 2008  02:29:41PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb  1 08:25:36 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/OTF,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/.
(**) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/,
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
(**) RgbPath set to "/usr/X11R6/share/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Loader magic: 0x19c7248
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on openbsd
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0034 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,5962 card 1002,5962 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:16:0) ATI Technologies Inc RV280 [Radeon 9200] rev 1, Mem @ 0x98000000/27, 0x90000000/16, I/O @ 0x0400/8, BIOS @ 0x90020000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[1] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B](B)
	[2] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[3] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[1] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B](B)
	[2] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[3] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[5] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B](B)
	[6] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 4.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
	ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
	ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
	ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
	ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
	ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 00:10:0
(--) Chipset ATI Radeon 9200 5962 (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[5] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B](B)
	[6] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[5] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B](B)
	[6] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[7] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[8] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[9] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[13] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[14] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x0000000090000000: size 64KB
(II) RADEON(0): PCI bus 0 card 16 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "MacModel" "mini"
(II) RADEON(0): VGAAccess option set to FALSE, VGA module load skipped
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9200 5962 (AGP)" (ChipID = 0x5962)
(--) RADEON(0): Linear framebuffer at 0x0000000098000000
(--) RADEON(0): BIOS at 0x90020000
(WW) RADEON(0): Video BIOS not detected in PCI space!
(WW) RADEON(0): Attempting to read Video BIOS from legacy ISA space!
(WW) No VGA Base=0xc0000
(II) RADEON(0): Attempting to read un-POSTed bios
(WW) RADEON(0): Video BIOS not detected in PCI space!
(WW) RADEON(0): Attempting to read Video BIOS from legacy ISA space!
(WW) No VGA Base=0xc0000
(WW) RADEON(0): Unrecognized BIOS signature, BIOS data will not be used
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=32768K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(WW) RADEON(0): Video BIOS not detected, using default clock settings!
(II) RADEON(0): Probed PLL values: xtal: 27.000000 Mhz, sclk: 249.750000 Mhz, mclk: 190.125000 Mhz
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12500 max=35000; xclk=10514
(II) RADEON(0): Output DVI-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- External
 DDC Type  -- 0x6c
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- STV
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- 0x0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 1
(EE) RADEON(0): No connected devices found!
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(EE) RADEON(0): Using VGA default
in RADEONProbeOutputModes
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output DVI-0 using initial mode 1024x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): Cannot access BIOS or it is not valid.
		If your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort, 
		RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x90000000 - 0x9000ffff (0x10000) MX[B]
	[1] 0	0	0x98000000 - 0x9fffffff (0x8000000) MX[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[7] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B](B)
	[8] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[9] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[10] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[11] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[12] 0	0	0x00000400 - 0x000004ff (0x100) IX[B]
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[16] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[17] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x9bff9800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Memory manager initialized to (0,0) (1280,6553)
(II) RADEON(0): Reserved area from (0,1200) to (1280,1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 5351
init memmap
init common
init crtc1
init pll1
freq: 75000000
best_freq: 75000000
best_feedback_div: 50
best_ref_div: 6
best_post_div: 3
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x9bff9800 0x9fff9800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
(==) RADEON(0): Backing store disabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		30 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1205)
(II) RADEON(0): Largest offscreen area available: 1280 x 5344
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/X11R6/lib/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "wsmouse"
(**) Mouse0: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(--) Keyboard0: using wscons layout us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Reply With Quote
  #4   (View Single Post)  
Old 1st February 2009
Oko's Avatar
Oko Oko is offline
Fsck Surgeon
 
Join Date: May 2008
Location: Kosovo, Serbia
Posts: 733
Thanked 36 Times in 32 Posts
Default

Quote:
Originally Posted by BSDfan666 View Post
Perhaps you can try generating a new configuration file.. i.e: X -configure.

Can you post a dmesg in [code][/code] blocks, and perhaps post /var/log/Xorg.0.log.
I have never used OpenBSD on Apple hardware nor I am planing to do that in the future but I have a few questions.

Is MAC mini PPC or i386? Secondly, I am little bit surprised to see that you advice him to run X -configure? On sparc64 let say you configure X by starting with xorg.conf file provided in /usr/X11R6/README and editing it. Are you suggesting that MAC hardware can be configured as i386 and
AMD64. What about advice to keep OS X on the small portion of the
HDD to help configuration and etc.

As I said, I have never used OpenBSD on MAC, I have never even read
carefully FAQ pages about X on MAC so I might be asking completely stupid things.
Reply With Quote
  #5   (View Single Post)  
Old 1st February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

It is PPC as stated in the thread title.
In the past, if I did not use X -configure, xorg would not get things right, especially, I have to specify the HorizSync and VertRefresh.
OpenBSD 4.3 worked just fine (and so did 4.2) with the "iBooksHacks".
When I bought this macmini in 2005 (one of the first, I guess) it was to switch "from" mswindows, but then I found out I like mac osx even worst. The good is, it pushed me to learn unix. So I don't want to waste disk space for something I will never use. And as I said, things were just fine in 4.3. Actually, at the time I tried different OS: freebsd, netbsd, slackware, fedora, but openbsd overall gives less problems (or none at all), For examplel, with freebsd and slackware the fan keeps running, whereas there are no such problems with openbsd, the install is also easier with openbsd.

But that is really all out of topic
Reply With Quote
  #6   (View Single Post)  
Old 2nd February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

I wrote an email to the Xorg developers, and I had this answer (I tried to reinstall 4.3 and it works fine with the "iBookHacks" option. I had this answer:

Code:
the ibookhacks option must be some openbsd
specific patch.  If you can point me to the patch I can look at
incorporating it into the upstream radeon driver.
anyone knows how to get it?

Also, I even tried to install 4.4 -current, but it does not even boot, it hangs while checking the hardware before getting to "boot>"
Reply With Quote
  #7   (View Single Post)  
Old 2nd February 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

Quote:
anyone knows how to get it?
The entire history of OpenBSD source-code is publicly available via CVS repository, including comments for every change by the developers. If you know how you configured it in your xorg.conf file when you were running 4.3, what it did and why it was removed can be found in the xenocara CVS repository.
Reply With Quote
  #8   (View Single Post)  
Old 2nd February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

well, I had a look at the repository, but I'm a bit lost, I've been clicking around a lot, but don't really know how to make a clever search. I guess I might wait until the next release and in the meantime reinstall 4.3
Reply With Quote
  #9   (View Single Post)  
Old 2nd February 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

Here's a cheat to find the appropriate log entries: Install CVSync, obtain a copy of the relatively small CVSROOT repository, then grep the Changelog* files looking for comments about the hack, which will lead you to the appropriate source.

I don't have access to my CVS repositories today, else I would just do this myself.

BTW, a search of the misc@ archives showed that the hack was in place at least as far back as 3.4 or 3.5. That would be in the XF4 repository, which has been retained for historical purposes such as these. Xenocara was put in place for the restructured Xorg 6.9, if I remember correctly.

---
Edit: nope, Xenocara was for X.Org 7

Last edited by jggimi; 2nd February 2009 at 03:32 PM.
Reply With Quote
Old 2nd February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

thank you I'll give it a try
Reply With Quote
Old 2nd February 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

While I don't have access to my CVS repositories, I do have access to my cvsync.conf file, which shows all the repositories I keep. If you wish to copy/paste/edit it, you'd only require the "openbsd-cvsroot" repository collection.
Code:
config {
    hostname anoncvs3.usa.openbsd.org
        compress
        collection {
        name openbsd-cvsroot release rcs
        prefix /cvs
        umask 002
        }
        collection {
        name openbsd-src release rcs
        prefix /cvs
        umask 002
        }
        collection {
        name openbsd-ports release rcs
        prefix /cvs
        umask 002
        }
        collection {
        name openbsd-xenocara release rcs
        prefix /cvs
        umask 002
        }
        collection {
        name openbsd-www release rcs
        prefix /cvs
        umask 002
        }
    }
Reply With Quote
Old 2nd February 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

Heh. A search of the cvs logs at the marc.info archive found this:

http://marc.info/?l=openbsd-cvs&m=108853893509324&w=2
Reply With Quote
Old 2nd February 2009
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

OpenBSD 4.3 came with xf86-video-ati 6.6.3, 4.4 comes with 6.9.0.

That's quite a big diff.. it could be something that changed there, or there could have been some kernel wscons/vgafb changes.

The fact that you're experncing problems on both 4.4 and -CURRENT is unfortunate, I notice that you have sent an email to the PPC list, but that list doesn't appear to be high volume.

Consider using sendbug(1) in 4.3, or 4.4 if you still have it installed.. otherwise, send an email to @bugs or @misc.

Sorry..
Reply With Quote
Old 2nd February 2009
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

That new driver has the MacModel option.. which appears to be the upstream solution. (iBookHacks was a local change)

So can you confirm Option MacModel "ibook" fails?

Also, can you post your xorg.conf file?
Reply With Quote
Old 2nd February 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

Lets see what the ibookhacks actually did.

According to this it was included in 3.6-release.

These hacks were included in the xenocara packaging. Here's the link to the log for the xenocara version of radeon.h, and here's the link to the log for the xenocara version of radeon_driver.c.

As BSDfan states, the update to 6.9.0 looks like it removed the hack.
Reply With Quote
Old 3rd February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Smile

I'm back
Thank you guys.
Actually I just wanted to ask you if it weren't better to tell this directly to the obsd developers. I've tried all the possible combinations of MacModel: "mini", "mini-internal", "mini-external" all give access to X with no way back (while in X all works fine); all "powerbooks" options give a black screen with no way out; "ibooks" gives a black screen but allows to go back to console.
Now I have 4.4 instlled, with nothing in it, because I tried everything: fresh install of 4.4, re-installation of macos X to see if it was ofirmware related (a fresh installs resets everything), I reinstalled 4.3 and found out the old "iBookHacks" words fine. Reinstalled 4.4 and double-checked all the "mini" options, nothing works.
Here is the xorg.conf (this time with "mini" option):
Code:
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/share/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/OTF"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "dbe"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync 30-60
	VertRefresH 55-75
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        Option     "MacModel" "mini"          	# <str>
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV280 [Radeon 9200]"
	BusID       "PCI:0:16:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 24
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes "1024x768"
	EndSubSection
EndSection
Please advise me to what's best to do, send the "iBookHacks" to the Xorg guy or sendbug to Obsd, or both? And what exactly shoud I send?
Thanks a lot for all the help
Reply With Quote
Old 3rd February 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

Quote:
Actually I just wanted to ask you if it weren't better to tell this directly to the obsd developers.
To do that, you file a report. Posting to misc@ can sometimes be helpful -- its a much bigger crowd, including some of the developers, but not all of them. misc@ is better if you want to know why or how. But for something like this, which appears to be a bug, it's best to contact the developers with a bug report.

For instructions on how to file a bug report, including methods and required content, see http://openbsd.rt.fm/report.html
Reply With Quote
Old 3rd February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

ok
I've just sent an email to bugs.
Am I right if I reckon this will be fixed for the next release? In that case is it better for me to reinstall 4.3 and go back to normal work?
Reply With Quote
Old 3rd February 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

I saw your posting.

You asked for the hack patches -- they are in the logs I posted above. For xenocara, the hack is patch # 1.2 for radeon.h and patch # 1.3 for radeon_driver.c.
Reply With Quote
Old 3rd February 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

cool
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FreeBSD 7.1 Ati Xpress 200M Xorg 7.4 problem raduenea FreeBSD Installation and Upgrading 11 1st July 2009 12:46 AM
Xorg + Xfce4 resolution problem sniper007 FreeBSD General 4 30th April 2009 04:38 PM
macmini audio gosha OpenBSD General 15 14th January 2009 02:43 AM
Need to use full path to commands and xorg.config problem phreud FreeBSD General 4 17th November 2008 07:44 PM
Xorg very slow (problem with DRI?) Hihihi OpenBSD General 6 18th July 2008 06:21 PM


All times are GMT. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick