DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD General

FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
Old 18th January 2009
maxrussell maxrussell is offline
Package Pilot
 
Join Date: May 2008
Location: Montrose, Angus
Posts: 181
Thanked 1 Time in 1 Post
Default

Code:
max@/dev: ls
acd0            cuad0.lock      mem             sndstat         ttyv8
acd1            dcons           midistat        stderr          ttyv9
acpi            devctl          mixer0          stdin           ttyva
ad0             devstat         net             stdout          ttyvb
ad0s1           dgdb            net1            sysmouse        ttyvc
ad0s1a          dsp0.0          net2            ttyd0           ttyvd
ad0s1b          dumpdev         net3            ttyd0.init      ttyve
ad0s1c          fd              network         ttyd0.lock      ttyvf
ad0s1d          fido            nfs4            ttyp0           ugen0
ad0s1e          geom.ctl        nfslock         ttyp1           ugen0.1
ad0s1f          io              null            ttyp2           ums0
ata             kbd0            nvidia0         ttyp3           urandom
atkbd0          kbd1            nvidiactl       ttyv0           usb
audit           kbdmux0         pci             ttyv1           usb0
bpf0            klog            ppi0            ttyv2           usb1
console         kmem            ptyp0           ttyv3           xpt0
consolectl      log             ptyp1           ttyv4           zero
ctty            lpt0            ptyp2           ttyv5
cuad0           lpt0.ctl        ptyp3           ttyv6
cuad0.init      mdctl           random          ttyv7
max@/dev: ls
acd0            cuad0.lock      mem             sndstat         ttyv8
acd1            dcons           midistat        stderr          ttyv9
acpi            devctl          mixer0          stdin           ttyva
ad0             devstat         net             stdout          ttyvb
ad0s1           dgdb            net1            sysmouse        ttyvc
ad0s1a          dsp0.0          net2            ttyd0           ttyvd
ad0s1b          dumpdev         net3            ttyd0.init      ttyve
ad0s1c          fd              network         ttyd0.lock      ttyvf
ad0s1d          fido            nfs4            ttyp0           ugen0
ad0s1e          geom.ctl        nfslock         ttyp1           ugen0.1
ad0s1f          io              null            ttyp2           ums0
ata             kbd0            nvidia0         ttyp3           urandom
atkbd0          kbd1            nvidiactl       ttyv0           usb
audit           kbdmux0         pci             ttyv1           usb0
bpf0            klog            ppi0            ttyv2           usb1
console         kmem            ptyp0           ttyv3           xpt0
consolectl      log             ptyp1           ttyv4           zero
ctty            lpt0            ptyp2           ttyv5
cuad0           lpt0.ctl        ptyp3           ttyv6
cuad0.init      mdctl           random          ttyv7
max@/dev: ls
acd0            cuad0.lock      mem             sndstat         ttyv8
acd1            dcons           midistat        stderr          ttyv9
acpi            devctl          mixer0          stdin           ttyva
ad0             devstat         net             stdout          ttyvb
ad0s1           dgdb            net1            sysmouse        ttyvc
ad0s1a          dsp0.0          net2            ttyd0           ttyvd
ad0s1b          dumpdev         net3            ttyd0.init      ttyve
ad0s1c          fd              network         ttyd0.lock      ttyvf
ad0s1d          fido            nfs4            ttyp0           ugen0
ad0s1e          geom.ctl        nfslock         ttyp1           ugen0.1
ad0s1f          io              null            ttyp2           ums0
ata             kbd0            nvidia0         ttyp3           urandom
atkbd0          kbd1            nvidiactl       ttyv0           usb
audit           kbdmux0         pci             ttyv1           usb0
bpf0            klog            ppi0            ttyv2           usb1
console         kmem            ptyp0           ttyv3           xpt0
consolectl      log             ptyp1           ttyv4           zero
ctty            lpt0            ptyp2           ttyv5
cuad0           lpt0.ctl        ptyp3           ttyv6
cuad0.init      mdctl           random          ttyv7
max@/dev: ls
acd0            cuad0.lock      mem             sndstat         ttyv8
acd1            dcons           midistat        stderr          ttyv9
acpi            devctl          mixer0          stdin           ttyva
ad0             devstat         net             stdout          ttyvb
ad0s1           dgdb            net1            sysmouse        ttyvc
ad0s1a          dsp0.0          net2            ttyd0           ttyvd
ad0s1b          dumpdev         net3            ttyd0.init      ttyve
ad0s1c          fd              network         ttyd0.lock      ttyvf
ad0s1d          fido            nfs4            ttyp0           ugen0
ad0s1e          geom.ctl        nfslock         ttyp1           ugen0.1
ad0s1f          io              null            ttyp2           ums0
ata             kbd0            nvidia0         ttyp3           urandom
atkbd0          kbd1            nvidiactl       ttyv0           usb
audit           kbdmux0         pci             ttyv1           usb0
bpf0            klog            ppi0            ttyv2           usb1
console         kmem            ptyp0           ttyv3           xpt0
consolectl      log             ptyp1           ttyv4           zero
ctty            lpt0            ptyp2           ttyv5
cuad0           lpt0.ctl        ptyp3           ttyv6
cuad0.init      mdctl           random          ttyv7
max@/dev: ls
acd0            cuad0.lock      mem             sndstat         ttyv8
acd1            dcons           midistat        stderr          ttyv9
acpi            devctl          mixer0          stdin           ttyva
ad0             devstat         net             stdout          ttyvb
ad0s1           dgdb            net1            sysmouse        ttyvc
ad0s1a          dsp0.0          net2            ttyd0           ttyvd
ad0s1b          dumpdev         net3            ttyd0.init      ttyve
ad0s1c          fd              network         ttyd0.lock      ttyvf
ad0s1d          fido            nfs4            ttyp0           ugen0
ad0s1e          geom.ctl        nfslock         ttyp1           ugen0.1
ad0s1f          io              null            ttyp2           ums0
ata             kbd0            nvidia0         ttyp3           urandom
atkbd0          kbd1            nvidiactl       ttyv0           usb
audit           kbdmux0         pci             ttyv1           usb0
bpf0            klog            ppi0            ttyv2           usb1
console         kmem            ptyp0           ttyv3           xpt0
consolectl      log             ptyp1           ttyv4           zero
ctty            lpt0            ptyp2           ttyv5
cuad0           lpt0.ctl        ptyp3           ttyv6
cuad0.init      mdctl           random          ttyv7
max@/dev: dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 3200+ (1803.78-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x19<LAHF,ExtAPIC,CR8>
real memory  = 3489333248 (3327 MB)
avail memory = 3401707520 (3244 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci2
nvidia0: <GeForce 8600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf9fbe000-0xf9fbefff irq 21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9fbfc00-0xf9fbfcff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0xd800-0xd807,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xd000-0xd00f mem 0xf9fbd000-0xf9fbdfff irq 23 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcm0: <NVidia MCP51 High Definition Audio Controller> mem 0xf9fb8000-0xf9fbbfff irq 20 at device 16.1 on pci0
pcm0: [ITHREAD]
nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xcc00-0xcc07 mem 0xf9fbc000-0xf9fbcfff irq 21 at device 20.0 on pci0
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nfe0: Ethernet address: 00:13:8f:a5:1f:bf
nfe0: [FILTER]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <vendor 0x046d product 0x0920, class 255/255, rev 1.10/0.01, addr 2> on uhub0
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 3> on uhub0
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1803776989 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad0: 152627MB <Maxtor 6G160P0 KA201V00> at ata0-master UDMA133
acd0: DVDR <PIONEER DVD-RW DVR-111D/1.19> at ata1-master UDMA66
acd1: DMA limited to UDMA33, device found non-ATA66 cable
acd1: DVDROM <ASUS DVD-E616A2/1.03> at ata1-slave UDMA33
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20071129_0050>
Trying to mount root from ufs:/dev/ad0s1a
linux: pid 1017 (opera): ioctl fd=499, cmd=0x8910 ('\M^I',16) is not implemented
Reply With Quote
Old 18th January 2009
Carpetsmoker's Avatar
Carpetsmoker Carpetsmoker is offline
Real Name: Martin
Old man from scene 24
 
Join Date: Apr 2008
Location: Eindhoven, Netherlands
Posts: 2,068
Thanked 198 Times in 156 Posts
Default

So there is nothing in dmesg if you plug in in your USB drive?

Does the drive has a light or something to show that it is connected? At least *something* should show up in dmesg. Try a different port if possible. Or test the post with another device (Your USB mouse for example).
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
Reply With Quote
Old 18th January 2009
maxrussell maxrussell is offline
Package Pilot
 
Join Date: May 2008
Location: Montrose, Angus
Posts: 181
Thanked 1 Time in 1 Post
Default

Yes, the USB drive has a small white light on it to indicate (I suppose) it has power.

I've checked the drive on a Vista laptop and an XP machine at work.

I've used two different USB pen/thumb drives in the same port and they are fine, and I then mount them from da0s1 to /mnt/flash
Reply With Quote
Old 18th January 2009
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,147
Thanked 182 Times in 149 Posts
Default

When you formatted the USB stick with NTFS it was recognized. That is why I suggest to do this again. Then with FreeBSD's fdisk you change the partition type from NTFS to FAT32

Fdisk output concerning one of my USB sticks
Code:
#  fdisk da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=244 heads=255 sectors/track=63 (16065 blks/cyl)

parameters to be used for BIOS calculations are:
cylinders=244 heads=255 sectors/track=63 (16065 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 6 (0x06),(Primary 'big' DOS (>= 32MB))
    start 32, size 3932128 (1919 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 960/ head 128/ sector 32
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
My stick already has partition identifier 6, which stands for the MSDOS filesystem. Yours probably will have a '7' for NTFS as ID.
So the task is simple, change this ID from 7 to 6 .

In the following I will change the partition ID 6 of my stick to OpenBSD's ID 166.
Code:
# fdisk -u da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=244 heads=255 sectors/track=63 (16065 blks/cyl)

parameters to be used for BIOS calculations are:
cylinders=244 heads=255 sectors/track=63 (16065 blks/cyl)

Do you want to change our idea of what BIOS thinks ? [n] enter
We accept FreeBSD's interpretation of the BIOS.

Code:
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 6 (0x06),(Primary 'big' DOS (>= 32MB))
    start 32, size 3932128 (1919 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 960/ head 128/ sector 32
Do you want to change it? [n] y enter
Yes, I want to change this entry.

Code:
Supply a decimal value for "sysid (165=FreeBSD)" [6] 166
Supply a decimal value for "start" [32] 63
Supply a decimal value for "size" [3932128] 
fdisk: WARNING: partition does not end on a cylinder boundary
fdisk: WARNING: this may confuse the BIOS or some operating systems
Correct this automatically? [n] y enter
I change the ID from 6 (FAT32) to 166 (OpenBSD) and allow fdisk to align the partition end on a cylinder boundary.

Code:
fdisk: WARNING: adjusting size of partition to 3919797
Explicitly specify beg/end address ? [n] 
sysid 166 (0xa6),(OpenBSD)
    start 63, size 3919797 (1913 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 243/ head 254/ sector 63
Are we happy with this entry? [n] y enter
Yes, we are happy

Code:
The data for partition 2 is:
<UNUSED>
Do you want to change it? [n] enter

The data for partition 3 is:
<UNUSED>
Do you want to change it? [n]  enter

The data for partition 4 is:
<UNUSED>
Do you want to change it? [n] enter

Partition 1 is marked active
Do you want to change the active partition? [n]  enter
The remaining empty partitions/slices we leave untouched. And partition/slice 1 can stay the active partition.

Code:
We haven't changed the partition table yet.  This is your last chance.
parameters extracted from in-core disklabel are:
cylinders=244 heads=255 sectors/track=63 (16065 blks/cyl)

parameters to be used for BIOS calculations are:
cylinders=244 heads=255 sectors/track=63 (16065 blks/cyl)

Information from DOS bootblock is:
1: sysid 166 (0xa6),(OpenBSD)
    start 63, size 3919797 (1913 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 243/ head 254/ sector 63
2: <UNUSED>
3: <UNUSED>
4: <UNUSED>
Should we write new partition table? [n] y enter
After entering "y" here the MBR gets updated and the stick will have been marked, having an OpenBSD partition. Of course, I still need to format this OpenBSD partition on an OpenBSD sytem with newfs.

So you task is the change the NTFS sysid to 06. When that is done you format that slice with FreeBSD's newfs_msdos.
Code:
# newfs_msdos /dev/da0s1
Problem solved, I hope
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
Old 19th January 2009
phoenix's Avatar
phoenix phoenix is offline
Risen from the ashes
 
Join Date: May 2008
Posts: 699
Thanked 90 Times in 81 Posts
Default

I've found with a lot of FAT-formatted USB drives, you have to manually run mount -t msdosfs /dev/da0 /mnt so that GEOM can "taste" the drive and figure out how it is formatted/partitioned. After that, devd should add the device nodes to /dev. Then you re-run the mount command using the correct slice (/dev/da0s1, for example).

In theory, trying to do it with the slice info first should accomplish the same task, but I've found it to be hit-and-miss.

However, that only works if the kernel correctly detects the USB device, and correctly sets up the umass drive, such that a da(4) device is configured.

It also depends on how you format the drive, and whether or not it has a correct MBR. If possible, try doing the fdisk and newfs from FreeBSD, instead of from Windows.
__________________
Freddie

Help for FreeBSD: Handbook, FAQ, man pages, mailing lists.
Reply With Quote
Old 24th January 2009
maxrussell maxrussell is offline
Package Pilot
 
Join Date: May 2008
Location: Montrose, Angus
Posts: 181
Thanked 1 Time in 1 Post
Default

Reformatted as NTFS, then plugged it back into my FreeBSD box. Not showing up under /dev at all now...
Reply With Quote
Old 24th January 2009
Carpetsmoker's Avatar
Carpetsmoker Carpetsmoker is offline
Real Name: Martin
Old man from scene 24
 
Join Date: Apr 2008
Location: Eindhoven, Netherlands
Posts: 2,068
Thanked 198 Times in 156 Posts
Default

To quote myself:

Quote:
Originally Posted by Carpetsmoker
It does not matter what filesystem is on the device, the device can be filled with complete random data, /dev/da0 should still be there.
You can recompile world with USB_DEBUG and see if that provides any useful information.
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
Reply With Quote
Old 27th January 2009
maxrussell maxrussell is offline
Package Pilot
 
Join Date: May 2008
Location: Montrose, Angus
Posts: 181
Thanked 1 Time in 1 Post
Default

Okay, I'll look at doing that, but I'm confused (obviously).

Why should a device which as you say even if filled with random data, turn up under /dev/da0 not do so, if I know that a ) the device functions b ) the physical port functions.

This isn't an issue I've encountered with the machine in the past (in a previous, Ubuntu incarnation).
Reply With Quote
Old 13th February 2009
Carpetsmoker's Avatar
Carpetsmoker Carpetsmoker is offline
Real Name: Martin
Old man from scene 24
 
Join Date: Apr 2008
Location: Eindhoven, Netherlands
Posts: 2,068
Thanked 198 Times in 156 Posts
Default

A (new) WD Passport drive crossed my desk today, since I happend to have a FreeBSD machine running it was little trouble testing it.
It worked without problems for me, with different filesystems.
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
Reply With Quote
Old 14th February 2009
Beastie Beastie is offline
Daemonology student
 
Join Date: Jan 2009
Location: /dev/earth0
Posts: 270
Thanked 23 Times in 23 Posts
Default

Post moved here: http://daemonforums.org/showthread.php?t=2872
__________________
May the source be with you!

Last edited by Beastie; 16th February 2009 at 10:15 AM.
Reply With Quote
Old 14th February 2009
maxrussell maxrussell is offline
Package Pilot
 
Join Date: May 2008
Location: Montrose, Angus
Posts: 181
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by Carpetsmoker View Post
A (new) WD Passport drive crossed my desk today, since I happend to have a FreeBSD machine running it was little trouble testing it.
It worked without problems for me, with different filesystems.
Okay. So they can function. Not really of help to me currently, but I'll persevere.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to mount ext3 guitarscn FreeBSD General 2 26th August 2009 07:31 PM
ssh mount inquiry revzalot Solaris 1 18th March 2009 11:49 PM
mount ufs from linux kanonmat FreeBSD General 8 2nd December 2008 06:13 AM
NFS mount /usr/home? giddyupman FreeBSD General 1 1st September 2008 07:06 PM
Cannot mount (NTFS) IIMarckus OpenBSD General 4 11th August 2008 08:44 PM


All times are GMT. The time now is 11:53 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick