Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 16th July 2009
IronForge IronForge is offline
Fdisk Soldier
Join Date: Jul 2009
Location: SoCal - "have skills, will travel for projects"
Posts: 55
Default How to "configure" and mount a USB Drive already in use


I've been trying to mount a USB drive for a day or so; and though I've found the references, I can't seem to get past the "rsd0c is not Configured" error message.

The device/drive sd0 did show up on my dmesg yesterday; but I can't seem to find any "sd*" drive or any other USB designation emulating a SCSI drive on my dmesg output today.

I've been using my USB drives as go btwns on Linux and Windows; and would like to have them available for my OpenBSD Box. I've several files I'd rather keep on the USB and backed up on the Hard Drive.

Here's my dmesg:

# dmesg
OpenBSD 4.5-stable (GENERIC) #0: Sat Jul 11 10:11:35 PDT 2009
IronForge's Machine:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01 GHz
real mem = 2113433600 (2015MB)
avail mem = 2035261440 (1940MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/31/04, BIOS32 rev. 0 @ 0xfb490, SMBIOS rev. 2.2 @ 0xf0000 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 08/31/2004
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdef4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 5 9 10 11
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xd0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 964 ISA" rev 0x36
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 741: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HDS722540VLAT20>
wd0: 16-sector PIO, LBA48, 39266MB, 80418240 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6L100P0>
wd1: 16-sector PIO, LBA, 95611MB, 195813072 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DRU-530A, 1.0d> ATAPI 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8526B, 1.03> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 3, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 5, SiS7012 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 10, version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11, version 1.0, legacy support
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: irq 9, version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 11, address 00:11:5b:15:b4:c5
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
unknown vendor 0x2000 product 0x2800 (class communications subclass modem, rev 0x02) at pci0 dev 11 function 0 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8705F rev 3, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1
biomask ef4d netmask ef4d ttymask ffdf
mtrr: Pentium Pro MTRR support
uhub0: device problem, disabling port 4
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
kqemu: kqemu version 0x00010300 loaded, max locked mem=1031948kB
DDB symbols added: 337632 bytes
uhub0: device problem, disabling port 6
uhub0: device problem, disabling port 5

I appreciate the help.
Reply With Quote

mount, ms-dos, usb, windows

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Opera Port - conflicting pkgs in "make install" IronForge OpenBSD Packages and Ports 5 29th October 2009 05:10 AM
Fixed "xinit" after _7 _8, "how" here in case anyones' "X" breaks... using "nvidia" jb_daefo Guides 0 5th October 2009 09:31 PM
"Thanks" and "Edit Tags". diw Feedback and Suggestions 2 29th March 2009 12:06 AM
Scripted sysinstall fails with "Command 'system' failed" PeterSteele FreeBSD Installation and Upgrading 0 13th November 2008 11:31 PM
Took hardisk out and replaced to another machine: CAN"T Mount disappearedng FreeBSD General 2 17th June 2008 07:40 AM

All times are GMT. The time now is 03:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick