DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Packages and Ports

OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 28th August 2009
revzalot's Avatar
revzalot revzalot is offline
Shell Scout
 
Join Date: May 2008
Posts: 123
Thanked 1 Time in 1 Post
Default Courier IMAP/POP3 can't auth to mysql db

I'm in the process of installing a mailserver using postfix,courier,mysql, etc. I'm getting very close but I'm stuck when I try to test courier authentication to mysql. According to my maillog, authdaemond keeps appending a '.' to my login name 'vmail' and my database called 'mail'. I've made sure my

/etc/courier/authmysqlrc
Code:
MYSQL_SERVER            127.0.0.1
MYSQL_USERNAME          vmail
MYSQL_PASSWORD          vmail
MYSQL_PORT              3306    
MYSQL_OPT               0
MYSQL_DATABASE          mail    
MYSQL_USER_TABLE        users   
MYSQL_CRYPT_PWFIELD     password        
DEFAULT_DOMAIN                  examples.com 
MYSQL_UID_FIELD         uid
MYSQL_GID_FIELD         gid
MYSQL_LOGIN_FIELD       login   
MYSQL_HOME_FIELD        home
MYSQL_NAME_FIELD        name
MYSQL_MAILDIR_FIELD     maildir
MYSQL_QUOTA_FIELD       quota
Here's the error:
Code:
Aug 28 22:29:18 mail1 authdaemond: Installing libauthmysql
Aug 28 22:29:18 mail1 authdaemond: Installation complete: authmysql
Aug 28 22:29:19 mail1 postfix/postfix-script[7546]: starting the Postfix mail system
Aug 28 22:29:20 mail1 postfix/master[12482]: daemon started -- version 2.6-20090125, configuration /etc/postfix
Aug 28 22:31:19 mail1 authdaemond: failed to connect to mysql server (server=127.0.0.1, userid=vmail.): Access denied for user 'vmail.'@'localhost' (using password: YES)
Aug 28 22:38:16 mail1 authdaemond: authmysql: mysql_select_db(mail.) error: Incorrect database name 'mail.'
Reply With Quote
  #2   (View Single Post)  
Old 29th August 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,610
Thanked 214 Times in 189 Posts
Default

Disclaimer: I don't use postfix, courier, or mysql.

AFAIK, authdaemond is a component of mail/courier-authlib, which you didn't mention. And while I don't use any of these tools, Googling indicates you must properly configure /etc/courier/authdaemonrc. You didn't show a configuration for it, so I will assume this is the probable cause.

If you have not already installed the mysql FLAVOR of the package, uninstall the default flavor and install the mysql-enabled version, and then use the example provided in /usr/local/share/examples as a starting point.

Last edited by jggimi; 29th August 2009 at 02:49 AM.
Reply With Quote
  #3   (View Single Post)  
Old 29th August 2009
revzalot's Avatar
revzalot revzalot is offline
Shell Scout
 
Join Date: May 2008
Posts: 123
Thanked 1 Time in 1 Post
Default

After a reboot, it's working. I'm very close to finishing but looks like clamav needs upgrading:

Code:
# /usr/local/sbin/clamd
LibClamAV Warning: ***********************************************************
LibClamAV Warning: ***  This version of the ClamAV engine is outdated.     ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
LibClamAV Warning: ***********************************************************
LibClamAV Warning: ***  This version of the ClamAV engine is outdated.     ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
I've tried to do a make update via ports but no go. What should I do next?
Reply With Quote
  #4   (View Single Post)  
Old 29th August 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,610
Thanked 214 Times in 189 Posts
Default

There is no binary difference between a package and a port. The latter is merely built locally.

If you are running 4.5-release/4.5-stable, the version in the ports tree is ClamAV 0.94.2. If you cannot wait for 4.6, on October 1, which is synced with the newer ClamAV 0.95.2, you can move to -current, which has it.
Using a -current ports tree with a -release/-stable OS is unsupported. Before even attempting it, read FAQ 15.4.1. Then, read it again.
I recommend following the instructions in the warning you copied and pasted.
Reply With Quote
  #5   (View Single Post)  
Old 30th August 2009
revzalot's Avatar
revzalot revzalot is offline
Shell Scout
 
Join Date: May 2008
Posts: 123
Thanked 1 Time in 1 Post
Default

Thanks buddy. That fixed the problem. OBSD never ceases to amaze me.
Reply With Quote
  #6   (View Single Post)  
Old 6th September 2009
revzalot's Avatar
revzalot revzalot is offline
Shell Scout
 
Join Date: May 2008
Posts: 123
Thanked 1 Time in 1 Post
Default

Finally finished setting up my virtual mail/webserver and I'm happy on the outcome. Here's the hardware it's running - a low power consumption intel atom board:

Code:
OpenBSD 4.5-stable (GENERIC) #0: Thu Sep  3 23:03:18 PDT 2009
    root@mail.example.com:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
real mem  = 2135662592 (2036MB)
avail mem = 2056802304 (1961MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/27/08, SMBIOS rev. 2.4 @ 0xe3590 (23 entries)
bios0: vendor Intel Corp. version "LF94510J.86A.0038.2008.0427.2223" date 04/27/2008
bios0: Intel Corporation D945GCLF
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF!
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AC9M(S4) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus 2 (PEX2)
acpiprt5 at acpi0: bus 3 (PEX3)
acpiprt6 at acpi0: bus -1 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xae00! 0xcb000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int 22 (irq 9)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 (irq 255)
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), apic 2 int 16 (irq 11), address 00:1c:c0:5d:73:a6
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18 (irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 2 int 19 (irq 255)
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18 (irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 4
xl0 at pci4 dev 0 function 0 "3Com 3c905B 100Base-TX" rev 0x30: apic 2 int 21 (irq 10), address 00:10:5a:6d:a7:3e
exphy0 at xl0 phy 24: 3Com internal media interface
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <DVD-16X, DVD-ROM BDV316G, 0015> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200AAKS-00L9A0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <WDC WD3200AAKS-00L9A0>
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19 (irq 11)
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: 47m192
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Smtp Auth Help needed roundkat OpenBSD General 4 8th May 2009 08:25 PM
Problem with Postfix and Sasl auth unixbsd OpenBSD General 1 27th April 2009 03:26 AM
Courier IMAP Different MD5 version jrs665 OpenBSD Packages and Ports 3 30th October 2008 12:34 PM
fetchmail: POP3< -ERR internal server error graudeejs FreeBSD General 3 19th July 2008 02:02 PM
FAM keeps crashing with courier-imap krreagan FreeBSD General 0 14th May 2008 11:15 PM


All times are GMT. The time now is 06:28 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick