|
|
|||||||
| FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below. |
 |
|
|
Thread Tools | Display Modes |
14th December 2009
|
|||
|
|||
Q6600, 4GB, Geforce 9600GT, Asus P5Q-E, 2x WD RE3 500 GB (good disks, thanks to Carpetsmoker I picked these ones
 ).
|
|
28th March 2010
|
|||
|
|||
|
I7 920, Asus P6T, 6 gig Ram, GTX275 (dual head 19" Monitors), 320gig WD HD.
|
|
23rd July 2010
|
|||
|
|||
|
Here the specs of my FreeBSD hardware.
Laptop FreeBSD 8.0 amd64: CPU AMD Athlon 64 X2 TK-55 RAM 3 GB DDR2 Video nVidia GeForce 7000M Screen LCD 17" TFT WXGA 1440x900 1 OCZ SSD 30 GB 1 Seagate 160 GB Home Server FreeBSD 7.1 i386: HP Proliant DL380 G2 CPU 2x Intel Pentium III 1266MHz RAM 3 GB 2x 18 GB Ultra3 SCSI RAID 1 4x 36 GB Ultra3 SCSI RAID 5 Besides this I also have a Macbook (which I am on most of the time), Ubuntu desktop (for my wife), HP Proliant DL380 G3 with VMware ESXi (play around) and 2x Core i7 920 with 8 GB RAM both with FreeBSD 8.0 (not really mine but rented servers)
|
|
29th June 2011
|
||||
|
||||
|
So here is my FreeBSD media center.
Asus A8N, Athlon X2 4800+, Geforce 7200 I just login with ssh, start tmux, xinit, start a new shell, setenv DISPLAY, and use mplayer. Who needs xbmc?  Total costs: €0.  
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
|
|
29th June 2011
|
||||
|
||||
|
Is your case a towel?? That's bad a$$!
__________________
"The basic tool for the manipulation of reality is the manipulation of words. If you can control the meaning of words, you can control the people who must use the words." -Philip K. Dick
|
|
29th June 2011
|
|||
|
|||
|
At least he's prepared for the end of the world, just knock his media centre off it's foundation and run like hell.
|
|
29th June 2011
|
||||
|
||||
|
You should always know where your towel is, but keep backup towels around just in case.
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
|
|
30th June 2011
|
|||
|
|||
|
Quote:
 I'm still not sure what I will use it for, I just installed 8.2 and I will track stable. I have been away from BSD for a few years but came back since I have Sparc boxes now. Amazingly, NetBSD doesn't run on my servers but OpenBSD and FreeBSD do so I installed them both. Now, where did I put my earplugs?
__________________
BSDForums.org refugee #27  Multibooting with LILO
|
|
1st July 2011
|
||||
|
||||
|
Server
IBM 326m 2x2.2Ghz Opteron 275 16GB pc3200 ecc 2x1TB in raid1 FreeBSD 8-stable (Data server with 2 jails (web and mail) Thin Client hp 5730 cpu: 1ghz ram: 512 hd: 1G Debian squeeze (Want to use xdmcp to a jail in my server) Workstation Homebuilt 2.3Ghz q8200 (quad) 4gb cheap ddr2 500gb h/d debian squeeze more my g/fs than mine. P.S. This had take me ages to write because I kept trying to "dd" "y2y" and ":wq" damn vim.
|
|
4th July 2011
|
|||
|
|||
|
Project Machine 1:
PowerMac Quicksilver 2002 1.25 G RAM 250GB HD PPC G4 900MHz processor FreeBSD 9.0 CURRENT GNOME3 build environment Project Machine 2: SunBlade 1000 4.5G RAM 36G HD 2x UltraSPARC III 750 MHz FreeBSD 9.0 CURRENT GNOME 3 build environment, Qemu test environment
|
|
12th July 2013
|
||||
|
||||
|
Here's my new router/file/web/ftp server/firewall/SIP gateway (codename "MAINFRAME")
FOXCONN low-power mainboard (about $50) AMD E-240 CPU 1500MHz (built in) AMD VISION chipset 2 Fujitsu 250GB SATA-150 notebook drives (Software RAID I) <These are about 7 years old and still working great 1GB Hynix DDR3-1066 RAM (I only buy Hynix RAM nowadays because it's been pretty reliable for me) 2 Realtek gigabit LAN cards I stuffed it all into this nice aluminum case that was a Newbridge Networks v.35 bridge router circa 1993
|
|
7th February 2015
|
|||
|
|||
|
At the moment the original Raspberry Pi Model B, trying to get it working on my Raspberry Pi 2 Model B, might shrink my Win8 install and get FreeBSD on the second partition.
|
|
2nd April 2015
|
|||
|
|||
|
router:
Asus AM1M-A Athlon 5350 (sadly lacking full APU support in FreeBSD [R3 is Radeon HD8400 which is not supported yet AND crashes when full power saving features enabled (Kabini issue)] 4Gb unbuffered ECC DDR3 dual gigabit Intel Pro1000MT Atheros Ar9280 (EEPROM patched for ETSI regdomain and 802.11an support) Sandisk Standard 128Gb SSD pfSense 2.2 AMD64 (FreeBSD 10.1-RELEASE derivative) dual-boot PC AMD FX-8350 Asus M5A99X Evo R2.0 8Gb 1866Mhz Crucial Ballistix Sport DDR3 Nvidia Geforce GTX660 Ti 500Gb Samsung SATA2 IBM ServeRaid M5014 2x Seagate Cheetah 15k7 SAS 6Gb/s 300Gb in RAID0 FreeBSD 10.1-RELEASE AMD64 (KDE) Windows 7 x64 (some shooters on it) Last edited by aht0; 2nd April 2015 at 03:32 AM.
|
|
10th April 2015
|
|||
|
|||
|
MSI B85M-G43 Core i5-4460 3.2ghz 8GB Ram, Nvidia GTX260
Though I use PC-BSD not pure FreeBSD (10.1-RELEASE-p17 FreeBSD 10.1-RELEASE-p17)
|
|
11th January 2017
|
||||
|
||||
The BigZ box
This is a serious necro-bump but the thread is open so...
HP z800 2 6-core Xeons at 2.8 ghz, hyperthreaded (24 cores) 24 GB DDR3 ram 2 Samsung 850 Pro SSDs (512GB) 1 Samsung 850 Pro SSD (256GB) 1 WD Black (?) spinning disk for backups (2TB) Nvidia GTX560 It's not new (2010?) but has so much power, replacing it with something like a modern i7 quad would still be a step backwards.
__________________
"Give a Man a Truth And He Will Think For a Day. Teach a Man To Reason And He Will Think For a Lifetime."
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Your OpenBSD Hardware | mfaridi | OpenBSD General | 106 | 26th January 2018 09:03 AM |
| Hardware recommendation: what hardware to buy for my new FreeBSD desktop? | Broodjegehaktmetmayo | General Hardware | 92 | 11th February 2009 10:43 PM |
| What Sun hardware do you have | revzalot | General Hardware | 7 | 22nd August 2008 01:44 PM |
| Question about FreeBSD 7 and older HP Hardware. | EvoIX_MR2006 | FreeBSD Installation and Upgrading | 1 | 17th June 2008 07:37 PM |
| hardware not working | Terminal-Chaos | FreeBSD General | 2 | 29th May 2008 05:32 AM |
Linear Mode
