DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 23rd January 2010
vdubjunkie vdubjunkie is offline
Port Guard
 
Join Date: Feb 2009
Posts: 17
Thanked 0 Times in 0 Posts
Default switched motherboards 4.4

Hi all,

considered posting this in installation and upgrading, but I did neither. Feel free to move it should it make sense to do so.

I moved an existing OpenBSD 4.4 system on two ide drives to a new motherboard, yet the same 3 3com 905ctx cards. After telling my bios to use disk-1 I was proceeding forward nicely. However, when it was done booting, I had the request to tell it what shell to boot. Both disks seem to be recognized well. However, they are "not configured". Below is my dmesg gained by using a keyspan usb serial adapter on a mac running minicom and a "set tty com0" to capture the text

Code:
#  dmesg
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Unknown CPU Typ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.11 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,ME
real mem  = 1039691776 (991MB)
avail mem = 996839424 (950MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/28/04, BIOS32 rev. 0 @ 0xfb990, SMBIOS)
bios0: vendor Phoenix Technologies, LTD version "ASUS A7V8X-MX SE ACPI BIOS Rev4
bios0: ASUS A7V8X-MX SE
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd8d4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd830/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x7e00 0xc8000/0x8000! 0xd0000/0x800 0xd1000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: v3, aperture at 0xe0000000, size 0xf000000
drm at vga1 unsupported
xl0 at pci0 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 11, addressc
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci0 dev 9 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5, address 4
bmtphy1 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 7
xl2 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 10, addres4
bmtphy2 at xl2 phy 24: Broadcom 3C905C internal PHY, rev. 6
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2300CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2100CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel y
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV1204H>
wd0: 16-sector PIO, LBA, 114498MB, 234493056 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <IBM-DPTA-371360>
wd1: 16-sector PIO, LBA, 13042MB, 26712000 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address 00:11:21
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x0040632
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff6d netmask ff6d ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 " USB Keyboard" rev 1.10/1.2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 " USB Keyboard" rev 1.10/1.2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
__________________
anything done in the GUI is done more efficiently in cli
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Have you switched to 64 bits yet? ephemera General Hardware 24 19th September 2008 06:13 AM
Motherboards for AMD JMJ_coder General Hardware 10 5th August 2008 03:17 AM


All times are GMT. The time now is 05:37 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick