DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 23rd November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default 4.8, 600e, & sound

I also have the 600e and have just installed Openbsd 4.8.

(from some website, I cannot remember which) The 600e has two sound cards, one pci and one isa. Under linux the alsa
drivers will pick up the isa card, but under openbsd I have been completely unable to get that to work.

The acpi apm driver does seem to have worked and I can shut the case
and open the case and the system will come back up. Thanks guys

No sound though.
Reply With Quote
  #2   (View Single Post)  
Old 23rd November 2010
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,834
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by chrizby View Post
I also have the 600e and have just installed Openbsd 4.8.
I am splitting your message from the original thread:

http://daemonforums.com/showthread.php?p=35225

Even though this may be the same hardware, I suspect discussion on your hardware will take a different direction than the original. This site also tries to maintain simplicity in searching as a lot of members search old threads. Jumbling discussions together makes searching significantly more difficult to nearly impossible.
Quote:
...under openbsd I have been completely unable to get that to work.
What have you done for configuration thus far? Have you read Section 13.1 of the FAQ?

The output of mixerctl(1) is your next best friend. And quoting from Section 13.1:
Code:
Usually the controls have a meaningful label, but sometimes one must simply 
try different settings to see what effect each control has.
And on a different subject (although we try to limit threads to a single topic...):
Quote:
The acpi apm driver does seem to have worked and I can shut the case
and open the case and the system will come back up. Thanks guys
Very few project developers read this site. The regulars who engage most threads here are simply users coming to OpenBSD from different backgrounds.
Reply With Quote
  #3   (View Single Post)  
Old 24th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

Thanks for the response. Here is the output from mixerctl
Code:
outputs.master=128,128 volume
outputs.fmsynth=128,128 volume
outputs.cd=128,128 volume
outputs.dac=128,128 volume
outputs.mic=0 volume
outputs.line=0,0 volume
record.source=  [ mic cd line ]
inputs.treble=off  [ off on ]
inputs.bass=on  [ off on ]
From what I can gather, having messed around with this
for the last several months, many opensource operating systems
make a mistake when recognizing the sound system on the 600e

The only sound I can get out of the system is that you can
play music cd's. I would love to play mp3s and oggs.

Last edited by ocicat; 25th November 2010 at 01:18 PM. Reason: Please use [code] / [/code] tags in the future.
Reply With Quote
  #4   (View Single Post)  
Old 24th November 2010
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

Posting the dmesg in [code][/code] blocks will help us determine if multiple cards are indeed being detected.
Reply With Quote
  #5   (View Single Post)  
Old 24th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

Code:
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 364 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR
real mem  = 66482176 (63MB)
avail mem = 55533568 (52MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/20/99, BIOS32 rev. 0 @ 0xfd820, SMBIOS rev. 2.2 @ 0xf6cf0 (55 entries)
bios0: vendor IBM version "INET36WW" date 11/20/1999
bios0: IBM 26454AU
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x800
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9e20/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0x40000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1251 CardBus" rev 0x00: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1251 CardBus" rev 0x00: irq 11
clcs0 at pci0 dev 6 function 0 "Cirrus Logic CS4610 SoundFusion" rev 0x01: irq 11
reset_codec: AC97 inputs slot ready timeout
clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x06 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x04 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x38 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x08 data=0x0f0f
clcs0: AC97 write fail (DCV!=0) for add=0x0a data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x0c data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x10 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x14 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x16 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x1e data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x2a data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x7c
clcs0: AC97 read prob. (DCV!=0) for add=0x7e
clcs0: AC97 read prob. (DCV!=0) for add=0x00
ac97: codec id not read
clcs0: AC97 read prob. (DCV!=0) for add=0x28
clcs0: AC97 read prob. (DCV!=0) for add=0x02
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x18
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
clcs0: AC97 read prob. (DCV!=0) for add=0x1c
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x1a
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK239A-65B>
wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1902B, 1717> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask efcd netmask efcd ttymask ffdf
mtrr: Pentium Pro MTRR support
rl0 at cardbus0 dev 0 function 0 "D-Link DFE-690TXD" rev 0x10: irq 11, address 00:11:95:27:b2:6b
rlphy0 at rl0 phy 0: RTL internal PHY
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clcs0: firmware loaded
clcs0: AC97 read prob. (DCV!=0) for add=0x02
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x18
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
clcs0: AC97 read prob. (DCV!=0) for add=0x12
clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x0808
audio1 at clcs0
wd0(pciide0:0:0): timeout
	type: ata
	c_bcount: 16384
	c_skip: 0
wd0a: device timeout reading fsbn 427520 of 427520-427551 (wd0 bn 427584; cn 28 tn 67 sn 3), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
	type: ata
	c_bcount: 16384
	c_skip: 0
wd0a: device timeout writing fsbn 1675648 of 1675648-1675679 (wd0 bn 1675712; cn 110 tn 198 sn 38), retrying
wd0: soft error (corrected)
-------------------------------------------------------------------
Code:
$ audioctl     
name=SoundBlaster
version=3.02
config=SB_Pro
encodings=ulinear:8:1:1,mulaw:8:1:1*,alaw:8:1:1*,slinear:8:1:1*
properties=mmap,independent
full_duplex=0
fullduplex=0
blocksize=400
hiwat=163
lowat=122
output_muted=0
monitor_gain=0
mode=
play.rate=8000
play.sample_rate=8000
play.channels=1
play.precision=8
play.bps=1
play.msb=1
play.encoding=mulaw
play.gain=128
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
play.block_size=400
play.errors=0
record.rate=8000
record.sample_rate=8000
record.channels=1
record.precision=8
record.bps=1
record.msb=1
record.encoding=mulaw
record.gain=127
record.balance=32
record.port=0x0
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.block_size=400
record.errors=0
Thanks for any time you can spend on this. I am at my wits end, just jumped in to try obsd 4.8 on this system to test the suspend, resume and the sound.

Last edited by ocicat; 25th November 2010 at 01:21 PM. Reason: Please use [code] / [/code] tags in the future.
Reply With Quote
  #6   (View Single Post)  
Old 24th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

Code:
$ mplayer 432.mp3                                                               
MPlayer SVN-r30866 (C) 2000-2010 MPlayer Team

Playing 432.mp3.
Audio only file format detected.
Clip info:
 Title: 432 - War of the Worlds
 Artist: K7QO
 Album: K7QOs Code Course V3.0
 Year: 2007
 Comment: 
 Genre: Unknown
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 11025 Hz, 2 ch, s16le, 16.0 kbit/4.54% (ratio: 2000->44100)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
ao2: can't open sndio
ao2: 11025 Hz  2 chans  s16le [0x9]
[AO SUN] audio_setup: your card doesn't support 2 channel, little-endian 16-bit signed int, 11025 Hz samplerate.
---------------
mp3blaster doesn't work either but it doesn't give a useful error message.

------------------

Bios is up to date. Set the Quick Boot to disable. I have tried disable one or the other card during bootup ukc.

Last edited by ocicat; 25th November 2010 at 01:22 PM. Reason: Please use [code] / [/code] tags in the future.
Reply With Quote
  #7   (View Single Post)  
Old 24th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

Code:
$ mplayer 432.mp3                                                               
MPlayer SVN-r30866 (C) 2000-2010 MPlayer Team

Playing 432.mp3.
Audio only file format detected.
Clip info:
 Title: 432 - War of the Worlds
 Artist: K7QO
 Album: K7QOs Code Course V3.0
 Year: 2007
 Comment: 
 Genre: Unknown
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 11025 Hz, 2 ch, s16le, 16.0 kbit/4.54% (ratio: 2000->44100)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
ao2: can't open sndio
ao2: 11025 Hz  2 chans  s16le [0x9]
[AO SUN] audio_setup: your card doesn't support 2 channel, little-endian 16-bit signed int, 11025 Hz samplerate.
---------------
mp3blaster doesn't work either but it doesn't give a useful error message.

------------------

Bios is up to date. Set the Quick Boot to disable. I have tried disable one or the other card during bootup ukc.

Last edited by ocicat; 25th November 2010 at 01:23 PM. Reason: Please use [code] / [/code] tags in the future.
Reply With Quote
  #8   (View Single Post)  
Old 24th November 2010
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

Hopefully someone will modify your posts, you should really put that inside [code](HERE)[/code] blocks.. it preserves formatting and makes it possible for us to read the output without wanting to pull out our hair.

Your PCI sound card is from Cirrus Logic, it appears to have a legacy ISA fallback for SoundBlaster emulation, this was once useful for legacy DOS/Win3x applications.

What was the effect of disabling either clcs(4) or sb(4) in UKC or config(8)? is there no option in the BIOS to disable this permanently?

The driver for the "native" PCI chipset appears to be suffering some sort of initialization problem, but it doesn't appear to be fatal as it proceeds to attach.. unfortunately so does the conflicting ISA card.
Reply With Quote
  #9   (View Single Post)  
Old 24th November 2010
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

Note; you also appear to be having problems with your primary hard drive.. soft corrected errors can be an issue of bad IDE cables, but it's typically a sign of a failing drive (..remapping sectors).

Also consider disabling apm, this will allow acpi to work.. it probably won't be of much benefit on an older system, but it can't hurt to try.
Reply With Quote
Old 24th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

Sorry about the formatting I will remember that for the future.

-----
What was the effect of disabling either clcs(4) or sb(4) in UKC or config(8)? is there no option in the BIOS to disable this permanently?
------

Well, nothing I have done has resulted in either sound card getting recognized by one of the programs I would like to use; mplayer, mp3blaster, morseplayer. It looks like mixerctl and audioctl see some kind of sound card but that hasn't done much for me. Its odd that audio cd's work but mplayer doesn't.


Interesting linux info. I got the card to work on suse 8.2 using alsa.
http://www.thinkwiki.org/wiki/CS4239


As for the soft error, I assumed that had something to do with the suspend-resume, since the dmesg was run just after I closed and opened the case.
Reply With Quote
Old 24th November 2010
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

It's not odd for audio CD's, typically they have a direct line from the drive to the sound card.. the firmware in the drive is capable of playing the CD itself.

The cdio(1) utility in base can send this command, or extract the raw tracks which can be sent to the audio(4) device.

Once you disable either of the sound cards, it will take precedence, this will allow mixerctl/audictl to work without manually specifying the target device.

If mplayer fails to work (..errors vs silence) then it may indeed need special handling in a driver, if it's silent it may just be muted.

In that Wiki, it seems they have a native driver that works over the ISA interface.. vs the PCI "native" interface, OpenBSD has no driver for ISA cirrus cards.

Last edited by BSDfan666; 24th November 2010 at 10:45 PM.
Reply With Quote
Old 24th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

There is no way to disable either of the sound cards in the bios, unfortunately, and disabling one or the other of them using ukc had no real effect. In that, the programs I use could not recognize the active card.

If OpenBSD has no ISA cirrus driver, then this all may be for naught.
Hate to reinstall linux or windows on this machine. Maybe I can live without sound, heh? Oh well, one of the speakers is blown anyways, and when you are typing your hands cover the speaker, so you get a wah-wah effect on anything coming out of it.

Unless someone can work some magic, I am going to have to suffer in silence.
thanks
Reply With Quote
Old 24th November 2010
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

Well, you can report the problem to the mailing lists if you want a more decisive answer, but before abandoning OpenBSD entirely, think of a possible alternative solution.

This system has a USB 1.0 controller, you could find a USB sound card (..speakers/headphones), these are generally supported by the uaudio(4) driver.

Would that be possible? or is buying additional hardware out of the question?
Reply With Quote
Old 25th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

At this point, money is real tight, but I will keep that as an option. Besides until I get more ram and a bigger hard drive on this system, a sound card is lower on the priority list.

I run openbsd on other systems, have done so since 2.9, not an expert but I like it so. Trust me, openbsd must be pretty special to get this 'unix hater' to use nix as much as I do now.

Why is it taking several minutes for the 'submit reply' process to finish? Just asking.

Thanks for your time.
Reply With Quote
Old 26th November 2010
chrizby chrizby is offline
New User
 
Join Date: Nov 2010
Posts: 9
Thanked 0 Times in 0 Posts
Default

One last thing. In an attempt to get as much info up there as possible.

This is for the isa card.

Code:
$ audioctl -f /dev/audio0     
name=SoundBlaster
version=3.02
config=SB_Pro
encodings=ulinear:8:1:1,mulaw:8:1:1*,alaw:8:1:1*,slinear:8:1:1*
properties=mmap,independent
full_duplex=0
fullduplex=0
blocksize=400
hiwat=163
lowat=122
output_muted=0
monitor_gain=0
mode=
play.rate=8000
play.sample_rate=8000
play.channels=1
play.precision=8
play.bps=1
play.msb=1
play.encoding=mulaw
play.gain=128
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
play.block_size=400
play.errors=0
record.rate=8000
record.sample_rate=8000
record.channels=1
record.precision=8
record.bps=1
record.msb=1
record.encoding=mulaw
record.gain=127
record.balance=32
record.port=0x0
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
This is for the pci card

Code:
$ audioctl -f /dev/audio1
name=CS4280
version=
config=cs4280
encodings=ulinear:8:1:1,mulaw:8:1:1*,alaw:8:1:1*,slinear:8:1:1,slinear_le:16:2:1,ulinear_le:16:2:1,slinear_be:16:2:1,ulinear_be:16:2:1
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=8192
hiwat=8
lowat=6
output_muted=0
monitor_gain=0
mode=play
play.rate=48000
play.sample_rate=48000
play.channels=2
play.precision=16
play.bps=2
play.msb=1
play.encoding=slinear_le
play.gain=255
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=1
play.active=0
play.buffer_size=65536
play.block_size=8192
play.errors=0
record.rate=48000
record.sample_rate=48000
record.channels=2
record.precision=16
record.bps=2
record.msb=1
record.encoding=slinear_le
record.gain=191
record.balance=32
record.port=0x1
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=1
record.active=0
record.buffer_size=65536
record.block_size=8192
record.errors=0
ecord.block_size=400
record.errors=0
Every time I go in and work on this I get my hopes up, only to have them dashed again, because I can't get this to work.
Reply With Quote
Old 26th November 2010
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,834
Thanked 190 Times in 160 Posts
Default

My recommendation would be to submit a problem report detailing a much information as possible. Guidelines on filing reports can be found at the following:

http://www.openbsd.org/report.html

If you submit a report, be thorough. The developers have no crystal ball, nor do they most likely have your hardware, but perhaps they can glean enough from your description & recounting of experimentation in order to help.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help with sound guitarscn OpenBSD General 2 6th November 2010 07:01 PM
Installing OpenBSD on Thinkpad 600e sacman08 OpenBSD Installation and Upgrading 7 30th September 2010 12:13 AM
no sound phill OpenBSD General 4 28th October 2009 04:23 PM
Recording sound with external sound card backrow OpenBSD General 5 21st August 2009 08:17 PM
USB Sound? FreeMan OpenBSD General 16 7th May 2008 06:09 AM


All times are GMT. The time now is 03:20 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick