DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 6th August 2011
wlm2 wlm2 is offline
Port Guard
 
Join Date: Jun 2011
Posts: 32
Thanked 0 Times in 0 Posts
Default need help to configure netstick.

I need help to configure a netstick (Orange iCON 225 UMTS USB stick).

I use an openbsd operating system.

I'd appreciate your help asap and examples are more then welcome.
thanks in advance.
matthew.
Reply With Quote
  #2   (View Single Post)  
Old 6th August 2011
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

When you connect your USB device, the kernel posts messages about what device(s) and controller(s) are connecting, and the associated device drivers assigned, if any. This output is in (up to) five places:

1) On your console, in white text on blue background, which you would see if you were not running X Windows at the time. From i386/amd64 architectures, you can switch to the console with Alt+Ctrl+F1, and back to your X Windows with Alt+Ctrl+F5.

2) In your dmesg(8).

3) In /var/log/messages.

4) In /var/run/dmesg.boot.

5) In an xconsole(1) window, if you are using that tool.

-----

From that, if you cannot determine what device(s) are available when you connect your USB device, please post the contents of /var/run/dmesg.boot here.
Reply With Quote
  #3   (View Single Post)  
Old 6th August 2011
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,834
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by wlm2 View Post
I need help to configure a netstick...
In addition to jggimi's comments, you will find this topic addressed in Section 14.17 of the FAQ.

We highly recommend all users of OpenBSD familiarize themselves with the complete FAQ. Most questions posed to us at this site (including questions posed by you in the past...) are answered in this document. You will save yourself significant time & aggravation by taking time now to study the FAQ.
Reply With Quote
  #4   (View Single Post)  
Old 30th September 2011
wlm2 wlm2 is offline
Port Guard
 
Join Date: Jun 2011
Posts: 32
Thanked 0 Times in 0 Posts
Default need help to configure a netstick

This is the detail I received after I ran the command /var/run/dmesg .

Do I need to install DRIVER for the cellualr NETSTICK.

Code:
OpenBSD 4.9 (GENERIC) #671: Wed Mar  2 07:09:00 MST 2011
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 M
Hz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem  = 268009472 (255MB)
avail mem = 253493248 (241MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00
:0d:b9:1c:96:80
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 0
0:0d:b9:1c:96:81
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579
545Hz timer, watchdog, gpio
gpio0 at glxpcib0: 32 pins
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wire
d to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <CF 4GB>
wd0: 1-sector PIO, LBA, 3831MB, 7847280 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
biomask f3e7 netmask ffe7 ttymask ffff
mtrr: K6-family MTRR support (2 registers)
nvram: invalid checksum
umsm0 at uhub1 port 3 configuration 1 interface 0 "Option N.V. Globetrotter HSDP
A Modem" rev 1.10/0.00 addr 2
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clock: unknown CMOS layout
umsm0 detached
umsm0 at uhub1 port 3 configuration 1 interface 0 "Option N.V. Globetrotter HSDP
A Modem" rev 1.10/0.00 addr 2
ucom0 at umsm0
umsm1 at uhub1 port 3 configuration 1 interface 1 "Option N.V. Globetrotter HSDP
A Modem" rev 1.10/0.00 addr 2
ucom1 at umsm1
umsm2 at uhub1 port 3 configuration 1 interface 2 "Option N.V. Globetrotter HSDP
A Modem" rev 1.10/0.00 addr 2
ucom2 at umsm2
duplicate IP address 192.168.1.102 sent from ethernet address 02:21:6a:ac:a8:e8
duplicate IP address 192.168.1.102 sent from ethernet address 02:21:6a:ac:a8:e8

Last edited by ocicat; 17th October 2011 at 05:03 PM. Reason: Please use [code] & [/code] tags when posting screen output.
Reply With Quote
  #5   (View Single Post)  
Old 30th September 2011
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,435
Thanked 214 Times in 189 Posts
Default

Quote:
Originally Posted by wlm2 View Post
Do I need to install DRIVER for the cellualr NETSTICK.
There are no add-on drivers for any hardware with OpenBSD. It uses a monolithic kernel.

This is a umsm(4) Qualcomm modem adapter:
Code:
umsm0 at uhub1 port 3 configuration 1 interface 0 "Option N.V. Globetrotter HSDP
A Modem" rev 1.10/0.00 addr 2
This is a ucom(4) tty device for using with serial programs, such as either the kernel or userland PPP programs:
Code:
ucom0 at umsm0
See FAQ 6.5.
Reply With Quote
  #6   (View Single Post)  
Old 30th September 2011
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

No, it's clearly being enumerated properly, but you have ucom[0-2], so you'll need to discover which one is accepting AT commands.

You can use cu(1)/tip(1) to send raw commands, ATI should return something on one or more of the devices..

Just in case you're not sure what the device nodes are:
/dev/cuaU0
/dev/cuaU1
/dev/cuaU2


Once you've figured that out, you'll need to establish a PPP connection, I don't really know much about these devices.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
configure dwm in pkgsrc? queshaw NetBSD Package System (pkgsrc) 7 10th March 2011 07:15 PM
How to configure VSFTPD? Sunsawe FreeBSD Ports and Packages 8 26th September 2009 02:28 PM
how to configure ipfw with 4 modems??? m4st3rcr4zy FreeBSD General 0 13th February 2009 06:26 AM
configure iwi0 milo974 OpenBSD General 1 4th August 2008 12:27 PM
Ath0 + wpa, how configure? nesca2in1 FreeBSD General 10 2nd July 2008 04:12 AM


All times are GMT. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick