Is my OpenBSD system abnormally slow? (Newbie / pretty old hardware)
The short version: I freshly installed OpenBSD 5.0 on an old Pentium-MMX laptop, 300 MHz, 128 MB of RAM, and net throughput when accessing this machine from LAN seems to only around 20 kbytes/s (160 kbit/s).
I discovered this when screwing around with samba, but sftp and ftp have similar throughput (i.e., the same order of magnitude). The appx 20 kbytes/sec was measured with ftp.
The ethernet card is 100 mbit capable, and the "100" LED is lit. The OpenBSD machine was connected to the other machine via a linksys router running Tomato. I have no reason to believe there is a problem with the other computer or the router, as I get "normal" speeds otherwise in this network.
I have tried to be a good (not perfect) newbie and googled around and checked man pages, but "slow OpenBSD system" in any compbination only seems to bring up religious flamewars and nothing that relates to my question.
Anyway, the question is: is this speed what I could expect? I think not, right?
And the follow up question: What would be a good tree to bark up, to try to speed it up? Any clues are appreciated. Could it be some bottleneck related to the cardbus? Is there some way to query the actual link speed of the interface?
It's my first post and i realize I don't know so much about this stuff, I don't expect to be spoonfed, just perhaps a clue or two ... please be gentle!
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011 firstname.lastname@example.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 300 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX real mem = 133689344 (127MB) avail mem = 121520128 (115MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 01/01/97, BIOS32 rev. 0 @ 0xf0210 apm0 at bios0: Power Management spec V1.2 (slowidle) (BIOS management disabled) apm0: APM power management enable: unrecognized device ID (9) apm0: APM engage (device 1): power management disabled (1) pcibios0 at bios0: rev 2.1 @ 0xf0200/0xb00 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbad0/144 (7 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xa000 cpu0 at mainbus0: (uniprocessor) cpu0: F00F bug workaround installed pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Acer Labs M1531 PCI" rev 0xb3 pcib0 at pci0 dev 2 function 0 "Acer Labs M1533 ISA" rev 0x0a cbb0 at pci0 dev 5 function 0 "O2 Micro OZ6832 CardBus" rev 0x34: irq 9 cbb1 at pci0 dev 5 function 1 "O2 Micro OZ6832 CardBus" rev 0x34: irq 9 vga1 at pci0 dev 6 function 0 "Neomagic Magicgraph NM2160" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pciide0 at pci0 dev 11 function 0 "Acer Labs M5229 UDMA IDE" rev 0x20: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <HTS721080G9AT00> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-220EA, 1.0A> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 alipm0 at pci0 dev 12 function 0 "Acer Labs M7101 Power" rev 0x09: SMBus disabled ohci0 at pci0 dev 15 function 0 "Acer Labs M5237 USB" rev 0x03: irq 10, version 1.0, legacy support isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec isapnp0 at isa0 port 0x279: read port 0x203 ym0 at isapnp0 "YAMAHA OPL3-SAx Audio System, YMH0021, , " port 0x220/16,0x530/8,0x388/8,0x330/2,0x370/2 irq 5 drq 0,7 midi0 at ym0: <YM MPU-401 UART> audio0 at ym0 "LT Win Modem, HSM0A19, , " at isapnp0 port 0x2e8/8,0x100/8 irq 3 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x20 pcmcia1 at cardslot1 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 rl0 at cardbus1 dev 0 function 0 "Realtek 8139" rev 0x10: irq 9, address 00:10:60:75:92:67 rlphy0 at rl0 phy 0: RTL internal PHY umass0 at uhub0 port 1 configuration 1 interface 0 "JMicron Samsung S2 Portable" rev 2.00/0.00 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Samsung, S2 Portable, > SCSI2 0/direct fixed serial.04e81f05E09310502425 sd0: 476940MB, 512 bytes/sector, 976773168 sectors vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on wd0a (a6524047e1c9388a.a) swap on wd0b dump on wd0b wd0a: DMA error reading fsbn 128 of 128-143 (wd0 bn 192; cn 0 tn 3 sn 3), retrying wd0: transfer error, downgrading to Ultra-DMA mode 1 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 wd0a: DMA error reading fsbn 128 of 128-143 (wd0 bn 192; cn 0 tn 3 sn 3), retrying wd0: soft error (corrected)
/dev/wd0a on / type ffs (local) /dev/wd0k on /home type ffs (local, nodev, nosuid) /dev/wd0d on /tmp type ffs (local, nodev, nosuid) /dev/wd0f on /usr type ffs (local, nodev) /dev/wd0g on /usr/X11R6 type ffs (local, nodev) /dev/wd0h on /usr/local type ffs (local, nodev) /dev/wd0j on /usr/obj type ffs (local, nodev, nosuid) /dev/wd0i on /usr/src type ffs (local, nodev, nosuid) /dev/wd0e on /var type ffs (local, nodev, nosuid) /dev/sd0a on /u type ffs (local)
# cd /home/samba # dd if=/dev/zero of=test1g count=1048576 bs=1024 1048576+0 records in 1048576+0 records out 1073741824 bytes transferred in 121.220 secs (8857790 bytes/sec) # dd if=/dev/zero of=test100m count=102400 bs=1024 102400+0 records in 102400+0 records out 104857600 bytes transferred in 10.529 secs (9958290 bytes/sec) # cp test100m /root/test100m.0 # cd root # /usr/local/bin/smbclient -U samba //localhost/samba put test100m.0 putting file test100m.0 as \test100m.0 (3453.0 kb/s) (average 3453.0 kb/s) smb: \>
|Thread||Thread Starter||Forum||Replies||Last Post|
|Your OpenBSD Hardware||mfaridi||OpenBSD General||93||7th September 2016 11:08 PM|
|OpenBSD hardware support on Mac Air & Asus Zenbook||sysfu||OpenBSD General||7||13th December 2011 10:47 PM|
|OpenBSD slow internet?||guitarscn||OpenBSD General||4||27th November 2010 05:25 PM|
|dd slow, 1500KB/s (OpenBSD LiveCD)||Carpetsmoker||OpenBSD General||4||3rd October 2008 10:33 AM|
|NetBSD: pretty fonts||anomie||NetBSD General||3||21st May 2008 03:00 PM|