DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 2nd June 2012
obsdnewbie obsdnewbie is offline
New User
 
Join Date: Jun 2012
Posts: 5
Thanked 0 Times in 0 Posts
Default kernel panic (amd64,5.1 release) on Aspire 5750

Hi there i'm new to the forum and OBSD in general, i'm hoping to drop two or three distro installs for OBSD, starting with my notebook.My goal is to run current so i instaled the snapshot and after rebooting it, the kernel panicked, then i installed the release version with the same results.It is worth noting that the installer presented this unusual line in both versions: " uhub0: device problem, disabling port 1" The outputs after install also have been the same but for consistency i'm posting the outputs for the release version:

Dmsg:
Code:
OpenBSD 5.1 (GENERIC.MP) #207: Sun Feb 12 09:42:14 MST 2012
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 4138987520 (3947MB)
avail mem = 4014641152 (3828MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe65a0 (52 entries)
bios0: vendor Acer version "V1.20" date 03/16/2012
bios0: Acer Aspire 5750
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT
acpi0: wakeup devices POP1(S4) GLAN(S0) EHC1(S3) HDEF(S0) PXSX(S4) RP01(S4) PXS
X(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PEG0(S4) P
EGP(S4) PEG1(S4) PEG2(S4) PEG3(S4)
acpitimer0 at acpi0:  3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2295.15 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (POP1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0Store to default type!  8

1f45 Called: \_SB_.PCI0.LPCB.EC0_._REG
  arg0:  0xffff8000001ac208 cnt:01 stk:00 integer: 3
  arg1:  0xffff8000001ac188 cnt:02 stk:00 integer: 1
1f74 Called: \_SB_.PCI0.LPCB.EC0_._REG
  arg0:  0xffff8000001ac208 cnt:01 stk:00 integer: 3
  arg1:  0xffff8000001ac188 cnt:02 stk:00 integer: 1
panic: aml_die aml_store:2584
Stopped at	Debugger+0x5:	leave
Debugger() at Debugger+0x5
panic() at panic+0xe4
_aml_die() at _aml_die+0x183
aml_store() at aml_store+0xbb
aml_parse() at aml_parse+0xcd7
aml_eval() at aml_eval+0x1c8
aml_evalnode() at aml_evalnode+0x63
acpiec_reg() at acpiec_reg+0x6a
acpiec_attach() at acpiec_attach+0x41
config_attach() at config_attach+0x1d4
end trace frame: 0xffffffff80e3ba00, count: 0
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
Trace output:
Code:
Debugger() at Debugger+0x5
panic() at panic+0xe4
_aml_die() at _aml_die+0x183
aml_store() at aml_store+0xbb
aml_parse() at aml_parse+0xcd7
aml_eval() at aml_eval+0x1c8
aml_evalnode() at aml_evalnode+0x63
acpiec_reg() at acpiec_reg+0x6a
acpiec_attach() at acpiec_attach+0x41
config_attach() at config_attach+0x1d4
acpi_foundec() at acpi_foundec+0xce
aml_find_node() at aml_find_node+0x92
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
acpi_attach() at acppi_attach+0x4f0
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
config_attach() at config_attach+0x1d4
mainbus_attach() at mainbus_attach+0x53
config_attach() at config_attach+0x1d4
cpu_configure() at cpu_configure+0x17
main() at main+0x405
end trace frame: 0x0, count: -25
Ps output:
Code:
   PID   PPID   PGRP   UID  S        FLAGS  WAIT	            COMMAND
*    0	     -1        0      0   7         0X200                      swapper
Is the list for this report also dmesg@ or there's another list for panics, similar to linux?

I'd really apreciate any ideas or pointers if possible


Thanks for your time and best regards

Last edited by ocicat; 2nd June 2012 at 06:18 PM. Reason: Please use [code] / [/code] tags when posting command output.
Reply With Quote
  #2   (View Single Post)  
Old 2nd June 2012
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,876
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by obsdnewbie View Post
Hi there i'm new to the forum and OBSD in general...
Welcome!
Quote:
i'm hoping to drop two or three distro installs for OBSD...
As a difference in both terminology & culture, the Linux community uses the word "distro" given that everyone uses the same kernel with differences only in userland & configuration. The *BSD world doesn't use this same terminology. Given that the *BSD projects coordinate everything together -- kernel + userland -- the term used in this culture is more "system".
Quote:
Is the list for this report also dmesg@ or there's another list for panics, similar to linux?
No. The following link will give all information you will need to report this upstream:

http://www.openbsd.org/report.html

While I understand that putting together a good problem report takes time, I would recommend providing information for both 5.1-release & the snapshot used (including dmesg(8) from the snapshot...). As the dmesg(8) from OpenBSD 5.1-release states, -release was tagged in CVS mid-February. Development on -current (& your snapshot if it is recent...) has continued for another ~3.5 months. The project developers will be more interested in the results with the snapshot used than -release.

Last edited by ocicat; 2nd June 2012 at 06:27 PM.
Reply With Quote
  #3   (View Single Post)  
Old 2nd June 2012
obsdnewbie obsdnewbie is offline
New User
 
Join Date: Jun 2012
Posts: 5
Thanked 0 Times in 0 Posts
Default

Thanks Ocicat for your fast reply and your generous welcome.It is because of BSD's culture of security and coordination (no patchwork and no reinventing unnecessarily ) that i'm trying to replace Linux in favor of OBSD.Particularly what u guys have done with malloc rocks everyone else (i'm an end user so particularly when i read about it got me thinking "wait the other systems are nothing like this, i've gotta try it".Sorry about the terminology though.
Thanks for the pointer this way i can report it as soon as possible
The outputs for the versions were exactly the same.The snapshot i used was from 20/05 but there's a new one from 25/05 i'll try that to see if it still persists then provide both.

Thanks for your time and best regards
Reply With Quote
  #4   (View Single Post)  
Old 2nd June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,640
Thanked 214 Times in 189 Posts
Default

Hello, and welcome. You may find the crash(8) man page helpful, as well.
Reply With Quote
  #5   (View Single Post)  
Old 2nd June 2012
obsdnewbie obsdnewbie is offline
New User
 
Join Date: Jun 2012
Posts: 5
Thanked 0 Times in 0 Posts
Default

Thanks for your kind welcome Jggimi.And also for the pointer.i must say it is astounding for someone coming from other soft cultures too see how much attention it's given by the devs to updating and writing the man pages especialy some like this one.
Reply With Quote
  #6   (View Single Post)  
Old 3rd June 2012
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,876
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by obsdnewbie View Post
it is astounding for someone coming from other soft cultures too see how much attention it's given by the devs...
The OpenBSD project developers do put importance on the correctness of the documentation.

However, recognize that this site has few project developers as members who regularly join into discussion. Those who answer questions on this site are not officially affiliated with the OpenBSD project, however, some have contributed ports. This site's membership is composed of a number of enthusiasts ranging from professionals to hobbyists.
Reply With Quote
  #7   (View Single Post)  
Old 4th June 2012
obsdnewbie obsdnewbie is offline
New User
 
Join Date: Jun 2012
Posts: 5
Thanked 0 Times in 0 Posts
Default

Thanks for the heads up ocicat and thank you and jggime for the pointers and info.As for the thread, the newest snapshot (25/05) presented the same problem (only with minor adresss diferences) so i reported it upstream.Will post follow up ASAP.

Thanks & Best Regards
Reply With Quote
  #8   (View Single Post)  
Old 4th June 2012
obsdnewbie obsdnewbie is offline
New User
 
Join Date: Jun 2012
Posts: 5
Thanked 0 Times in 0 Posts
Default

Thanks to Gregory i managed to boot current with no acpi and it works fine for me!!
For those who have the same laptop and can't manage without it i'll be posting followup as soon as it's working.
I'd like to thank all of you guys for your kind help!!

Best Regards
Reply With Quote
  #9   (View Single Post)  
Old 4th June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,640
Thanked 214 Times in 189 Posts
Default

Warning -- acpi(4) includes heat management -- disabling it risks overheating computers that do not have apm(4) support. APM predates ACPI, so most modern i386/amd64 systems do not support it.

Last edited by jggimi; 4th June 2012 at 06:16 PM. Reason: typo
Reply With Quote
Old 5th June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,640
Thanked 214 Times in 189 Posts
Default

To elaborate on the impact of disabling acpi(4); Theo wrote in bugs@:
Code:
Most modern PC's will not run if the ACPI code is disabled.  They will
break in a multitude of other ways, and you are not helping find the
bug AT ALL.  The least of the problem is that the fan might not run.

They might map reigsters wrong.  They might map interrupts wrong.  They
will route interrupts from from behind ppb bridges.  Disabling the acpi
codebase creates many crazy, crazy, crazy side effects.
Reply With Quote
Old 5th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Hi @obsdnewbie ! and welcome to this wonderful forum wherefrom I learn many things.
@jgimmi, thank you so much for the useful acpi-related hints !
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
kernel panic on imac .. daemonfowl OpenBSD Installation and Upgrading 11 24th February 2012 12:48 AM
OpenBSD ACER aspire 9300 laptop install panic marcv OpenBSD Installation and Upgrading 8 13th September 2011 08:43 AM
FreeBSD 8.0-RELEASE as DomU(hvm; i386): kernel panic deadeyes FreeBSD Installation and Upgrading 6 5th January 2010 09:55 PM
7.1-RELEASE AMD64 SMP kernel??? Randux FreeBSD Installation and Upgrading 11 6th January 2009 08:17 PM
Aaah! Help! Kernel panic! 7.0-RELEASE-p4 Weaseal FreeBSD General 4 2nd October 2008 02:47 PM


All times are GMT. The time now is 08:28 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick