DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 16th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default linear framebuffer access unavailable .. Caught signal 11 (Segmentation fault)

Hi everybody!

I upgraded OpenBSD-5.1 from stable to current .. after sysmerging I was asked what to do .. I chose m (merge) and i (install) instead of default option (leaving files until later for manual editing)

After reboot I couldn't start X :
Xorg.0.log
Code:
    70.025] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
	(Operation not permitted)
	Check that you have set 'machdep.allowaperture=1'
	in /etc/sysctl.conf and reboot your machine
	refer to xf86(4) for details
[    70.025] 	linear framebuffer access unavailable
[    70.025] Segmentation fault at address 0x0
[    70.026] 
Fatal server error:
[    70.026] Caught signal 11 (Segmentation fault). Server aborting
[    70.026] 
[    70.026] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    70.026] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    70.026] 
[    70.027] Server terminated with error (1). Closing log file.
dmesg
Code:
OpenBSD 5.1-current (GENERIC.MP) #277: Tue Jun 12 18:40:02 MDT 2012
    todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2250 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM
real mem  = 2145447936 (2046MB)
avail mem = 2099544064 (2002MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/13/07, BIOS32 rev. 0 @ 0xfd390, SMBIOS rev. 2.33 @ 0xe3810 (25 entries)
bios0: vendor Acer version "V3.50" date 02/13/2007
bios0: Acer Aspire 5610
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG SLIC DBGP APIC BOOT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PXS1(S4) PXS2(S4) BCOL(S4) PXS4(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S5) MODM(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2250 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus 5 (RP04)
acpiprt6 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 85 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpibat0 at acpi0: BAT1 model "GC86503SY90 " type Lion oem "SONY "
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: GFX0
bios0: ROM list: 0xc0000/0xe000 0xce000/0x1800 0xe0000/0x1800! 0xe3800/0x800!
cpu0: Enhanced SpeedStep 1730 MHz: speeds: 1733, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 Go" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC883, Conexant/0x2c06, using Realtek ALC883
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 19
pci5 at ppb4 bus 5
wpi0 at pci5 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:19:d2:28:eb:bc
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci6 at ppb5 bus 6
bce0 at pci6 dev 1 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 21, address 00:16:d4:d2:d6:5e
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
cbb0 at pci6 dev 4 function 0 "ENE CB-712 CardBus" rev 0x10: apic 1 int 16
"ENE Memory Stick" rev 0x01 at pci6 dev 4 function 1 not configured
sdhc0 at pci6 dev 4 function 2 "ENE SD Controller" rev 0x01: apic 1 int 17
sdmmc0 at sdhc0
"ENE Flash memory" rev 0x01 at pci6 dev 4 function 3 not configured
"ENE SD/MMC" rev 0x01 at pci6 dev 4 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST96812AS>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7590A, 1.04> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Logitech product 0x09b0" rev 2.00/0.06 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (752aa17f57263e9e.a) swap on wd0b dump on wd0b
wpi0: fatal firmware error
firmware error log (count=1):
  error type = "SYSASSERT" (0x00000005)
  error data      = 0x00000074
  branch link     = 0x000008B600000274
  interrupt link  = 0x0000032000003560
  time            = 1618370039
driver status:
  tx ring  0: qid=0  cur=4   queued=0  
  tx ring  1: qid=1  cur=0   queued=0  
  tx ring  2: qid=2  cur=0   queued=0  
  tx ring  3: qid=3  cur=0   queued=0  
  tx ring  4: qid=4  cur=21  queued=0  
  tx ring  5: qid=5  cur=0   queued=0  
  rx ring: cur=37
  802.11 state 4
umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston DataTraveler G2" rev 2.00/1.10 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler G2, PMAP> SCSI0 0/direct removable serial.09306545B910B32903AB
sd0: 15320MB, 512 bytes/sector, 31375360 sectors
kern.version
Code:
kern.version=OpenBSD 5.1-current (GENERIC.MP) #277: Tue Jun 12 18:40:02 MDT 2012
    todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
( I chose m and i because I had no idea what to manually edit afterwards (ie, default option)

Any help/correction/suggestion/hint is much appreciated
Thank you !
Reply With Quote
  #2   (View Single Post)  
Old 16th June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,687
Thanked 214 Times in 189 Posts
Default

X cannot start because the i386 X aperture is set to 0 (disabled).
Code:
    70.025] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem     
(Operation not permitted)     
Check that you have set 'machdep.allowaperture=1'     
in /etc/sysctl.conf and reboot your machine     
refer to xf86(4) for details
Apparently, your improper use of sysmerge(8) overlayed your customizations. This particular customization was done during installation, when you told the installation script you planned to use X.

As best practice, you should have backed up /etc before running sysmerge. If you did not, you may still find the original, unchanged files in a backup directory under the sysmerge working directory in the /var/tmp tree. See the sysmerge(8) man page for further information.
Reply With Quote
  #3   (View Single Post)  
Old 17th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Thank you @jgimmi !
Unfortunately I forgot to backup /etc on this disk.The /etc backup located in /var/tmp/sysmere*****/ didn't help and it is far smaller in size than the original /etc.
Can you think of a way out ? (I have a similar disk for the same machine)
Sorry for being such a nuisance again.
Reply With Quote
  #4   (View Single Post)  
Old 17th June 2012
adamk adamk is offline
Spam Deminer
 
Join Date: May 2008
Posts: 250
Thanked 5 Times in 8 Posts
Default

To get X working again, all you need is this option in /etc/sysctl.conf:

Code:
machdep.allowaperture=1
If you made any other changes to that file, hopefully you remember what they were :-)

Adam
Reply With Quote
  #5   (View Single Post)  
Old 17th June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,687
Thanked 214 Times in 189 Posts
Default

Quote:
Originally Posted by daemonfowl View Post
...I forgot to backup /etc on this disk.
And this is a good example of why we keep recommending backups to you. The most you have ever stated in response is that you might consider it one day in the future.
Quote:
...The /etc backup located in /var/tmp/sysmere*****/ didn't help and it is far smaller in size than the original /etc.....
The backup directory should contain backups of the files that were altered. Look for a sysctl.conf file. If it isn't there, you can edit /etc/sysctl.conf and set the aperture to 2, required for X on i386.

Your incorrect sysctl.conf is only one possible error of many.
You should sort through /etc by date of last update (use ls(1), of course) and manually check any updated files, editing as applicable.

Last edited by jggimi; 17th June 2012 at 04:41 PM. Reason: multiple typos
Reply With Quote
  #6   (View Single Post)  
Old 17th June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,687
Thanked 214 Times in 189 Posts
Default

Quote:
Originally Posted by adamk View Post
To get X working again, all you need is this option in /etc/sysctl.conf:

Code:
machdep.allowaperture=1
Adam, this is not the case for i386, where the xf86(4) aperture driver control must be set to 2. See FAQ 11.2.6 and its README.i386 link.

Last edited by jggimi; 17th June 2012 at 06:44 PM. Reason: clarity
Reply With Quote
  #7   (View Single Post)  
Old 17th June 2012
adamk adamk is offline
Spam Deminer
 
Join Date: May 2008
Posts: 250
Thanked 5 Times in 8 Posts
Default

Sorry, silly me assuming the error Xorg gave would be correct :-)
Reply With Quote
  #8   (View Single Post)  
Old 18th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Thanks @jgimmi ! thanks @adamk !
In fact , it's still set to 2 and yet X refuses to start
Xorg.0.log :
Code:
[   175.527] (--) checkDevMem: using aperture driver /dev/xf86
[   175.566] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
[   175.578] 
X.Org X Server 1.12.2
Release Date: 2012-05-29
[   175.579] X Protocol Version 11, Revision 0
[   175.579] Build Operating System: OpenBSD 5.1 i386 
[   175.579] Current Operating System: OpenBSD midgarth.my.domain 5.1 GENERIC.MP#277 i386
[   175.579] Build Date: 12 June 2012  07:32:36PM
[   175.579]  
[   175.579] Current version of pixman: 0.24.4
[   175.579] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   175.579] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   175.580] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 19 01:46:34 2012
[   175.580] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[   175.580] (==) No Layout section.  Using the first Screen section.
[   175.580] (==) No screen section available. Using defaults.
[   175.581] (**) |-->Screen "Default Screen Section" (0)
[   175.581] (**) |   |-->Monitor "<default monitor>"
[   175.581] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   175.581] (==) Disabling SIGIO handlers for input devices
[   175.581] (==) Automatically adding devices
[   175.581] (==) Automatically enabling devices
[   175.582] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[   175.582] (==) ModulePath set to "/usr/X11R6/lib/modules"
[   175.582] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[   175.582] (II) Loader magic: 0x3c021020
[   175.582] (II) Module ABI versions:
[   175.582] 	X.Org ANSI C Emulation: 0.4
[   175.582] 	X.Org Video Driver: 12.0
[   175.582] 	X.Org XInput driver : 16.0
[   175.582] 	X.Org Server Extension : 6.0
[   175.582] (--) PCI:*(0:1:0:0) 10de:01d7:1025:0090 rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd0000000/16777216
[   175.582] (II) LoadModule: "extmod"
[   175.585] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[   175.585] (II) Module extmod: vendor="X.Org Foundation"
[   175.585] 	compiled for 1.12.2, module version = 1.0.0
[   175.585] 	Module class: X.Org Server Extension
[   175.585] 	ABI class: X.Org Server Extension, version 6.0
[   175.585] (II) Loading extension MIT-SCREEN-SAVER
[   175.585] (II) Loading extension XFree86-VidModeExtension
[   175.585] (II) Loading extension XFree86-DGA
[   175.585] (II) Loading extension DPMS
[   175.586] (II) Loading extension XVideo
[   175.586] (II) Loading extension XVideo-MotionCompensation
[   175.586] (II) Loading extension X-Resource
[   175.586] (II) LoadModule: "dbe"
[   175.588] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[   175.588] (II) Module dbe: vendor="X.Org Foundation"
[   175.588] 	compiled for 1.12.2, module version = 1.0.0
[   175.588] 	Module class: X.Org Server Extension
[   175.588] 	ABI class: X.Org Server Extension, version 6.0
[   175.588] (II) Loading extension DOUBLE-BUFFER
[   175.588] (II) LoadModule: "glx"
[   175.591] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[   175.591] (II) Module glx: vendor="X.Org Foundation"
[   175.591] 	compiled for 1.12.2, module version = 1.0.0
[   175.591] 	ABI class: X.Org Server Extension, version 6.0
[   175.591] (==) AIGLX enabled
[   175.591] (II) Loading extension GLX
[   175.591] (II) LoadModule: "record"
[   175.594] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[   175.594] (II) Module record: vendor="X.Org Foundation"
[   175.594] 	compiled for 1.12.2, module version = 1.13.0
[   175.594] 	Module class: X.Org Server Extension
[   175.594] 	ABI class: X.Org Server Extension, version 6.0
[   175.594] (II) Loading extension RECORD
[   175.594] (II) LoadModule: "dri"
[   175.596] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[   175.597] (II) Module dri: vendor="X.Org Foundation"
[   175.597] 	compiled for 1.12.2, module version = 1.0.0
[   175.597] 	ABI class: X.Org Server Extension, version 6.0
[   175.597] (II) Loading extension XFree86-DRI
[   175.597] (II) LoadModule: "dri2"
[   175.599] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[   175.600] (II) Module dri2: vendor="X.Org Foundation"
[   175.600] 	compiled for 1.12.2, module version = 1.2.0
[   175.600] 	ABI class: X.Org Server Extension, version 6.0
[   175.600] (II) Loading extension DRI2
[   175.600] (==) Matched nv as autoconfigured driver 0
[   175.600] (==) Matched vesa as autoconfigured driver 1
[   175.600] (==) Assigned the driver to the xf86ConfigLayout
[   175.600] (II) LoadModule: "nv"
[   175.601] (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so
[   175.602] (II) Module nv: vendor="X.Org Foundation"
[   175.602] 	compiled for 1.12.2, module version = 2.1.18
[   175.602] 	Module class: X.Org Video Driver
[   175.602] 	ABI class: X.Org Video Driver, version 12.0
[   175.602] (II) LoadModule: "vesa"
[   175.604] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[   175.604] (II) Module vesa: vendor="X.Org Foundation"
[   175.604] 	compiled for 1.12.2, module version = 2.3.1
[   175.604] 	Module class: X.Org Video Driver
[   175.604] 	ABI class: X.Org Video Driver, version 12.0
[   175.604] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
	Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
	GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
	GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
	Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
	GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
	GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
	GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
	GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
	GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
	GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
	GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
	Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
	GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
	Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
	GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
	GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
	GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
	GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
	GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
	Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
	GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
	GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
	GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
	GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
	GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
	Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
	Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
	GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
	Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
	Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
	GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
	GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
	GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
	GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
	GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
	GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
	Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
	Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
	GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
	GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
	GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
	GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
	GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
	GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
	GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
	GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
	GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
	Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
	Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
	GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
	GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
	Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
	Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
	Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
	GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
	nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
	GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
	GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
	GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
	GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
	GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
	ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
	GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
	GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
	GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
	GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
	NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
	GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
	Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
	GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
	GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
	GeForce GTS 360M, Quadro FX 1800M
[   175.610] (II) VESA: driver for VESA chipsets: vesa
[   175.610] (--) NV: Found NVIDIA GeForce Go 7300 at 01@00:00:0
[   175.610] (WW) Falling back to old probe method for vesa
[   175.610] (II) Loading sub module "int10"
[   175.610] (II) LoadModule: "int10"
[   175.614] (II) Loading /usr/X11R6/lib/modules/libint10.so
[   175.614] (II) Module int10: vendor="X.Org Foundation"
[   175.614] 	compiled for 1.12.2, module version = 1.0.0
[   175.614] 	ABI class: X.Org Video Driver, version 12.0
[   175.614] (II) NV(0): Initializing int10
[   175.615] (II) NV(0): Primary V_BIOS segment is: 0xc000
[   175.615] (--) NV(0): Chipset: "GeForce Go 7300"
[   175.616] (II) NV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   175.616] (==) NV(0): Depth 24, (--) framebuffer bpp 32
[   175.616] (==) NV(0): RGB weight 888
[   175.616] (==) NV(0): Default visual is TrueColor
[   175.616] (II) Loading sub module "vgahw"
[   175.616] (II) LoadModule: "vgahw"
[   175.619] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[   175.619] (II) Module vgahw: vendor="X.Org Foundation"
[   175.620] 	compiled for 1.12.2, module version = 0.1.0
[   175.620] 	ABI class: X.Org Video Driver, version 12.0
[   175.620] (==) NV(0): Using HW cursor
[   175.620] (--) NV(0): Linear framebuffer at 0xC0000000
[   175.620] (--) NV(0): MMIO registers at 0xD1000000
[   175.620] (II) Loading sub module "i2c"
[   175.620] (II) LoadModule: "i2c"
[   175.620] (II) Module "i2c" already built-in
[   175.620] (II) Loading sub module "ddc"
[   175.620] (II) LoadModule: "ddc"
[   175.620] (II) Module "ddc" already built-in
[   175.620] (II) NV(0): I2C bus "DDC" initialized.
[   175.620] (II) NV(0): Probing for analog device on output A...
[   175.660] (--) NV(0):   ...can't find one
[   175.660] (II) NV(0): Probing for analog device on output B...
[   175.700] (--) NV(0):   ...can't find one
[   175.700] (II) NV(0): Probing for EDID on I2C bus A...
[   175.700] (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
[   175.703] (II) NV(0):   ... none found
[   175.703] (II) NV(0): Probing for EDID on I2C bus B...
[   175.707] (II) NV(0):   ... none found
[   175.707] (--) NV(0): CRTC 0 is currently programmed for DFP
[   175.707] (II) NV(0): Using DFP on CRTC 0
[   175.707] (--) NV(0): Panel size is 1280 x 800
[   175.707] (II) NV(0): NOTE: This driver cannot reconfigure the BIOS-programmed size.
[   175.707] (II) NV(0): These dimensions will be used as the panel size for mode validation.
[   175.707] (II) NV(0): Panel is LVDS
[   175.707] (--) NV(0): VideoRAM: 131072 kBytes
[   175.707] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[   175.707] (II) NV(0): <default monitor>: Using hsync range of 0.00-49.31 kHz
[   175.707] (II) NV(0): <default monitor>: Using vrefresh range of 0.00-59.91 Hz
[   175.707] (WW) NV(0): Unable to estimate virtual size
[   175.707] (II) NV(0): Clock range:  12.00 to 400.00 MHz
[   175.707] (II) NV(0): Not using default mode "640x350" (vrefresh out of range)
[   175.707] (II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "640x400" (vrefresh out of range)
[   175.708] (II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "720x400" (vrefresh out of range)
[   175.708] (II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "640x480" (vrefresh out of range)
[   175.708] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "640x480" (vrefresh out of range)
[   175.708] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "640x480" (vrefresh out of range)
[   175.708] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "800x600" (vrefresh out of range)
[   175.708] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "800x600" (vrefresh out of range)
[   175.708] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[   175.708] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[   175.708] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[   175.708] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[   175.708] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1152x864" (exceeds panel dimensions)
[   175.708] (II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1280x960" (exceeds panel dimensions)
[   175.708] (II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1280x960" (exceeds panel dimensions)
[   175.708] (II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[   175.708] (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[   175.708] (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[   175.708] (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[   175.708] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[   175.708] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "832x624" (vrefresh out of range)
[   175.709] (II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   175.709] (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[   175.709] (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   175.709] (--) NV(0): Virtual size is 1280x800 (pitch 1280)
[   175.709] (**) NV(0): *Driver mode "1280x800": 71.0 MHz, 49.3 kHz, 59.9 Hz
[   175.709] (II) NV(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz ez)
[   175.709] (**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[   175.710] (II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz zd)
[   175.710] (**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[   175.710] (II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz zd)
[   175.710] (**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[   175.710] (II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz zd)
[   175.710] (**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[   175.710] (II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz zd)
[   175.710] (==) NV(0): DPI set to (96, 96)
[   175.710] (II) Loading sub module "fb"
[   175.710] (II) LoadModule: "fb"
[   175.713] (II) Loading /usr/X11R6/lib/modules/libfb.so
[   175.714] (II) Module fb: vendor="X.Org Foundation"
[   175.714] 	compiled for 1.12.2, module version = 1.0.0
[   175.714] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   175.714] (II) Loading sub module "xaa"
[   175.714] (II) LoadModule: "xaa"
[   175.718] (II) Loading /usr/X11R6/lib/modules/libxaa.so
[   175.720] (II) Module xaa: vendor="X.Org Foundation"
[   175.720] 	compiled for 1.12.2, module version = 1.2.1
[   175.720] 	ABI class: X.Org Video Driver, version 12.0
[   175.720] (II) Loading sub module "ramdac"
[   175.720] (II) LoadModule: "ramdac"
[   175.720] (II) Module "ramdac" already built-in
[   175.720] (II) UnloadModule: "vesa"
[   175.720] (II) Unloading vesa
[   175.720] (--) Depth 24 pixmap format is 32 bpp
[   175.725] Segmentation fault at address 0x0
[   175.726] 
Fatal server error:
[   175.726] Caught signal 11 (Segmentation fault). Server aborting
[   175.726] 
[   175.726] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   175.726] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   175.726] 
[   175.727] Server terminated with error (1). Closing log file.
Reply With Quote
  #9   (View Single Post)  
Old 18th June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,687
Thanked 214 Times in 189 Posts
Default

Code:
[   175.725] Segmentation fault at address 0x0
[   175.726] 
Fatal server error:
[   175.726] Caught signal 11 (Segmentation fault). Server aborting
Was the system rebooted with aperture set to 2 before you attempted to start X?

If the answer is no, that was your problem.

If you are sure you had your /etc files configured correctly, consider a newer snapshot. At this moment, there is a June 18 snapshot that included a Xenocara fileset updates.
Reply With Quote
Old 19th June 2012
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,687
Thanked 214 Times in 189 Posts
Default

To be clear, @daemonfowl, if you edited the file and set the sysctl from 1 to 2, then started X without rebooting, X would not function.

  • Editing /etc/sysctl.conf does not change any active settings, only the contents of the file.
  • That file is only read by rc(8) at boot time.
  • While many sysctl settings may be set at any time via the sysctl(8) command, the aperture sysctl can only be set when the securelevel is set at 0 or below ... which means, for normal systems, only during boot.
Reply With Quote
Old 19th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Yes I got it now.
Thank you so much @jgimmi !! for your helpful hints and simplified clarification and sorry for showing silly interaction.I'll get better with time.
Teacher jgimmi , please accept this orphic token : Marooned by Pink Floyd
http://www.youtube.com/watch?v=NtbunQgEi_0
Two wonders in my MicroCosm : {pink floyd U OpenBSD} .. I'm upgrading to the newest snapshots & Merry Chrismas to my machine!
Reply With Quote
Old 19th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Done .All is well :-)
Code:
kern.version=OpenBSD 5.1-current (GENERIC.MP) #278: Mon Jun 18 05:40:27 MDT 2012
    todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
Reply With Quote
Old 19th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Firefox now starts faster than it used to & Synaptic touchpad mouse seems a little bit slower
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
a segmentation fault line daemonfowl OpenBSD General 3 16th June 2012 08:13 PM
Segmentation fault error139 delboy FreeBSD Ports and Packages 8 9th July 2009 06:32 PM
Segmentation fault (11) - Apache ijk FreeBSD Ports and Packages 16 15th July 2008 11:04 AM
Segmentation fault ccc FreeBSD General 8 28th June 2008 02:15 PM
MySQL C library - segmentation fault on mysql_select_db() when using CC optimisation gor OpenBSD Packages and Ports 7 10th June 2008 11:42 PM


All times are GMT. The time now is 10:31 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick