DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 21st August 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default xorg.conf doesn't exist & I want to keep record of my working Xorg setting

Hi BSD Monks !!

I don't have a xorg.conf file but I do want to keep record of my working settings for X .. lest I should regret it in the future when things change (as happened with iMac as I had X working but didn't backup settings and after an upgrade lost X & the way back home :-) )

How would I ? without having to generate a xorg.conf ..
Reply With Quote
  #2   (View Single Post)  
Old 21st August 2012
denta denta is offline
Fdisk Soldier
 
Join Date: Nov 2009
Posts: 73
Thanked 0 Times in 0 Posts
Default

So basically, you want to create a xorg.conf file by hand, but with the same contents as one that is automatically generated?
Reply With Quote
  #3   (View Single Post)  
Old 21st August 2012
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,141
Thanked 182 Times in 149 Posts
Default

Something like
Code:
$ mail -s 'My /var/log/Xorg.0.log file' daem.on.fowl@gmail.com </var/log/Xorg.0.log
could possibly help you to create one when needed
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #4   (View Single Post)  
Old 21st August 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Hi denta ! Hi j65nko !
Thanks very much !
I mean when X just works and you don't have a xorg.conf anywhere in your system.. where are those X settings stored for use ? then I'd take note and keep in case of need (eg. upgrade after upgrade the OS may use newer xorg that no longer support some legacy hardware .. when you lose X you find no working xorg.conf to bring it back.)
Reply With Quote
  #5   (View Single Post)  
Old 21st August 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

j65nko , do you mean this is it ? an actual xorg.conf equivalent ?
Code:
From tetsuji@fuji.my.domain Wed Aug 22 05:50:02 2012
Return-Path: tetsuji@fuji.my.domain
Delivered-To: tetsuji@fuji.my.domain
Received: from localhost (1000@localhost [IPv6:::1])
	by fuji.my.domain (OpenSMTPD) with ESMTP id db391848
	for <tetsuji@fuji.my.domain>; Wed, 22 Aug 2012 05:50:02 +0900 (JST)
From: tetsuji <tetsuji@fuji.my.domain>
Date: Wed, 22 Aug 2012 05:50:01 +0900 (JST)
Message-Id: <956096719.enqueue@fuji.my.domain>
User-Agent: OpenSMTPD enqueuer (Demoosh)
To: tetsuji@fuji.my.domain
Subject: My /var/log/Xorg.0.log file
Status: RO

[    98.908] (--) checkDevMem: using aperture driver /dev/xf86
[    98.948] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
[    99.029] 
X.Org X Server 1.12.2
Release Date: 2012-05-29
[    99.029] X Protocol Version 11, Revision 0
[    99.029] Build Operating System: OpenBSD 5.2 i386 
[    99.029] Current Operating System: OpenBSD fuji.my.domain 5.2 GENERIC.MP#336 i386
[    99.030] Build Date: 22 July 2012  10:21:16PM
[    99.030]  
[    99.030] Current version of pixman: 0.24.4
[    99.030] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    99.030] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    99.030] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 22 04:20:02 2012
[    99.129] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[    99.148] (==) No Layout section.  Using the first Screen section.
[    99.148] (==) No screen section available. Using defaults.
[    99.148] (**) |-->Screen "Default Screen Section" (0)
[    99.148] (**) |   |-->Monitor "<default monitor>"
[    99.149] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    99.149] (==) Disabling SIGIO handlers for input devices
[    99.149] (==) Automatically adding devices
[    99.149] (==) Automatically enabling devices
[    99.302] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[    99.302] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    99.302] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    99.316] (II) Loader magic: 0x3c021020
[    99.316] (II) Module ABI versions:
[    99.316] 	X.Org ANSI C Emulation: 0.4
[    99.316] 	X.Org Video Driver: 12.0
[    99.316] 	X.Org XInput driver : 16.0
[    99.316] 	X.Org Server Extension : 6.0
[    99.320] (--) PCI:*(0:1:0:0) 10de:01d7:1025:0090 rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd0000000/16777216
[    99.320] (II) LoadModule: "extmod"
[    99.357] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[    99.364] (II) Module extmod: vendor="X.Org Foundation"
[    99.364] 	compiled for 1.12.2, module version = 1.0.0
[    99.364] 	Module class: X.Org Server Extension
[    99.364] 	ABI class: X.Org Server Extension, version 6.0
[    99.364] (II) Loading extension MIT-SCREEN-SAVER
[    99.364] (II) Loading extension XFree86-VidModeExtension
[    99.364] (II) Loading extension XFree86-DGA
[    99.365] (II) Loading extension DPMS
[    99.365] (II) Loading extension XVideo
[    99.365] (II) Loading extension XVideo-MotionCompensation
[    99.365] (II) Loading extension X-Resource
[    99.365] (II) LoadModule: "dbe"
[    99.367] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[    99.368] (II) Module dbe: vendor="X.Org Foundation"
[    99.368] 	compiled for 1.12.2, module version = 1.0.0
[    99.368] 	Module class: X.Org Server Extension
[    99.368] 	ABI class: X.Org Server Extension, version 6.0
[    99.368] (II) Loading extension DOUBLE-BUFFER
[    99.368] (II) LoadModule: "glx"
[    99.370] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    99.378] (II) Module glx: vendor="X.Org Foundation"
[    99.378] 	compiled for 1.12.2, module version = 1.0.0
[    99.378] 	ABI class: X.Org Server Extension, version 6.0
[    99.379] (==) AIGLX enabled
[    99.379] (II) Loading extension GLX
[    99.379] (II) LoadModule: "record"
[    99.381] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[    99.382] (II) Module record: vendor="X.Org Foundation"
[    99.382] 	compiled for 1.12.2, module version = 1.13.0
[    99.382] 	Module class: X.Org Server Extension
[    99.382] 	ABI class: X.Org Server Extension, version 6.0
[    99.382] (II) Loading extension RECORD
[    99.382] (II) LoadModule: "dri"
[    99.384] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[    99.403] (II) Module dri: vendor="X.Org Foundation"
[    99.403] 	compiled for 1.12.2, module version = 1.0.0
[    99.403] 	ABI class: X.Org Server Extension, version 6.0
[    99.403] (II) Loading extension XFree86-DRI
[    99.404] (II) LoadModule: "dri2"
[    99.406] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[    99.406] (II) Module dri2: vendor="X.Org Foundation"
[    99.407] 	compiled for 1.12.2, module version = 1.2.0
[    99.407] 	ABI class: X.Org Server Extension, version 6.0
[    99.407] (II) Loading extension DRI2
[    99.407] (==) Matched nv as autoconfigured driver 0
[    99.407] (==) Matched vesa as autoconfigured driver 1
[    99.407] (==) Assigned the driver to the xf86ConfigLayout
[    99.407] (II) LoadModule: "nv"
[    99.408] (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so
[    99.458] (II) Module nv: vendor="X.Org Foundation"
[    99.458] 	compiled for 1.12.2, module version = 2.1.18
[    99.458] 	Module class: X.Org Video Driver
[    99.458] 	ABI class: X.Org Video Driver, version 12.0
[    99.458] (II) LoadModule: "vesa"
[    99.460] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[    99.476] (II) Module vesa: vendor="X.Org Foundation"
[    99.476] 	compiled for 1.12.2, module version = 2.3.1
[    99.476] 	Module class: X.Org Video Driver
[    99.476] 	ABI class: X.Org Video Driver, version 12.0
[    99.476] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
	Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
	GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
	GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
	Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
	GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
	GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
	GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
	GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
	GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
	GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
	GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
	Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
	GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
	Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
	GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
	GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
	GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
	GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
	GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
	Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
	GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
	GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
	GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
	GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
	GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
	Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
	Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
	GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
	Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
	Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
	GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
	GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
	GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
	GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
	GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
	GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
	Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
	Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
	GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
	GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
	GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
	GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
	GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
	GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
	GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
	GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
	GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
	Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
	Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
	GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
	GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
	Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
	Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
	Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
	GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
	nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
	GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
	GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
	GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
	GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
	GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
	ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
	GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
	GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
	GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
	GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
	NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
	GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
	Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
	GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
	GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
	GeForce GTS 360M, Quadro FX 1800M
[    99.482] (II) VESA: driver for VESA chipsets: vesa
[    99.482] (--) NV: Found NVIDIA GeForce Go 7300 at 01@00:00:0
[    99.482] (WW) Falling back to old probe method for vesa
[    99.483] (II) Loading sub module "int10"
[    99.483] (II) LoadModule: "int10"
[    99.500] (II) Loading /usr/X11R6/lib/modules/libint10.so
[    99.514] (II) Module int10: vendor="X.Org Foundation"
[    99.514] 	compiled for 1.12.2, module version = 1.0.0
[    99.514] 	ABI class: X.Org Video Driver, version 12.0
[    99.514] (II) NV(0): Initializing int10
[    99.516] (II) NV(0): Primary V_BIOS segment is: 0xc000
[    99.516] (--) NV(0): Chipset: "GeForce Go 7300"
[    99.516] (II) NV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    99.516] (==) NV(0): Depth 24, (--) framebuffer bpp 32
[    99.516] (==) NV(0): RGB weight 888
[    99.516] (==) NV(0): Default visual is TrueColor
[    99.516] (II) Loading sub module "vgahw"
[    99.516] (II) LoadModule: "vgahw"
[    99.519] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[    99.520] (II) Module vgahw: vendor="X.Org Foundation"
[    99.520] 	compiled for 1.12.2, module version = 0.1.0
[    99.520] 	ABI class: X.Org Video Driver, version 12.0
[    99.521] (==) NV(0): Using HW cursor
[    99.521] (--) NV(0): Linear framebuffer at 0xC0000000
[    99.521] (--) NV(0): MMIO registers at 0xD1000000
[    99.521] (II) Loading sub module "i2c"
[    99.521] (II) LoadModule: "i2c"
[    99.521] (II) Module "i2c" already built-in
[    99.521] (II) Loading sub module "ddc"
[    99.521] (II) LoadModule: "ddc"
[    99.521] (II) Module "ddc" already built-in
[    99.526] (II) NV(0): I2C bus "DDC" initialized.
[    99.526] (II) NV(0): Probing for analog device on output A...
[    99.560] (--) NV(0):   ...can't find one
[    99.560] (II) NV(0): Probing for analog device on output B...
[    99.600] (--) NV(0):   ...can't find one
[    99.600] (II) NV(0): Probing for EDID on I2C bus A...
[    99.615] (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
[    99.618] (II) NV(0):   ... none found
[    99.618] (II) NV(0): Probing for EDID on I2C bus B...
[    99.622] (II) NV(0):   ... none found
[    99.622] (--) NV(0): CRTC 0 is currently programmed for DFP
[    99.622] (II) NV(0): Using DFP on CRTC 0
[    99.622] (--) NV(0): Panel size is 1280 x 800
[    99.622] (II) NV(0): NOTE: This driver cannot reconfigure the BIOS-programmed size.
[    99.622] (II) NV(0): These dimensions will be used as the panel size for mode validation.
[    99.622] (II) NV(0): Panel is LVDS
[    99.622] (--) NV(0): VideoRAM: 131072 kBytes
[    99.622] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[    99.630] (II) NV(0): <default monitor>: Using hsync range of 0.00-49.31 kHz
[    99.630] (II) NV(0): <default monitor>: Using vrefresh range of 0.00-59.91 Hz
[    99.630] (WW) NV(0): Unable to estimate virtual size
[    99.630] (II) NV(0): Clock range:  12.00 to 400.00 MHz
[    99.630] (II) NV(0): Not using default mode "640x350" (vrefresh out of range)
[    99.630] (II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[    99.630] (II) NV(0): Not using default mode "640x400" (vrefresh out of range)
[    99.630] (II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[    99.630] (II) NV(0): Not using default mode "720x400" (vrefresh out of range)
[    99.631] (II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "640x480" (vrefresh out of range)
[    99.631] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "640x480" (vrefresh out of range)
[    99.631] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "640x480" (vrefresh out of range)
[    99.631] (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "800x600" (vrefresh out of range)
[    99.631] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "800x600" (vrefresh out of range)
[    99.631] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[    99.631] (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[    99.631] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[    99.631] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[    99.631] (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1152x864" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1280x960" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1280x960" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[    99.631] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    99.631] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "832x624" (vrefresh out of range)
[    99.632] (II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[    99.632] (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[    99.632] (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[    99.632] (--) NV(0): Virtual size is 1280x800 (pitch 1280)
[    99.632] (**) NV(0): *Driver mode "1280x800": 71.0 MHz, 49.3 kHz, 59.9 Hz
[    99.632] (II) NV(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz ez)
[    99.632] (**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[    99.632] (II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz zd)
[    99.632] (**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[    99.633] (II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz zd)
[    99.633] (**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[    99.633] (II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz zd)
[    99.633] (**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[    99.633] (II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz zd)
[    99.633] (==) NV(0): DPI set to (96, 96)
[    99.633] (II) Loading sub module "fb"
[    99.633] (II) LoadModule: "fb"
[    99.636] (II) Loading /usr/X11R6/lib/modules/libfb.so
[    99.653] (II) Module fb: vendor="X.Org Foundation"
[    99.653] 	compiled for 1.12.2, module version = 1.0.0
[    99.653] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    99.653] (II) Loading sub module "xaa"
[    99.653] (II) LoadModule: "xaa"
[    99.656] (II) Loading /usr/X11R6/lib/modules/libxaa.so
[    99.680] (II) Module xaa: vendor="X.Org Foundation"
[    99.680] 	compiled for 1.12.2, module version = 1.2.1
[    99.680] 	ABI class: X.Org Video Driver, version 12.0
[    99.680] (II) Loading sub module "ramdac"
[    99.680] (II) LoadModule: "ramdac"
[    99.680] (II) Module "ramdac" already built-in
[    99.680] (II) UnloadModule: "vesa"
[    99.680] (II) Unloading vesa
[    99.681] (--) Depth 24 pixmap format is 32 bpp
[    99.943] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
[    99.943] 	Screen to screen bit blits
[    99.943] 	Solid filled rectangles
[    99.943] 	8x8 mono pattern filled rectangles
[    99.943] 	Indirect CPU to Screen color expansion
[    99.943] 	Solid Lines
[    99.943] 	Scanline Image Writes
[    99.944] 	Setting up tile and stipple cache:
[    99.945] 		32 128x128 slots
[    99.945] 		32 256x256 slots
[    99.945] 		16 512x512 slots
[    99.945] (==) NV(0): Backing store disabled
[    99.945] (==) NV(0): Silken mouse disabled
[    99.961] (==) NV(0): DPMS enabled
[    99.975] (==) RandR enabled
[    99.975] (II) Initializing built-in extension Generic Event Extension
[    99.975] (II) Initializing built-in extension SHAPE
[    99.975] (II) Initializing built-in extension MIT-SHM
[    99.975] (II) Initializing built-in extension XInputExtension
[    99.975] (II) Initializing built-in extension XTEST
[    99.975] (II) Initializing built-in extension BIG-REQUESTS
[    99.975] (II) Initializing built-in extension SYNC
[    99.975] (II) Initializing built-in extension XKEYBOARD
[    99.975] (II) Initializing built-in extension XC-MISC
[    99.975] (II) Initializing built-in extension SECURITY
[    99.975] (II) Initializing built-in extension XINERAMA
[    99.975] (II) Initializing built-in extension XFIXES
[    99.975] (II) Initializing built-in extension RENDER
[    99.975] (II) Initializing built-in extension RANDR
[    99.975] (II) Initializing built-in extension COMPOSITE
[    99.975] (II) Initializing built-in extension DAMAGE
[   100.022] (II) AIGLX: Screen 0 is not DRI2 capable
[   100.023] (II) AIGLX: Screen 0 is not DRI capable
[   100.211] (II) AIGLX: Loaded and initialized swrast
[   100.211] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   101.237] (II) config/wscons: checking input device /dev/wskbd
[   101.237] (II) wskbd: using layout us
[   101.237] (II) LoadModule: "kbd"
[   101.239] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[   101.261] (II) Module kbd: vendor="X.Org Foundation"
[   101.261] 	compiled for 1.12.2, module version = 1.6.1
[   101.261] 	Module class: X.Org XInput Driver
[   101.261] 	ABI class: X.Org XInput driver, version 16.0
[   101.261] (II) Using input driver 'kbd' for '/dev/wskbd'
[   101.261] (**) /dev/wskbd: always reports core events
[   101.261] (**) /dev/wskbd: always reports core events
[   101.261] (**) Option "Protocol" "standard"
[   101.261] (**) Option "XkbRules" "base"
[   101.261] (**) Option "XkbModel" "pc105"
[   101.261] (**) Option "XkbLayout" "us"
[   101.261] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[   101.689] (II) config/wscons: checking input device /dev/wsmouse0
[   101.689] (II) LoadModule: "synaptics"
[   101.692] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[   101.693] (II) Module synaptics: vendor="X.Org Foundation"
[   101.693] 	compiled for 1.12.2, module version = 1.6.2
[   101.693] 	Module class: X.Org XInput Driver
[   101.693] 	ABI class: X.Org XInput driver, version 16.0
[   101.693] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[   101.693] (**) /dev/wsmouse0: always reports core events
[   101.693] (**) Option "Device" "/dev/wsmouse0"
[   102.514] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution 65
[   102.514] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution 108
[   102.515] (**) /dev/wsmouse0: always reports core events
[   102.541] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7)
[   102.541] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5
[   102.541] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[   102.541] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.040
[   102.542] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[   102.542] (**) /dev/wsmouse0: (accel) acceleration profile 1
[   102.542] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[   102.542] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[   102.942] (II) config/wscons: checking input device /dev/wsmouse
[   102.942] (II) LoadModule: "ws"
[   102.945] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[   102.968] (II) Module ws: vendor="X.Org Foundation"
[   102.968] 	compiled for 1.12.2, module version = 1.3.0
[   102.968] 	Module class: X.Org XInput Driver
[   102.968] 	ABI class: X.Org XInput driver, version 16.0
[   102.968] (II) Using input driver 'ws' for '/dev/wsmouse'
[   102.968] (**) /dev/wsmouse: always reports core events
[   102.969] (II) ws: /dev/wsmouse: debuglevel 0
[   102.969] (**) Option "Device" "/dev/wsmouse"
[   102.969] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[   102.969] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[   102.969] (**) ws: /dev/wsmouse: associated screen: 0
[   102.969] (EE) ws: /dev/wsmouse: cannot open input device
[   102.969] (EE) PreInit returned 2 for "/dev/wsmouse"
[   102.969] (II) UnloadModule: "ws"
Reply With Quote
  #6   (View Single Post)  
Old 21st August 2012
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,141
Thanked 182 Times in 149 Posts
Default

No it is not an Xorg.conf equivalent., but it contains some pointers. Consult the OBSD FAQ how to create an Xorg.conf
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #7   (View Single Post)  
Old 21st August 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

you see j65nko, it doesn't answer my question but it's a very helpful tip , thanks ! :-)
I don't want to create a xorg.conf .. I rather need to learn about where the OS goes to look for suitable X settings to successfully start X.
Reply With Quote
  #8   (View Single Post)  
Old 21st August 2012
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,141
Thanked 182 Times in 149 Posts
Default

Maybe this helps
Code:
[    99.030] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #9   (View Single Post)  
Old 21st August 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Thanks j65nko !
So the OS probes hardware but just doesn't create a xorg.conf .. it does this each time xinit /startx are used .. right ?
Reply With Quote
Old 22nd August 2012
LeFrettchen's Avatar
LeFrettchen LeFrettchen is offline
Marveled user
 
Join Date: Aug 2012
Location: Bronvaux, France
Posts: 107
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by J65nko View Post
Consult the OBSD FAQ how to create an Xorg.conf
Quote:
Originally Posted by daemonfowl View Post
you see j65nko, it doesn't answer my question but it's a very helpful tip , thanks ! :-)
I don't want to create a xorg.conf ...
Consult the OBSD FAQ = you'll learn how and WHERE to create the xorg.conf

Quote:
Originally Posted by daemonfowl View Post
Thanks j65nko !
So the OS probes hardware but just doesn't create a xorg.conf .. it does this each time xinit /startx are used .. right ?
It depends of the computer : X may need xorg.conf, or not.
My computer (OpenBSD 5.1) need a /etc/X11/xorg.conf, just can't launch X without it.
Reply With Quote
Old 22nd August 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default

Thank you LeFrettchen !
What I know is that as root, 'Xorg -configure' then Xorg -config xorg.conf.new then copy to /etc/X11 for the OS to read when launching X is all.
I have a habit to just use xinit /path/to/some/window/manager .. at will or need :-) and I never had to Xorg -configure except on iMac
I'm still willing to know what executables or files OpenBSD uses to launch X in the absence of a xorg.conf (my case) .. so it probes hardware and uses the right settings.
Reply With Quote
Old 23rd August 2012
bmk1st bmk1st is offline
Port Guard
 
Join Date: May 2008
Posts: 25
Thanked 0 Times in 0 Posts
Default

Sometimes, a solution to the problem has to come from a trial and error method.

Do you know your computer's hardware specifications? That's all you need to know to edit Xorg.conf. That's how people did in their days before Xorg got smart on detecting hardware in order to run X Windows.
Reply With Quote
Old 27th August 2012
LeFrettchen's Avatar
LeFrettchen LeFrettchen is offline
Marveled user
 
Join Date: Aug 2012
Location: Bronvaux, France
Posts: 107
Thanked 0 Times in 0 Posts
Default

I tried to install OpenBSD 5.1 with VirtualBox on my iMac yesterday.
Needs a xorg.conf file.

Tried to install OpenBSD 5.1 on an old Pentium II.
Works without xorg.conf file.

Seems that a VM always needs a conf file.
But maybe it's possible to change the VM configuration, didn't try.
Reply With Quote
Old 27th August 2012
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,878
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by LeFrettchen View Post
I tried to install OpenBSD 5.1 with VirtualBox on my iMac yesterday.
LeFrettchen, the feature of this site which most members use (some exclusively...) is the archives of previous discussions. As such, we attempt to keep threads focused on a single topic, as directed by the person starting the thread. This simplifies searching.

This topic is covered in the forum rules.

If you wish to change the subject to discuss X configuration while using VirtualBox, we invite you to start a new thread.
Reply With Quote
Old 28th August 2012
LeFrettchen's Avatar
LeFrettchen LeFrettchen is offline
Marveled user
 
Join Date: Aug 2012
Location: Bronvaux, France
Posts: 107
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by ocicat View Post
If you wish to change the subject (...)
Well, no, I don't want to change the subject.
Sorry if you misanderstood me.


But I just noticed daemonfowl tried Puffy using a iMac :
Quote:
Originally Posted by daemonfowl View Post
(...)I never had to Xorg -configure except on iMac
So I though maybe he's got a Puffy computer and a iMac with a Puffy VM.
And indeed, in this case, a new thread would be better.

But you're right, sorry for the mess : I should have asked daemonfowl his configuration first (using a PM).
__________________
In case of emergency

Last edited by LeFrettchen; 28th August 2012 at 01:29 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
xorg.conf with 1440x900 openBSDheart OpenBSD General 8 12th June 2012 07:06 PM
xorg.conf is not necessary ? sw2wolf OpenBSD General 5 1st June 2012 02:42 AM
xorg.conf overriden? delboy FreeBSD General 4 3rd February 2010 10:37 AM
Generate xorg.conf.new and black screen aleunix OpenBSD Packages and Ports 2 4th June 2008 10:49 AM
Xorg.conf w/Matrox g550 agp WeakSauceIII OpenBSD General 4 20th May 2008 08:27 AM


All times are GMT. The time now is 11:16 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick