DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 24th February 2013
ripe ripe is offline
New User
 
Join Date: Feb 2013
Location: France
Posts: 8
Thanked 0 Times in 0 Posts
Default Video card instead of sound card

Hi,

My problem is : i have no sound in openbsd 5.2
I think i find the problem but i am not sure : my system is using my video card instead of my sound card , here is what i get :

$ dmesg | grep -i audio
azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 3600 HD Audio" rev 0x00: apic 3 int 1

At least i am connected to my video card on motherboard (realtek).

Any helps is welcome, thank you.

ripe
Reply With Quote
  #2   (View Single Post)  
Old 24th February 2013
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,140
Thanked 182 Times in 149 Posts
Default

The dmesg output of my computer says:
Code:
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: apic 2 int 22
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auvia0
That is why audioctl(1) gives the following output:
Code:
$ audioctl | head -10
name=VIA VT8233
version=
config=auvia
encodings=ulinear:8:1:1,mulaw:8:1:1*,alaw:8:1:1*,slinear:8:1:1*,
slinear_le:16:2:1,ulinear_le:16:2:1*,slinear_be:16:2:1*,ulinear_be:16:2:1*
properties=full_duplex,mmap,independent
full_duplex=0
fullduplex=0
blocksize=9600
hiwat=6
lowat=4
The azalia(4) has the following in the BUGS section:

Code:
BUGS
     This driver does not support codecs that are intended for HDMI or
     DisplayPort connectivity.
I am not really a sound expert on OpenBSD, but this could explain why you don't have that audio0 at auvia0 line in your dmesg output.
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #3   (View Single Post)  
Old 26th February 2013
ripe ripe is offline
New User
 
Join Date: Feb 2013
Location: France
Posts: 8
Thanked 0 Times in 0 Posts
Default

Thank you J65nko.
What can i do ? I mean how to change to get the right sound card ?

My dmesg :
Code:
# dmesg
OpenBSD 5.2 (GENERIC) #278: Wed Aug  1 10:04:16 MDT 2012
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 3400+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.99 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,SSE3,CX16,LAHF
real mem  = 2145906688 (2046MB)
avail mem = 2099998720 (2002MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/27/07, BIOS32 rev. 0 @ 0xfa4f0, SMBIOS rev. 2.4 @ 0xf0000 (36 entries)
bios0: vendor Phoenix Technologies, LTD version "V1.4" date 06/27/2007
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7253
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC
acpi0: wakeup devices PCI0(S5) SATA(S1) USB1(S1) USB2(S1) USB3(S1) USB4(S1) EHCI(S1) AC97(S5) MC97(S5) LAN1(S5) PEXG(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PE5C(S5) PE6C(S5) AZAC(S5) P2PB(S5) UAR1(S5) PS2M(S5) PS2K(S5) PE5C(S5) PE6C(S5) AZAC(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 220MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfecc0000, version 3, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEXG)
acpiprt2 at acpi0: bus 3 (PEX0)
acpiprt3 at acpi0: bus 4 (P2PB)
acpiprt4 at acpi0: bus 128 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xfa00 0xd0000/0x8000! 0xd8000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA K8M890 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xd0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA K8M890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M890 Host" rev 0x00
"VIA K8M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7 "VIA K8M890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00: apic 3 int 3
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon HD 3650" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 3 int 0
drm0 at radeondrm0
azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 3600 HD Audio" rev 0x00: apic 3 int 1
azalia0: no supported codecs
ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00: apic 3 int 7
pci3 at ppb2 bus 3
pciide0 at pci0 dev 15 function 0 "VIA VT8237A SATA" rev 0x80: DMA
pciide0: using apic 2 int 21 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <WDC WD400BB-23DEA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide1:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-ROM DVD-115, 1.12> ATAPI 5/cdrom removable
atapiscsi1 at pciide1 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S162A, TS02> ATAPI 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
cd1(pciide1:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xa0: apic 2 int 20
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0xa0: apic 2 int 22
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xa0: apic 2 int 21
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0xa0: apic 2 int 23
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237A ISA" rev 0x00: SMI
iic0 at viapm0
iic0: addr 0x2f 00=c2 01=0f 02=00 03=00 04=07 05=00 06=18 07=00 08=00 14=14 15=62 16=02 17=05 words 00=c2ff 01=0fff 02=00ff 03=00ff 04=07ff 05=00ff 06=18ff 07=00ff
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: apic 2 int 23, address 00:19:db:c1:43:89
rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1
pchb7 at pci0 dev 19 function 0 "VIA VT8237A PCI-PCI" rev 0x00
ppb3 at pci0 dev 19 function 1 "VIA VT8237A PCI-PCI" rev 0x00
pci4 at ppb3 bus 4
xl0 at pci4 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 2 int 18, address 00:0a:5e:1d:fc:5f
exphy0 at xl0 phy 24: 3Com internal media interface
pchb8 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb9 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb10 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev DH-F2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x68
lm1 at wbsio0 port 0x290/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Tsunami product 0x1166" rev 1.10/2.70 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (679f9df4c06db557.a) swap on wd0b dump on wd0b
umass0 at uhub0 port 1 configuration 1 interface 0 "JetFlash Mass Storage Device" rev 2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd0 at scsibus4 targ 1 lun 0: <JetFlash, Transcend 16GB, 1100> SCSI2 0/direct removable serial.85641000UR937V2F6VX7
sd0: 15474MB, 512 bytes/sector, 31690752 sectors

Last edited by ocicat; 26th February 2013 at 09:33 AM. Reason: Please use [code] & [/code] tags when posting command output.
Reply With Quote
  #4   (View Single Post)  
Old 26th February 2013
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,140
Thanked 182 Times in 149 Posts
Default

Code:
azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 3600 HD Audio" rev 0x00: apic 3 int 1
azalia0: no supported codecs
This is the problem

From https://en.wikipedia.org/wiki/Codec:
Quote:
A codec is a device or computer program capable of encoding or decoding a digital data stream or signal.[1][2][3] The word codec is a portmanteau of "coder-decoder" or, less commonly, "compressor-decompressor".

[snip]

An audio codec converts analog audio signals into digital signals for transmission or storage. A receiving device then converts the digital signals back to analog using an audio decompressor, for playback. An example of this is the codecs used in the sound cards of personal computers.
I have to go to work now, so I don't have the time now to see whether there are recent changes in the azalia source code that hint at codecs support for your ATI Radeon HD 3600 HD Audio device. Maybe jggimi or ocicat have the time
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #5   (View Single Post)  
Old 26th February 2013
adamk adamk is offline
Spam Deminer
 
Join Date: May 2008
Posts: 250
Thanked 5 Times in 8 Posts
Default

Quote:
Originally Posted by J65nko View Post
Code:
azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 3600 HD Audio" rev 0x00: apic 3 int 1
azalia0: no supported codecs
This is the problem
It's not the problem. The OP specifically said he doesn't want to use audio from the video card. He wants to use his actual sound card. Unfortunately, the output of 'dmesg' clearly shows that no sound card is being detected.

ripe, what's the output of 'pcidump'?

Adam
Reply With Quote
  #6   (View Single Post)  
Old 26th February 2013
ripe ripe is offline
New User
 
Join Date: Feb 2013
Location: France
Posts: 8
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by adamk View Post
It's not the problem. The OP specifically said he doesn't want to use audio from the video card. He wants to use his actual sound card. Unfortunately, the output of 'dmesg' clearly shows that no sound card is being detected.

ripe, what's the output of 'pcidump'?

Adam
Yes it is that, i want to use my sound card (chip of my mortherboard) and not my video card as sound card, sorry for not being so clear !

Code:
# pcidump
Domain /dev/pci0:
 0:0:0: VIA K8M890 Host
 0:0:1: VIA K8M890 Host
 0:0:2: VIA K8M890 Host
 0:0:3: VIA K8M890 Host
 0:0:4: VIA K8M890 Host
 0:0:5: VIA K8M890 IOAPIC
 0:0:7: VIA K8M890 Host
 0:1:0: VIA K8HTB AGP
 0:2:0: VIA K8T890 PCI-PCI
 0:3:0: VIA K8T890 PCI-PCI
 0:15:0: VIA VT8237A SATA
 0:15:1: VIA VT82C571 IDE
 0:16:0: VIA VT83C572 USB
 0:16:1: VIA VT83C572 USB
 0:16:2: VIA VT83C572 USB
 0:16:3: VIA VT83C572 USB
 0:16:4: VIA VT6202 USB
 0:17:0: VIA VT8237A ISA
 0:17:7: VIA VT8251 VLINK
 0:18:0: VIA RhineII-2
 0:19:0: VIA VT8237A PCI-PCI
 0:19:1: VIA VT8237A PCI-PCI
 0:24:0: AMD AMD64 0Fh HyperTransport
 0:24:1: AMD AMD64 0Fh Address Map
 0:24:2: AMD AMD64 0Fh DRAM Cfg
 0:24:3: AMD AMD64 0Fh Misc Cfg
 2:0:0: ATI Radeon HD 3650
 2:0:1: ATI Radeon HD 3600 HD Audio
 4:5:0: 3Com 3c905C 100Base-TX
Reply With Quote
  #7   (View Single Post)  
Old 26th February 2013
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,140
Thanked 182 Times in 149 Posts
Default

Your board is MICRO-STAR INTERNATIONAL CO., LTD MS-7253. A quick google shows that you can find the manual at http://www.msi.com/product/mb/K9VGM-V.html

The manual is not very detailed, but says it has onboard VGA and Audio:
Code:
On-Board Peripherals
l    External:
  -   1 x PS/2 mouse connector
  -   1 x PS/2 keyboard connector
  -   1 x Parallel port
  -   1 x COM port
  -   1 x VGA port
  -   4 x USB connectors
  -   1 x RJ-45 connector
  -   1 x Audio jack

   Internal:
  -   1 x Intel/MSI standard Front Panel Pinheader
  -   2 x Front USB pinheader (4 ports)
  -   1 x COM pinheader
  -   1 x CPU Fan connector
  -   1 x System Fan connector
  -   1 x Power Fan connector (Optional)
  -   1 x Clear CMOS connector
  -   1 x Chassis Intrusion Switch connector
               ®
  -   1 x Intel Front Audio pinheader
  -   2 x IDE(ATA133) connectors
  -   1 x Floppy connector
  -   1 x CD-in connector
  -   2 x SATA connectors

Audio
     8-channel audio codec Realtek ALC883.
  -     Compliance with AC97 v2.3 Spec.
  -     Meet PC2001 audio performance requirement.
http://www.msi.com/product/mb/K9VGM-V.html#/?div=Detail mentions:
Code:
Audio

• Chipset integrated by Realtek® ALC883
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
The VIA specs for the VIA K8M890 chipset (North Bridge) are here http://www.via.com.tw/en/products/ch...series/k8m890/
According to that page the corresponding South Bridge is VIA VT8251 that has
the following audio:
Code:
VIA Vinyl™ HD Audio (AC'97 integrated)
VIA Vinyl™ Gold HD Audio (PCI companion controller)
For some reason MSI uses another VIA South Bridge, the VT8237A. http://www.via.com.tw/en/products/ch...237a/specs.jsp

But this chip also mentions the VIA Vinyl audio, and the Realtek ALC883 is not mentioned at all. So I don't know what MSI did with the audio.

At http://www.viaarena.com/forums/showthread.php?t=29131 a Linux user also has problems with audio. According to this post http://www.viaarena.com/forums/showt...131#post190298
Code:
 Default Sound with chipset K8M890 (pci device not found!)
Dear runa,

We checked the kernel source 2.6.18.
It said that those chips(VT8237A and ALC883) would be supported.
We had no such set of combined chips to test.
You can try it.

Regards,
Venus
So it looks like this Linux user also has a similar (MSI ?) board with a similar problem
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #8   (View Single Post)  
Old 26th February 2013
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,140
Thanked 182 Times in 149 Posts
Default

I just checked the motherboard layout on the first page of the manual. It shows an Realtek ALC883 chip next to the PCI slots. So MSI decided not to use the VIA sound stuff at all, but preferred this Realtek chip.

Can you get sound with a Ubuntu Live CD?
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #9   (View Single Post)  
Old 27th February 2013
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,140
Thanked 182 Times in 149 Posts
Default

According to http://www.openbsd.org/plus42.html support for Realtek ALC883 was added in OpenBSD 4.2 .
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
Old 27th February 2013
ripe ripe is offline
New User
 
Join Date: Feb 2013
Location: France
Posts: 8
Thanked 0 Times in 0 Posts
Default

Thank you J65nko, i am impress and grateful by your work and time you spend on this problem.

Yes i have sound on Ubuntu Live CD 9.04, here is the dmesg i got from this Ubuntu :

Code:
[    0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007fef0000 (usable)
[    0.000000]  modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[    0.000000]  modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 7f75c000 - 7febf993
[    0.000000] Allocated new RAMDISK: 00881000 - 00fe4993
[    0.000000] Move RAMDISK from 000000007f75c000 - 000000007febf992 to 00881000 - 00fe4992
[    0.000000] ACPI: RSDP 000F7CE0, 0014 (r0 K8M890)
[    0.000000] ACPI: RSDT 7FEF3040, 0034 (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 7FEF30C0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 7FEF3180, 6DE7 (r1 K8M890 AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 7FEF0000, 0040
[    0.000000] ACPI: HPET 7FEFA080, 0038 (r1 K8M890 AWRDACPI 42302E31 AWRD       98)
[    0.000000] ACPI: MCFG 7FEFA100, 003C (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 7FEF9FC0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1162MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
[    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
[    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000881000 - 0000fe4993]      NEW RAMDISK ==> [0000881000 - 0000fe4993]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00f3ec0] 000f3ec0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0007fef0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fef0
[    0.000000] On node 0 totalpages: 523903
[    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2326 pages used for memmap
[    0.000000]   HighMem zone: 295388 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519809
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1981.570 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 10480000 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 2051860k/2096064k available (4126k kernel code, 42820k reserved, 2208k data, 532k init, 1190856k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3963.14 BogoMIPS (lpj=7926280)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004000] using C1E aware idle routine
[    0.004000] Checking 'hlt' instruction... OK.
[    0.016480] SMP alternatives: switching to UP code
[    0.131591] ACPI: Core revision 20080926
[    0.134250] ACPI: Checking initramfs for custom DSDT
[    0.428477] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.468569] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
[    0.472001] Brought up 1 CPUs
[    0.472001] Total of 1 processors activated (3963.14 BogoMIPS).
[    0.472001] CPU0 attaching NULL sched-domain.
[    0.472001] net_namespace: 776 bytes
[    0.472001] Booting paravirtualized kernel on bare hardware
[    0.472001] Time:  9:07:39  Date: 02/27/13
[    0.472001] regulator: core version 0.5
[    0.472001] NET: Registered protocol family 16
[    0.472001] EISA bus registered
[    0.472001] ACPI: bus type pci registered
[    0.472001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.472001] PCI: MCFG area at e0000000 reserved in E820
[    0.472001] PCI: Using MMCONFIG for extended config space
[    0.472001] PCI: Using configuration type 1 for base access
[    0.472001] ACPI: EC: Look up EC in DSDT
[    0.481636] ACPI: Interpreter enabled
[    0.481643] ACPI: (supports S0 S1 S4 S5)
[    0.481663] ACPI: Using IOAPIC for interrupt routing
[    0.489673] ACPI: No dock devices found.
[    0.489683] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.489747] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[    0.490082] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.490086] pci 0000:00:02.0: PME# disabled
[    0.490127] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.490130] pci 0000:00:03.0: PME# disabled
[    0.490174] pci 0000:00:0f.0: reg 10 io port: [0xff00-0xff07]
[    0.490180] pci 0000:00:0f.0: reg 14 io port: [0xfe00-0xfe03]
[    0.490186] pci 0000:00:0f.0: reg 18 io port: [0xfd00-0xfd07]
[    0.490192] pci 0000:00:0f.0: reg 1c io port: [0xfc00-0xfc03]
[    0.490198] pci 0000:00:0f.0: reg 20 io port: [0xfb00-0xfb0f]
[    0.490204] pci 0000:00:0f.0: reg 24 io port: [0xf400-0xf4ff]
[    0.490256] pci 0000:00:0f.1: reg 20 io port: [0xfa00-0xfa0f]
[    0.490318] pci 0000:00:10.0: reg 20 io port: [0xf900-0xf91f]
[    0.490333] pci 0000:00:10.0: supports D1 D2
[    0.490335] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.490338] pci 0000:00:10.0: PME# disabled
[    0.490378] pci 0000:00:10.1: reg 20 io port: [0xf800-0xf81f]
[    0.490393] pci 0000:00:10.1: supports D1 D2
[    0.490395] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.490399] pci 0000:00:10.1: PME# disabled
[    0.490440] pci 0000:00:10.2: reg 20 io port: [0xf700-0xf71f]
[    0.490455] pci 0000:00:10.2: supports D1 D2
[    0.490457] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.490461] pci 0000:00:10.2: PME# disabled
[    0.490501] pci 0000:00:10.3: reg 20 io port: [0xf600-0xf61f]
[    0.490516] pci 0000:00:10.3: supports D1 D2
[    0.490518] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.490521] pci 0000:00:10.3: PME# disabled
[    0.490547] pci 0000:00:10.4: reg 10 32bit mmio: [0xdffff000-0xdffff0ff]
[    0.490576] pci 0000:00:10.4: supports D1 D2
[    0.490578] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.490582] pci 0000:00:10.4: PME# disabled
[    0.490713] pci 0000:00:12.0: reg 10 io port: [0xf200-0xf2ff]
[    0.490719] pci 0000:00:12.0: reg 14 32bit mmio: [0xdfffe000-0xdfffe0ff]
[    0.490746] pci 0000:00:12.0: supports D1 D2
[    0.490747] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.490751] pci 0000:00:12.0: PME# disabled
[    0.490926] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[    0.490930] pci 0000:00:01.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
[    0.490934] pci 0000:00:01.0: bridge 32bit mmio pref: [0xdfa00000-0xdfafffff]
[    0.490967] pci 0000:02:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
[    0.490977] pci 0000:02:00.0: reg 18 64bit mmio: [0xdfee0000-0xdfeeffff]
[    0.490984] pci 0000:02:00.0: reg 20 io port: [0xde00-0xdeff]
[    0.490994] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.491002] pci 0000:02:00.0: supports D1 D2
[    0.491039] pci 0000:02:00.1: reg 10 64bit mmio: [0xdfefc000-0xdfefffff]
[    0.491067] pci 0000:02:00.1: supports D1 D2
[    0.491114] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
[    0.491118] pci 0000:00:02.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[    0.491123] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.491164] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[    0.491168] pci 0000:00:03.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[    0.491174] pci 0000:00:03.0: bridge 64bit mmio pref: [0xdfc00000-0xdfcfffff]
[    0.491205] pci 0000:04:05.0: reg 10 io port: [0xbf00-0xbf7f]
[    0.491211] pci 0000:04:05.0: reg 14 32bit mmio: [0xdf9ff000-0xdf9ff07f]
[    0.491231] pci 0000:04:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.491239] pci 0000:04:05.0: supports D1 D2
[    0.491241] pci 0000:04:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.491245] pci 0000:04:05.0: PME# disabled
[    0.491275] pci 0000:00:13.1: transparent bridge
[    0.491278] pci 0000:00:13.1: bridge io port: [0xb000-0xbfff]
[    0.491282] pci 0000:00:13.1: bridge 32bit mmio: [0xdf900000-0xdf9fffff]
[    0.491288] pci 0000:00:13.1: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff]
[    0.491304] bus 00 -> node 0
[    0.491310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.491687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[    0.491831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.491972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[    0.566538] ACPI: PCI Root Bridge [PCI1] (0000:80)
[    0.566585] pci 0000:80:01.0: reg 10 64bit mmio: [0xbfffc000-0xbfffffff]
[    0.566608] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[    0.566611] pci 0000:80:01.0: PME# disabled
[    0.566648] bus 80 -> node 0
[    0.566653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[    0.567216] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.567429] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[    0.567640] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[    0.567852] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
[    0.568050] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.568232] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.568413] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.568608] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[    0.568745] ACPI: WMI: Mapper loaded
[    0.568918] SCSI subsystem initialized
[    0.568953] libata version 3.00 loaded.
[    0.568993] usbcore: registered new interface driver usbfs
[    0.569007] usbcore: registered new interface driver hub
[    0.569031] usbcore: registered new device driver usb
[    0.569130] PCI: Using ACPI for IRQ routing
[    0.569243] Bluetooth: Core ver 2.13
[    0.569243] NET: Registered protocol family 31
[    0.569243] Bluetooth: HCI device and connection manager initialized
[    0.569243] Bluetooth: HCI socket layer initialized
[    0.569243] NET: Registered protocol family 8
[    0.569243] NET: Registered protocol family 20
[    0.569243] NetLabel: Initializing
[    0.569243] NetLabel:  domain hash size = 128
[    0.569243] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.569243] NetLabel:  unlabeled traffic allowed by default
[    0.569243] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.569243] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.572069] AppArmor: AppArmor Filesystem Enabled
[    0.572076] pnp: PnP ACPI init
[    0.572076] ACPI: bus type pnp registered
[    0.576017] Switched to high resolution mode on CPU 0
[    0.577810] pnp: PnP ACPI: found 16 devices
[    0.577812] ACPI: ACPI bus type pnp unregistered
[    0.577815] PnPBIOS: Disabled by ACPI PNP
[    0.577825] system 00:01: ioport range 0x400-0x47f has been reserved
[    0.577828] system 00:01: ioport range 0x500-0x50f has been reserved
[    0.577833] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.577836] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.577844] system 00:0c: iomem range 0xf0000000-0xf0000fff has been reserved
[    0.577849] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.577855] system 00:0f: iomem range 0xd0000-0xd3fff has been reserved
[    0.577858] system 00:0f: iomem range 0xd8800-0xdbfff has been reserved
[    0.577860] system 00:0f: iomem range 0xf0000-0xfbfff could not be reserved
[    0.577863] system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
[    0.577866] system 00:0f: iomem range 0x7ff00000-0x7fffffff has been reserved
[    0.577869] system 00:0f: iomem range 0xfed00000-0xfed000ff has been reserved
[    0.577871] system 00:0f: iomem range 0x7fef0000-0x7fefffff could not be reserved
[    0.577874] system 00:0f: iomem range 0xffff0000-0xffffffff has been reserved
[    0.577877] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.577880] system 00:0f: iomem range 0x100000-0x7feeffff could not be reserved
[    0.577883] system 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.577886] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.577888] system 00:0f: iomem range 0xfff80000-0xfffeffff has been reserved
[    0.612576] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.612579] pci 0000:00:01.0:   IO window: 0xe000-0xefff
[    0.612584] pci 0000:00:01.0:   MEM window: 0xdfb00000-0xdfbfffff
[    0.612588] pci 0000:00:01.0:   PREFETCH window: 0x000000dfa00000-0x000000dfafffff
[    0.612595] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[    0.612598] pci 0000:00:02.0:   IO window: 0xd000-0xdfff
[    0.612603] pci 0000:00:02.0:   MEM window: 0xdfe00000-0xdfefffff
[    0.612607] pci 0000:00:02.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.612612] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[    0.612615] pci 0000:00:03.0:   IO window: 0xc000-0xcfff
[    0.612620] pci 0000:00:03.0:   MEM window: 0xdfd00000-0xdfdfffff
[    0.612624] pci 0000:00:03.0:   PREFETCH window: 0x000000dfc00000-0x000000dfcfffff
[    0.612631] pci 0000:00:13.1: PCI bridge, secondary bus 0000:04
[    0.612634] pci 0000:00:13.1:   IO window: 0xb000-0xbfff
[    0.612638] pci 0000:00:13.1:   MEM window: 0xdf900000-0xdf9fffff
[    0.612642] pci 0000:00:13.1:   PREFETCH window: 0x000000df800000-0x000000df8fffff
[    0.612653] pci 0000:00:01.0: setting latency timer to 64
[    0.612665] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    0.612669] pci 0000:00:02.0: setting latency timer to 64
[    0.612677] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[    0.612681] pci 0000:00:03.0: setting latency timer to 64
[    0.612687] pci 0000:00:13.1: setting latency timer to 64
[    0.612691] bus: 00 index 0 io port: [0x00-0xffff]
[    0.612693] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.612695] bus: 01 index 0 io port: [0xe000-0xefff]
[    0.612698] bus: 01 index 1 mmio: [0xdfb00000-0xdfbfffff]
[    0.612700] bus: 01 index 2 mmio: [0xdfa00000-0xdfafffff]
[    0.612702] bus: 01 index 3 mmio: [0x0-0x0]
[    0.612704] bus: 02 index 0 io port: [0xd000-0xdfff]
[    0.612706] bus: 02 index 1 mmio: [0xdfe00000-0xdfefffff]
[    0.612708] bus: 02 index 2 mmio: [0xc0000000-0xcfffffff]
[    0.612710] bus: 02 index 3 mmio: [0x0-0x0]
[    0.612712] bus: 03 index 0 io port: [0xc000-0xcfff]
[    0.612714] bus: 03 index 1 mmio: [0xdfd00000-0xdfdfffff]
[    0.612716] bus: 03 index 2 mmio: [0xdfc00000-0xdfcfffff]
[    0.612718] bus: 03 index 3 mmio: [0x0-0x0]
[    0.612720] bus: 04 index 0 io port: [0xb000-0xbfff]
[    0.612722] bus: 04 index 1 mmio: [0xdf900000-0xdf9fffff]
[    0.612724] bus: 04 index 2 mmio: [0xdf800000-0xdf8fffff]
[    0.612726] bus: 04 index 3 io port: [0x00-0xffff]
[    0.612728] bus: 04 index 4 mmio: [0x000000-0xffffffff]
[    0.612730] bus: 80 index 0 io port: [0x00-0xffff]
[    0.612732] bus: 80 index 1 mmio: [0x000000-0xffffffff]
[    0.612743] NET: Registered protocol family 2
[    0.612880] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.613142] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.613638] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.613878] TCP: Hash tables configured (established 131072 bind 65536)
[    0.613881] TCP reno registered
[    0.613981] NET: Registered protocol family 1
[    0.614096] checking if image is initramfs... it is
[    1.213153] Freeing initrd memory: 7566k freed
[    1.213235] cpufreq: No nForce2 chipset.
[    1.213349] audit: initializing netlink socket (disabled)
[    1.213362] type=2000 audit(1361956059.212:1): initialized
[    1.221205] highmem bounce pool size: 64 pages
[    1.221211] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.222288] VFS: Disk quotas dquot_6.5.1
[    1.222338] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.222886] fuse init (API version 7.10)
[    1.222965] msgmni has been set to 1698
[    1.223117] alg: No test for stdrng (krng)
[    1.223127] io scheduler noop registered
[    1.223129] io scheduler anticipatory registered
[    1.223130] io scheduler deadline registered
[    1.223146] io scheduler cfq registered (default)
[    1.223153] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    1.223163] PCI: VIA PCI bridge detected.Disabling DAC.
[    1.223246] pci 0000:02:00.0: Boot video device
[    1.223335] pcieport-driver 0000:00:02.0: setting latency timer to 64
[    1.223366] pcieport-driver 0000:00:02.0: found MSI capability
[    1.223369] pci_express 0000:00:02.0:pcie00: allocate port service
[    1.223383] pci_express 0000:00:02.0:pcie01: allocate port service
[    1.223393] pci_express 0000:00:02.0:pcie02: allocate port service
[    1.223404] pci_express 0000:00:02.0:pcie03: allocate port service
[    1.223449] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    1.223483] pcieport-driver 0000:00:03.0: found MSI capability
[    1.223486] pci_express 0000:00:03.0:pcie00: allocate port service
[    1.223496] pci_express 0000:00:03.0:pcie01: allocate port service
[    1.223510] pci_express 0000:00:03.0:pcie02: allocate port service
[    1.223520] pci_express 0000:00:03.0:pcie03: allocate port service
[    1.227625] aer 0000:00:02.0:pcie01: service driver aer loaded
[    1.231587] aer 0000:00:03.0:pcie01: service driver aer loaded
[    1.231596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.232056] pciehp 0000:00:02.0:pcie02: HPC vendor_id 1106 device_id a238 ss_vid 0 ss_did 0
[    1.232079] pciehp 0000:00:02.0:pcie02: service driver pciehp loaded
[    1.232499] pciehp 0000:00:03.0:pcie02: HPC vendor_id 1106 device_id c238 ss_vid 0 ss_did 0
[    1.232520] pciehp 0000:00:03.0:pcie02: service driver pciehp loaded
[    1.232527] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.232651] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.232654] ACPI: Power Button (FF) [PWRF]
[    1.232692] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.232694] ACPI: Power Button (CM) [PWRB]
[    1.233325] processor ACPI_CPU:00: registered as cooling_device0
[    1.237536] isapnp: Scanning for PnP cards...
[    1.591221] isapnp: No Plug & Play device found
[    1.592262] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.592344] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.592426] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.592676] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.592785] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.593499] brd: module loaded
[    1.593789] loop: module loaded
[    1.593861] Fixed MDIO Bus: probed
[    1.593867] PPP generic driver version 2.4.2
[    1.593924] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.593952] Driver 'sd' needs updating - please use bus_type methods
[    1.593960] Driver 'sr' needs updating - please use bus_type methods
[    1.594100] sata_via 0000:00:0f.0: version 2.4
[    1.594119] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.594153] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.594241] scsi0 : sata_via
[    1.594329] scsi1 : sata_via
[    1.595752] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 21
[    1.595755] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 21
[    1.796020] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.008013] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.018960] pata_via 0000:00:0f.1: version 0.3.3
[    2.019081] scsi2 : pata_via
[    2.019139] scsi3 : pata_via
[    2.020768] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    2.020770] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    2.185460] ata3.00: ATA-5: WDC WD400BB-23DEA0, 05.03E05, max UDMA/100
[    2.185463] ata3.00: 78165360 sectors, multi 16: LBA 
[    2.201336] ata3.00: configured for UDMA/100
[    2.372371] ata4.00: ATAPI: PIONEER DVD-ROM DVD-115, 1.12, max UDMA/33
[    2.372399] ata4.01: ATAPI: TSSTcorpCD/DVDW SH-S162A, TS02, max UDMA/33
[    2.388266] ata4.00: configured for UDMA/33
[    2.404267] ata4.01: configured for UDMA/33
[    2.405415] scsi 2:0:0:0: Direct-Access     ATA      WDC WD400BB-23DE 05.0 PQ: 0 ANSI: 5
[    2.405504] sd 2:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[    2.405518] sd 2:0:0:0: [sda] Write Protect is off
[    2.405521] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.405542] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.405600] sd 2:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[    2.405612] sd 2:0:0:0: [sda] Write Protect is off
[    2.405614] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.405635] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.405639]  sda: sda4
[    2.423467]  sda4: <openbsd: sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
[    2.423718] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.423763] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.425072] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-ROM DVD-115  1.12 PQ: 0 ANSI: 5
[    2.425819] sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
[    2.425823] Uniform CD-ROM driver Revision: 3.20
[    2.425908] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.425945] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.427025] scsi 3:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S162A TS02 PQ: 0 ANSI: 5
[    2.429893] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.429957] sr 3:0:1:0: Attached scsi CD-ROM sr1
[    2.429999] sr 3:0:1:0: Attached scsi generic sg2 type 5
[    2.430134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.430157] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.430180] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    2.430235] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    2.430269] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
[    2.440017] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    2.440083] usb usb1: configuration #1 chosen from 1 choice
[    2.440109] hub 1-0:1.0: USB hub found
[    2.440116] hub 1-0:1.0: 8 ports detected
[    2.440214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.440231] uhci_hcd: USB Universal Host Controller Interface driver
[    2.440272] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.440278] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.440316] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.440344] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900
[    2.440410] usb usb2: configuration #1 chosen from 1 choice
[    2.440437] hub 2-0:1.0: USB hub found
[    2.440444] hub 2-0:1.0: 2 ports detected
[    2.440519] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    2.440524] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.440567] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.440593] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800
[    2.440660] usb usb3: configuration #1 chosen from 1 choice
[    2.440682] hub 3-0:1.0: USB hub found
[    2.440688] hub 3-0:1.0: 2 ports detected
[    2.440760] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.440765] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.440805] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.440823] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
[    2.440889] usb usb4: configuration #1 chosen from 1 choice
[    2.440917] hub 4-0:1.0: USB hub found
[    2.440923] hub 4-0:1.0: 2 ports detected
[    2.440997] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.441002] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    2.441038] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    2.441063] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600
[    2.441135] usb usb5: configuration #1 chosen from 1 choice
[    2.441156] hub 5-0:1.0: USB hub found
[    2.441162] hub 5-0:1.0: 2 ports detected
[    2.441263] usbcore: registered new interface driver libusual
[    2.441295] usbcore: registered new interface driver usbserial
[    2.441304] USB Serial support registered for generic
[    2.441317] usbcore: registered new interface driver usbserial_generic
[    2.441319] usbserial: USB Serial Driver core
[    2.441358] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.441361] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.441447] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.441550] mice: PS/2 mouse device common for all mice
[    2.441675] rtc_cmos 00:04: RTC can wake from S4
[    2.441704] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.441737] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.441806] device-mapper: uevent: version 1.0.3
[    2.441907] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.441948] device-mapper: multipath: version 1.0.5 loaded
[    2.441951] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.442025] EISA: Probing bus 0 at eisa.0
[    2.442060] EISA: Detected 0 cards.
[    2.442082] cpuidle: using governor ladder
[    2.442084] cpuidle: using governor menu
[    2.442544] TCP cubic registered
[    2.442631] NET: Registered protocol family 10
[    2.442993] lo: Disabled Privacy Extensions
[    2.443277] NET: Registered protocol family 17
[    2.443293] Bluetooth: L2CAP ver 2.11
[    2.443294] Bluetooth: L2CAP socket layer initialized
[    2.443297] Bluetooth: SCO (Voice Link) ver 0.6
[    2.443298] Bluetooth: SCO socket layer initialized
[    2.443326] Bluetooth: RFCOMM socket layer initialized
[    2.443332] Bluetooth: RFCOMM TTY layer initialized
[    2.443334] Bluetooth: RFCOMM ver 1.10
[    2.443355] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ processors (1 cpu cores) (version 2.20.00)
[    2.448531] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[    2.448596] Using IPI No-Shortcut mode
[    2.448683] registered taskstats version 1
[    2.448803]   Magic number: 1:23:122
[    2.448896] rtc_cmos 00:04: setting system clock to 2013-02-27 09:07:41 UTC (1361956061)
[    2.448899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.448901] EDD information not available.
[    2.449188] Freeing unused kernel memory: 532k freed
[    2.449312] Write protecting the kernel text: 4128k
[    2.449355] Write protecting the kernel read-only data: 1532k
[    2.485986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.903955] FDC 0 is a post-1991 82077
[    2.936038] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    3.046213] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    3.046253] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.046874] eth0: VIA Rhine II at 0xdfffe000, 00:19:db:c1:43:89, IRQ 23.
[    3.047518] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[    3.057391] 3c59x 0000:04:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.057415] 3c59x: Donald Becker and others.
[    3.057421] 0000:04:05.0: 3Com PCI 3c905C Tornado at f7c50000.
[    3.157463] usb 2-2: configuration #1 chosen from 1 choice
[    3.342377] usbcore: registered new interface driver hiddev
[    3.381658] input: HID 1241:1166 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4
[    3.381958] generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:10.0-2/input0
[    3.381977] usbcore: registered new interface driver usbhid
[    3.381980] usbhid: v2.6:USB HID core driver
[    5.327706] ISO 9660 Extensions: Microsoft Joliet Level 3
[    5.352812] ISO 9660 Extensions: RRIP_1991A
[    5.570896] aufs 20080922
[    5.791336] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[   52.901181] udev: starting version 141
[   53.144810] parport_pc 00:0a: reported by Plug and Play ACPI
[   53.144856] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   53.461921] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.728329] Linux agpgart interface v0.103
[   53.891360] ppdev: user-space parallel port driver
[   54.523465] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   54.571441] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[   54.576387] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[   54.820544] HDA Intel 0000:02:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
[   54.820660] HDA Intel 0000:02:00.1: setting latency timer to 64
[   54.820665] HDA Intel 0000:02:00.1: PCI: Disallowing DAC for device
[   54.868448] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   54.868495] HDA Intel 0000:80:01.0: setting latency timer to 64
[   54.868499] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[   54.901911] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   64.487756] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   64.487760] Bluetooth: BNEP filters: protocol multicast
[   64.520836] Bridge firewalling registered
[   68.353846] pci 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[   68.657177] [drm] Initialized drm 1.1.0 20060810
[   68.721868] pci 0000:02:00.0: setting latency timer to 64
[   68.722027] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   69.529872] lp0: using parport0 (interrupt-driven).
[   69.546591] [drm] Setting GART location based on new memory map
[   69.563083] [drm] Loading RV635 CP Microcode
[   69.563793] [drm] Loading RV635 PFP Microcode
[   69.578797] [drm] Resetting GPU
[   69.578855] [drm] writeback test succeeded in 1 usecs
[   72.951310] eth1:  setting full-duplex.
[   72.952708] eth0: link down
[   72.952921] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   78.450796] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   83.284011] eth1: no IPv6 routers present
Reply With Quote
Old 27th February 2013
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,140
Thanked 182 Times in 149 Posts
Default

Code:
    559 [   53.728329] Linux agpgart interface v0.103
    560 [   53.891360] ppdev: user-space parallel port driver
    561 [   54.523465] input: PC Speaker as /devices/platform/pcspkr/input/input5
    562 [   54.571441] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
    563 [   54.576387] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
    564 [   54.820544] HDA Intel 0000:02:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
    565 [   54.820660] HDA Intel 0000:02:00.1: setting latency timer to 64
    566 [   54.820665] HDA Intel 0000:02:00.1: PCI: Disallowing DAC for device
    567 [   54.868448] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    568 [   54.868495] HDA Intel 0000:80:01.0: setting latency timer to 64
    569 [   54.868499] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
    570 [   54.901911] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
So it looks like Linux has to consult the BIOS in order to recognize that particular ALC883 chip.
BTW the Wikipedia entry for Intel High Definition Audio reveals:
Quote:
Intel High Definition Audio (also called HD Audio or Azalia) refers to the specification released by Intel in 2004[1] for delivering high-definition audio that is capable of playing back more channels at higher quality than previous integrated audio codecs like AC'97. During development it had the codename Azalia.
So that is the origin of the azalia name.

If you only installed 5.2 recently and thus is it not much a hassle to backup your stuff, you could try the latest snapshot ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/i386/
This snapshot is very, very close to what will be OpenBSD 5.3 which will be released on May 1st 2013.

If this snapshot also does not give you sound, you could ask on the OpenBSD misc mailing list, but be aware that the developers are very busy right now with the 5.3 release, so don't be disappointed if they do not have the time to answer or assist you in this matter right now.
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
Old 27th February 2013
ripe ripe is offline
New User
 
Join Date: Feb 2013
Location: France
Posts: 8
Thanked 0 Times in 0 Posts
Default

I tried 5.3 but i did not have sound too, so i will write to OpenBSD misc mailing list, thank you J65nko and AdamK.
Reply With Quote
Old 2nd May 2013
ripe ripe is offline
New User
 
Join Date: Feb 2013
Location: France
Posts: 8
Thanked 0 Times in 0 Posts
Default

I am using 5.3 which i downloaded and installed yesterday and sound work !

Code:
$ dmesg | grep -i audio                                                        
azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 3600 HD Audio" rev 0x00: apic 3 int 1
azalia1 at pci5 dev 1 function 0 "VIA HD Audio" rev 0x10: apic 2 int 17
audio0 at azalia1

Code:
$ audioctl | head -10                                        
name=HD-Audio
version=1.0
config=azalia1
encodings=slinear_le:16:2:1,slinear_le:20:4:1,slinear_le:24:4:1
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=3840
hiwat=9
lowat=1
Maybe it is the email i send to OpenBSD or not, but i am happy with sound now

Ty again J65nko and adamk !
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
No boot w/o video card stevedb OpenBSD Installation and Upgrading 4 12th June 2012 05:53 PM
Getting Xfce4 to recognize sound card harishankar NetBSD General 5 13th November 2011 10:30 AM
Recording sound with external sound card backrow OpenBSD General 5 21st August 2009 08:17 PM
NetBSD amd64 NVidia Quadro NVS 285 video card morten42 NetBSD General 5 30th July 2008 03:49 PM
Adding Additional Video Card JMJ_coder General software and network 0 19th July 2008 07:16 PM


All times are GMT. The time now is 04:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick