Go Back   DaemonForums > OpenBSD > OpenBSD Packages and Ports

OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 29th April 2013
denta denta is offline
Shell Scout
Join Date: Nov 2009
Location: Sweden
Posts: 95
Default aircrack-ng -w segfault (fixed in 5.3)


I've been playing around a bit with aircrack lately, and as far as I can tell it works pretty well, except when using the -w option. That is, using a wordlist. Anyone got any ideas what could be wrong?

The system is a semi-crappy netbook running 5.2 release, with aircrack-ng installed from packages.
$ aircrack-ng -w wordlist belkin.c30.dump 
Opening belkin.c30.dump
Read 104171 packets.

   #  BSSID              ESSID                     Encryption

   1  08:86:3B:4C:8C:32  belkin.c30                WPA (1 handshake)

Choosing first network as target.

Opening belkin.c30.dump
Segmentation fault (core dumped)
OpenBSD 5.2 (GENERIC.MP) #339: Wed Aug  1 10:13:24 MDT 2012
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
real mem  = 1061302272 (1012MB)
avail mem = 1033080832 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/12/10, SMBIOS rev. 2.6 @ 0xe80a0 (36 entries)
bios0: vendor Packard Bell version "V3.05(DDR2)" date 08/12/2010
bios0: Packard Bell DOT SE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: wakeup devices UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S0) EXP3(S4) EXP4(S
4) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (EXP1)
acpiprt2 at acpi0: bus 2 (EXP2)
acpiprt3 at acpi0: bus -1 (EXP3)
acpiprt4 at acpi0: bus -1 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: FN00
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID0
acpibat0 at acpi0: BAT0 model "13848628933250113" type Lion oem "SANYO "
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: OVGA
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1666, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC272
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
pci1 at ppb0 bus 1
alc0 at pci1 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address 88:ae:1d:79:b1:9a
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 5c:ac:4c:55:fb:68
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 18
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 21
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 22
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54501, PBBO> SCSI3 0/direct fixed naa.5000cca5fed64e4b
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "XPA5Y03YA 1.3M WebCam" rev 2.00/0.09 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (fc0c9556117d1a84.a) swap on sd0b dump on sd0b
sd1 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 99205MB, 512 bytes/sector, 203173527 sectors

Last edited by denta; 1st May 2013 at 03:45 PM.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Diagnosing a segfault error Albright FreeBSD General 2 7th July 2009 03:11 AM
firefox segfault in windowmaker and icewm davidgurvich FreeBSD General 4 25th August 2008 02:58 PM

All times are GMT. The time now is 01:27 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick