DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 12th August 2013
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Thanked 0 Times in 0 Posts
Default OpenBSD bwi0 issue on Latitude D800

Hi everybody !
I've installed OpenBSD 5.3 stable on Latitude D800
dmesg:
Code:
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 600 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF
real mem  = 1609814016 (1535MB)
avail mem = 1572528128 (1499MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/03/04, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf8c40 (63 entries)
bios0: vendor Dell Computer Corporation version "A11" date 09/03/2004
bios0: Dell Computer Corporation Latitude D800
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP ASF!
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S1) USB1(S1) USB2(S1) USB3(S1) MODM(S3) PCIE(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpicpu0 at acpi0: C3, C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 90 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800!
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 600 MHz: speeds: 2000, 1800, 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX Go 5650" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5705M" rev 0x01, BCM5705 A1 (0x3001): irq 11, address 00:11:43:6d:11:f2
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 1
cbb0 at pci2 dev 1 function 0 "TI PCI7510 CardBus" rev 0x01: irq 11, CardBus support disabled
cbb1 at pci2 dev 1 function 1 "TI PCI7610 CardBus (Smart Card mode)" rev 0x01: irq 11, CardBus support disabled
"TI PCI7(4-6)10 FireWire" rev 0x00 at pci2 dev 1 function 2 not configured
vendor "TI", unknown product 0x8204 (class system subclass miscellaneous, rev 0x00) at pci2 dev 1 function 3 not configured
bwi0 at pci2 dev 3 function 0 "Broadcom BCM4309" rev 0x03: irq 11, address 00:90:4b:cd:a6:b4
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS548080M9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-6100A, 104D> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
rum0 at uhub0 port 3 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e
ugen0 at uhub1 port 2 "Dell Bluetooth" rev 2.00/12.66 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "USB USB Keykoard" rev 1.10/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "USB USB Keykoard" rev 1.10/1.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (77f3eca9aeacaeb2.a) swap on wd0b dump on wd0b
when I installed bwi firmware and set bwi0 interface I had this error line repeated endlessly after reboot .. the error reads :
Code:
bwi0: intr fatal TX/RX (0) error 0x00001000
Any help is appreciated
Regards.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
bwi0 on Powerbook G4 crashes tsarpal OpenBSD General 3 23rd February 2013 02:40 AM
4.7 Install on MacBookPro (Core i7): bwi0 dylanz OpenBSD Installation and Upgrading 8 5th June 2010 06:07 AM
OpenBSD 4.7 issue? rpindy OpenBSD Installation and Upgrading 18 21st May 2010 12:33 AM
Downloading free OpenBSD issue karolina OpenBSD General 1 19th June 2009 10:36 AM
How to Fix Security Issue In OpenBSD 4.1 Stable ? openbsdspirit OpenBSD General 4 21st June 2008 11:33 AM


All times are GMT. The time now is 10:05 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick