DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD General

FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 22nd August 2013
caravel caravel is offline
Port Guard
 
Join Date: Jun 2012
Posts: 25
Thanked 0 Times in 0 Posts
Default bwn/bwi drivers with Broadcom BCM4318

Any experiences of the bwn/bwi drivers with Broadcom BCM4318 based PCI wireless g NIC?

Have been fiddling with this for two days and have searched and read everything I could find.

I have been using bwi, but the connection is very unreliable (not in front of the box now, but can post the output which appears in tty in several hours).

I decided to try bwn as it uses a newer firmware (the 4.x firmware which I've used under GNU/Linux with no problems - I had problems with the earlier 3.x firmware so thought it might be related).

After 4 hours yesterday I figured out how to get bwn to load the firmware (from /boot/loader.conf - when it tries to load the firmware itself, it fails) - rebooted and the connection finally came up - except bwn is even worse for disconnections - in fact it's unusable in my case. I had to switch back to bwi.

I want to avoid messing with ndisgen and windows blobs, so if anyone has any experience of this or can point me in the right direction - much appreciated.

Thanks
Reply With Quote
  #2   (View Single Post)  
Old 22nd August 2013
caravel caravel is offline
Port Guard
 
Join Date: Jun 2012
Posts: 25
Thanked 0 Times in 0 Posts
Default

I gave up and plugged in a wireless USB dongle which seems to work ok for now. Here's some details for anyone who's interested.

Code:
$ cat /etc/rc.conf

# -- sysinstall generated deltas -- # Sun Aug 18 11:08:56 2013
# Created: Sun Aug 18 11:08:56 2013
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
inetd_enable="NO"
keymap="uk.iso"
dbus_enable="YES"
hald_enable="YES"
wlans_rum0="wlan0"
ifconfig_wlan0="WPA DHCP"
Part of dmesg
Code:
ugen4.2: <Abocom> at usbus4
rum0: <Abocom 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 2> on usbus4
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
Trying to mount root from ufs:/dev/ad6s1a
wlan0: Ethernet address: 00:12:0e:a2:15:13
wlan0: link state changed to UP
rum0: need to implement rum_update_mcast
//edit: the dongle seems to overheat and causes the system to freeze or reboot. Back to the BCM4318 and bwi...

//edit2: I went out and bought an Atheros AR9227 based wireless pci card - only to find that it's not supported by FreeBSD 8.x ... not too sure about 9.x now either... oh well, I am going to go back to trying to get 9.x installed - downloaded 9.2 RC3 yesterday...

//edit3: It works fine in 9.2 RC3, but I had to manually reconfigure. Ah well end of thread.

//edit4: Finally got 9.1 installed and the AR9227 is working well - the end.

Last edited by caravel; 9th September 2013 at 11:01 AM.
Reply With Quote
  #3   (View Single Post)  
Old 10th September 2013
angryfirelord angryfirelord is offline
Port Guard
 
Join Date: Jul 2008
Posts: 21
Thanked 0 Times in 0 Posts
Default

There's a chart on wikipedia that lists the available drivers for FreeBSD and if they depend on non-free firmware: http://en.wikipedia.org/wiki/Compari...rivers#FreeBSD

Just as a note, you might still run into an issue with the AR9227 card.

https://wiki.freebsd.org/dev/ath_hal...ardwareSupport
Quote:
AR9227/AR9287

interrupt read-and-clear bug
Reply With Quote
  #4   (View Single Post)  
Old 11th September 2013
caravel caravel is offline
Port Guard
 
Join Date: Jun 2012
Posts: 25
Thanked 0 Times in 0 Posts
Default

Thanks, I read about the bug not long after ordering the AR9227, but so far I´ve had no problems.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
bcm43227 wl driver or broadcom-sta tolstoi NetBSD General 11 16th January 2012 08:55 AM
Broadcom wireless driver rpindy OpenBSD Installation and Upgrading 13 17th July 2010 02:58 PM
Broadcom NIC syrushcw FreeBSD General 5 4th June 2009 01:55 AM
broadcom 4312 jaideep_jdof OpenBSD General 1 18th November 2008 11:45 AM
broadcom ethernet jaideep_jdof NetBSD General 0 16th November 2008 05:33 PM


All times are GMT. The time now is 09:47 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick