DaemonForums  

Go Back   DaemonForums > Other Operating Systems > Solaris

Solaris SUN Solaris & OpenSolaris.

Reply
 
Thread Tools Display Modes
Old 2nd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default

[QUOTE=BSDfan666;4828]Uhh, I'm not sure why it's bailing out like that... just an idea, but have you tried running as root?

yes as root just now same thing
/usr/bin/cdrecord.bin: Medium is already formatted.
/usr/bin/cdrecord.bin: Cannot format medium

Maybe now its time to try to write then try to append

cdrecord dev=7,1,0 -v -dao test.iso
Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '7,1,0'
scsibus: 7 target: 1 lun: 0
Warning: Using USCSI interface.
Using libscg version 'schily-0.8'.
SCSI buffer size: 57344
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'DVDRW LH-20A1P '
Revision : 'KL0A'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+RW
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW (current)
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: PACKET SAO
Drive buf size : 1068032 = 1043 KB
FIFO size : 4194304 = 4096 KB

Still unable to write anything

Track 01: data unknown length
/usr/bin/cdrecord.bin: Track 1 has unknown length.
/usr/bin/cdrecord.bin: Use tsize= option in SAO mode to specify track size.
__________________
The journey is better then the destination

Last edited by whispersGhost; 2nd June 2008 at 11:38 PM.
Reply With Quote
Old 2nd June 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

That's good news!

$ mkisofs -print-size test.iso
Put the number it returns into the argument below..

$ cdrecord dev=7,1,0 tsize=above-number(followed by an s) -v -sao -test.iso

Don't post old output when someone is trying to help you, be kind enough to open a console and run the commands..

Post the output here for kicks?

Last edited by BSDfan666; 2nd June 2008 at 11:43 PM.
Reply With Quote
Old 2nd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default lol

Sorry about the old output

i guess i had forgotten i reinstalled Open Solaris
Different version 05 08 with compiz

Here is seems to be working now

But i do not see anything on the Disk but something is happening for sure.

cdrecord dev=7,1,0 -v -sao GNUMPlayer-1.0rc2.pkg

cdrecord dev=7,1,0 -v -sao GNUMPlayer-1.0rc2.pkg
Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '7,1,0'
scsibus: 7 target: 1 lun: 0
Warning: Using USCSI interface.
Using libscg version 'schily-0.8'.
SCSI buffer size: 57344
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'DVDRW LH-20A1P '
Revision : 'KL0A'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+RW
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW (current)
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: PACKET SAO
Drive buf size : 1068032 = 1043 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 28 MB
Total size: 28 MB = 14447 sectors
Current Secsize: 2048
Trying to clear drive status.
Forcespeed is OFF.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 2280657
Forcespeed is OFF.
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 02: 28 of 28 MB written (fifo 100%) [buf 99%] 4.0x.
WARNING: padding up to secsize.
Track 02: Total bytes read/written: 29586432/29587456 (14447 sectors).
Writing time: 17.005s
Average write speed 1.3x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 2.010s
/usr/bin/cdrecord.bin: fifo had 516 puts and 516 gets.
/usr/bin/cdrecord.bin: fifo was 0 times empty and 152 times full, min fill was 83%.
__________________
The journey is better then the destination

Last edited by whispersGhost; 2nd June 2008 at 11:54 PM.
Reply With Quote
Old 2nd June 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

GNUMPlayer-1.0rc2.pkg is not a disk image with a valid file system... it's simply a file!

You need to create an image.. either ISO9660 or UDF.

EDIT: Woah, According to Wikipedia DVD+RW can be used like a normal block device.. you may be able to entirely eliminate cdrtools from the scenario and "newfs" it like any other device. (FFS file system even?)..

I don't know how Solaris names it's device nodes so I can't help you with that.
Reply With Quote
Old 3rd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default hi

hm

Do not worry about it i think for now we leave it simple as we have been doing lol
before i move over and try this block device you mention

Oh you mean i just cant for example copy
an avi file to the DVD+RW without making an iso first?

Would any of these iso command be helpful for me,
__________________
The journey is better then the destination

Last edited by whispersGhost; 3rd June 2008 at 12:09 AM.
Reply With Quote
Old 3rd June 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

Quote:
Originally Posted by heatherval View Post
hm

Do not worry about it i think for now we leave it simple as we have been doing lol
before i move over and try this block device you mention

Oh you mean i just cant for example copy
an avi file to the DVD+RW without making an iso first?

Would any of these iso command be helpful for me,
Make a directory, put the files you want on the DVD in it..
$ mkdir my-dvd
$ mv GNUMPlayer-1.0rc2.pkg my-dvd
Create an image, with Rockridge extensions.. (Support for Unix permissions.)
$ mkisofs -o test.iso -R my-dvd
Burn!
$ cdrecord dev=7,1,0 -v -sao test.iso

Do the "mkisofs -print-size" step I posted earlier if this fails, you might need it..
Reply With Quote
Old 3rd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default hi

When you said if all esle fails
you mean to do like this?

mkisofs -print-size -R my-dvd


mkisofs -o test.iso -R my-dvd
34.20% done, estimate finish Mon Jun 2 20:24:06 2008
68.45% done, estimate finish Mon Jun 2 20:24:06 2008
Total translation table size: 0
Total rockridge attributes bytes: 262
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 48000
14622 extents written (28 MB)
electric@lucid-dreamer:~# cdrecord dev=7,1,0 -v -sao test.iso
Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '7,1,0'
scsibus: 7 target: 1 lun: 0
Warning: Using USCSI interface.
Using libscg version 'schily-0.8'.
SCSI buffer size: 57344
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'DVDRW LH-20A1P '
Revision : 'KL0A'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+RW
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW (current)
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: PACKET SAO
Drive buf size : 1068032 = 1043 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 28 MB
Total size: 28 MB = 14622 sectors
Current Secsize: 2048
Trying to clear drive status.
Forcespeed is OFF.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 2280482
Forcespeed is OFF.
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 02: 1 of 28 MB written (fifo 97%) [buf 99%] 0Track 02: 2 of 28 MB written (fifo 100%) [buf 99%] 4Track 02: 3 of 28 MB written (fifo 98%) [buf 99%] 4Track 02: 4 of 28 MB written (fifo 100%) [buf 99%] 3Track 02: 5 of 28 MB written (fifo 98%) [buf 99%] 4Track 02: 6 of 28 MB written (fifo 100%) [buf 99%] 4Track 02: 7 of 28 MB written (fifo 98%) [buf 99%] 4Track 02: 8 of 28 MB written (fifo 100%) [buf 99%] 3Track 02: 9 of 28 MB written (fifo 98%) [buf 99%] 4Track 02: 10 of 28 MB written (fifo 97%) [buf 99%] 4Track 02: 11 of 28 MB written (fifo 98%) [buf 99%] 3Track 02: 12 of 28 MB written (fifo 97%) [buf 99%] 4Track 02: 13 of 28 MB written (fifo 100%) [buf 99%] 4Track 02: 14 of 28 MB written (fifo 98%) [buf 99%] 4Track 02: 15 of 28 MB written (fifo 100%) [buf 99%] 3Track 02: 16 of 28 MB written (fifo 98%) [buf 99%] 4Track 02: 17 of 28 MB written (fifo 97%) [buf 99%] 4Track 02: 18 of 28 MB written (fifo 98%) [buf 99%] 3Track 02: 19 of 28 MB written (fifo 97%) [buf 99%] 4Track 02: 20 of 28 MB written (fifo 100%) [buf 99%] 4Track 02: 21 of 28 MB written (fifo 98%) [buf 99%] 4Track 02: 22 of 28 MB written (fifo 98%) [buf 99%] 3Track 02: 23 of 28 MB written (fifo 97%) [buf 99%] 4Track 02: 24 of 28 MB written (fifo 100%) [buf 99%] 4Track 02: 25 of 28 MB written (fifo 100%) [buf 99%] 3Track 02: 26 of 28 MB written (fifo 100%) [buf 99%] 4Track 02: 27 of 28 MB written (fifo 100%) [buf 99%] 4Track 02: 28 of 28 MB written (fifo 100%) [buf 99%] 4.0x.
Track 02: Total bytes read/written: 29945856/29945856 (14622 sectors).
Writing time: 8.282s
Average write speed 2.6x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 2.012s
/usr/bin/cdrecord.bin: fifo had 523 puts and 523 gets.
/usr/bin/cdrecord.bin: fifo was 0 times empty and 155 times full, min fill was 84%.
__________________
The journey is better then the destination

Last edited by whispersGhost; 3rd June 2008 at 12:32 AM.
Reply With Quote
Old 3rd June 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

That's it then, you can mount the disk.. it should have that file on it.. I'm not sure how one mounts a disk on Solaris so I'll leave the step to you. (I assume you know how..).
Reply With Quote
Old 3rd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default oh

So in other words you say it has been written to the disk?

look at this

http://bugs.opensolaris.org/view_bug.do?bug_id=1224356


i had tried stuff like mount /dev/dsk/c0t0d0s2 /cdrom
mount: /dev/dsk/c0t0d0s2 or /cdrom, no such file or directory

Dont worry you have helped me plenty
it is just a matter of mounting it now i guess,

You know between you me and the entire forum
i should have never moved so fast to Open Solaris.
i should have kept BSD as my Desktop
as i have it as my primary web server now

Solaris is so much more complex and i feel so dumb using it lol

i thought if i ejected it and put the disk in again
a folder would automaticly pop up and mount like it does with DVD disks with data on them.

But this time no such luck.
__________________
The journey is better then the destination

Last edited by whispersGhost; 3rd June 2008 at 01:02 AM.
Reply With Quote
Old 3rd June 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

Consider iostat -En, that should identify your drive.. or so Google claims.

Right about now, I'm not sure what you can do... I don't know why you went to Solaris, BSD is so much simpler.
Reply With Quote
Old 3rd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by BSDfan666 View Post
Consider iostat -En, that should identify your drive.. or so Google claims.

Right about now, I'm not sure what you can do... I don't know why you went to Solaris, BSD is so much simpler.

hi

See all that talking and helping me graduated you to a package Pilot.

No i know what i can do if i need to move back to BSD
i need to take all day and night moving my Data from at least one drive that is 500 gigs

The Other drives are backed up already so i am not worried about formatting them at all

iostat -En
c4d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Model: SAMSUNG HD501LJ Revision: Serial No: S0MUJDWQ251000 Size: 500.10GB <500101152768 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0
c5d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Model: SAMSUNG SP2504C Revision: Serial No: S09QJ1UYC25137 Size: 250.06GB <250058833920 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0
c6d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Model: WDC WD300AB-00B Revision: Serial No: WD-WMA7H1103830 Size: 30.02GB <30020272128 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0
c6d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Model: Maxtor 6L200P0 Revision: Serial No: L40NBTHH Size: 203.93GB <203928109056 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0
c7t1d0 Soft Errors: 0 Hard Errors: 6 Transport Errors: 0
Vendor: LITE-ON Product: DVDRW LH-20A1P Revision: KL0A Serial No:
Size: 18.80GB <18801491968 bytes>
Media Error: 0 Device Not Ready: 6 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
#



lol
__________________
The journey is better then the destination
Reply With Quote
Old 3rd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default Thanks

Quote:
Originally Posted by BSDfan666 View Post
Consider iostat -En, that should identify your drive.. or so Google claims.

Right about now, I'm not sure what you can do... I don't know why you went to Solaris, BSD is so much simpler.
hi

Thanks to you i am able to burn my DVD+RW.

Funny thing about the mount but when i rebooted my machine it automaticly mounted when i inserted the disk.
So i did not have to try and mount it lol

It never usually happened before with empty DVD+RW,
but now that we have something on it it was able to mount.

So i will practice with things like appending
data to the disk as well.

Thanks you for all your help
__________________
The journey is better then the destination
Reply With Quote
Old 3rd June 2008
whispersGhost's Avatar
whispersGhost whispersGhost is offline
Real Name: heather
Package Pilot
 
Join Date: May 2008
Location: ny
Posts: 168
Thanked 1 Time in 1 Post
Default i am sorry

[QUOTE=corey_james;4719]perhaps you should read this before posting again

http://daemonforums.org/showthread.p...ghlight=newbie

Corey

i was going to remove or redit the post myself.

i am sorry for yelling at you
i know you meant well in your own way.

Besides you never did argue with an idot and
i give you credit for that
__________________
The journey is better then the destination
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FreeBSD howto: burning and ripping cd's graudeejs Guides 9 31st December 2008 06:39 AM
shell: how to take part of the line... graudeejs Programming 8 6th September 2008 11:13 PM
CD Burning Software ninjatux FreeBSD Ports and Packages 7 17th July 2008 08:37 AM
trouble burning to dvdrw whispersGhost Solaris 2 21st May 2008 02:05 PM
HOWTO: BURNCD like DVD and CD CLI burning vermaden Guides 0 5th May 2008 10:45 AM


All times are GMT. The time now is 03:56 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick