DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD General

NetBSD General Other questions regarding NetBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 6th May 2008
PhotoJim PhotoJim is offline
Real Name: Jim M.
New User
 
Join Date: May 2008
Location: Regina, SK, CA
Posts: 7
Thanked 0 Times in 0 Posts
Default Your NetBSD hardware

Alright, I'll go first.

Sun Sparcstation 20
512 MB RAM
2 x 4.3 GB SCSI drives plus 1 4.3 GB Ultra-SCSI drive (external)
HappyMeal SBus NIC to give it 100BaseTX
SBus Ultra-SCSI controller card
Dual 180 MHz HyperSparc CPUs

I currently have it running headless just for fun. It's powerful enough that it might be okay with a GUI though.
Reply With Quote
  #2   (View Single Post)  
Old 6th May 2008
anomie's Avatar
anomie anomie is offline
Local
 
Join Date: Apr 2008
Location: Texas
Posts: 446
Thanked 69 Times in 46 Posts
Default

NetBSD 4.0 install:
  • Dell Latitude CPx
  • 128MB RAM
  • 10GB internal hard drive
  • PIII 500MHz
  • D-Link WNA-1330 wireless adapter

It's running IceWM, and I'm pretty happy with performance (considering the hardware).
__________________
Kill your t.v.
Reply With Quote
  #3   (View Single Post)  
Old 6th May 2008
s0xxx's Avatar
s0xxx s0xxx is offline
Package Pilot
 
Join Date: May 2008
Posts: 194
Thanked 47 Times in 22 Posts
Default

NetBSD-4 on Fujitsu Siemens v3515:

Code:
$ sysctl machdep.cpu_brand
machdep.cpu_brand = Intel(R) Celeron(R) M CPU        430  @ 1.73GHz

$ sysctl hw.physmem
hw.physmem = 1541591040

1x SATA I WD 60GB

$ X -version
XFree86 Version 4.5.0

$ fluxbox -v
Fluxbox 1.0.0 : (c) 2001-2007 Fluxbox Team
Just getting started, ath0 spits error, crapy via graphics (1024x768 atm), but lost of fun with NetBSD though!
Reply With Quote
  #4   (View Single Post)  
Old 15th May 2008
erno erno is offline
Port Guard
 
Join Date: May 2008
Location: Finland
Posts: 12
Thanked 1 Time in 1 Post
Default

MSI K9VGM-V
AMD Athlon 64 X2 4000+
2GB RAM
80GB Harddisk
NetBSD 4.0
Reply With Quote
  #5   (View Single Post)  
Old 16th May 2008
frob23's Avatar
frob23 frob23 is offline
New User
 
Join Date: May 2008
Posts: 1
Thanked 0 Times in 0 Posts
Default

NetBSD 4.0_STABLE
Pentium III @ 866Mhz
256MB RAM
ex0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
ep0: 3Com 3c595-TX 10/100 Ethernet
wd0: 28629 MB
wd1: 57220 MB

These are the basic stats for my router. It also acts as a backup machine using rsnapshot (and I try and make an archive of that once every few months if I remember) of my main machine's data excluding music and movies and such. It runs headless and I have a serial cable between it and the main machine in my house. I usually access it through ssh but I use the serial connection for networking issues and major upgrades.
__________________
Maybe you'll find direction, around some corner where it's been waiting to meet you.
What do you want me to do, to watch for you while you are sleeping?
Reply With Quote
  #6   (View Single Post)  
Old 22nd May 2008
FloridaBSD FloridaBSD is offline
Fdisk Soldier
 
Join Date: May 2008
Posts: 58
Thanked 0 Times in 0 Posts
Exclamation My NETBSD Giant If i could get it working

HP Pavillion a6230n Multimedia Desktop PC
Processor: AMD Athlon X2 Duel Core 5600+

Memory: 3GB PC6400 DDR

SDA 300gb SATAII wewstern Digital

SDB 400GB SATA Western Digital
Monitor (with Xwindows correctly configrued): Dell 2005FPW

Video: On Board: NiVidia NeForce 6300 SE (again X windows System cought it right)

Linksys WMP54G PCI (real Tek RT6.1v4.1 firm ware) Wirtles card installed coreectly from zero hour AND WORKING!!
[COLOR=Red]

PC BSD 1.54 Release derived from Free BSD 6.3 stable ( with the 7.0 ports tree as of tonight)



I am onn the hunt for a sub 250 dollar NVidia GeForce PCI E Graphiocs Processing Unit (Please pm me with the exact address of the vinder and the exact url for the GPU.


FreeBSD a3j 6.3-RELEASE FreeBSD 6.3-RELEASE #0: Thu Mar 20 17:11:11 EDT 2008 root@pcbsd:/usr/obj/usr/src/sys/PCBSD amd64


Thanks,

Florida
__________________
Google Linux is a Green Horns Best Friend (GHBF).
Windows = a 32 bit extensions to a 16 bit patch to an 8 bit operating system originally coded for a four bit processor written by 2-bit monopolistic software company founded by a .3-bit Harvard Drop out, who can't stand one respectable bit of competition.
If I believe something to be immoral a will not keep quite and let my voice of annoyance be heard loud and clear.
Reply With Quote
  #7   (View Single Post)  
Old 27th June 2008
tonyex's Avatar
tonyex tonyex is offline
Real Name: Anton
Port Guard
 
Join Date: May 2008
Location: Sweden
Posts: 14
Thanked 0 Times in 0 Posts
Default

1) Netbsd 4.0 on an Asus pundit:
http://asus.com/products.aspx?l1=1&l...84&modelmenu=1
2) NetBSD 4.0 on a fit-pc ( Oh, they are cute!):
http://www.fit-pc.com/new/
Reg /T
Reply With Quote
  #8   (View Single Post)  
Old 24th July 2008
replaced replaced is offline
Real Name: Adam Hoka
New User
 
Join Date: May 2008
Posts: 8
Thanked 0 Times in 0 Posts
Default

AMD Athlon 550MHz, AlphaServer DS10, AlphaStation 200
Reply With Quote
  #9   (View Single Post)  
Old 25th July 2008
morten42 morten42 is offline
Real Name: Morten
New User
 
Join Date: Jul 2008
Posts: 8
Thanked 0 Times in 4 Posts
Default

my video card is NVidia Quadro NVS 285
on 64 bit NetBSD.

the rest is AMD Opteron,
some pentium, some sparc and some AMD.

I have posted my problem on facebook.

and here

http://www.freebsdforums.com

but it looks more like a gay or minor lolita xxx site.

<admin@edry.com> does not respond.

It could happen to any site, but it can be prevented.
Reply With Quote
Old 4th August 2008
bdr bdr is offline
New User
 
Join Date: Aug 2008
Posts: 1
Thanked 0 Times in 0 Posts
Default

Hi!

Some time ago I trying to run NetBSD on PC Engines ALIX boards (Embedded boards designed for routers etc.). It works very well.
Attached Files
File Type: txt alix.1c.dmesg.txt (6.1 KB, 63 views)
File Type: txt alix.3c2.dmesg.txt (4.4 KB, 68 views)
Reply With Quote
Old 19th October 2008
mateo319 mateo319 is offline
New User
 
Join Date: Oct 2008
Posts: 8
Thanked 0 Times in 0 Posts
Default

NetBSD 4.0.1
Sony VAIO VGN-S560
1.86Ghz Centrino
100 GB HD
1GB RAM
Wireless, CD/DVD Burner
Reply With Quote
Old 18th April 2009
Graaf_van_Vlaanderen Graaf_van_Vlaanderen is offline
Port Guard
 
Join Date: Apr 2009
Posts: 10
Thanked 0 Times in 0 Posts
Default

NetBSD 4.0.1. AMD64 MP
HP DL360 G4 one Xeon 3.4GHz (1MB L2 cache),
2GB PC2700 ECC memory.
72.8GB SCSI.

Works fine, just still some issues with 'X' though.

Last edited by Graaf_van_Vlaanderen; 18th April 2009 at 10:34 PM. Reason: Forgot to add HD
Reply With Quote
Old 5th January 2012
bgalakazam bgalakazam is offline
New User
 
Join Date: Mar 2011
Location: California, USA
Posts: 3
Thanked 0 Times in 0 Posts
Default

NetBSD 5.1 ofppc
- 333 MHz POWER3-II 64-bit processor, 4 MB of L2 cache
- 512 MB of ECC SDRAM
- 18 GB Ultra3 SCSI HDD
- Two 10/100 Ethernet (IEEE 802.3 compliant)
- CD-ROM, Floppy, Tape Drive (I disconnected it, don’t need)

A bit of sweat, but installed and configured under a day. I am a FreeBSD user and this is my first exposure to NetBSD, so I hope I adapt fast.
Reply With Quote
Old 30th October 2014
muflon muflon is offline
Port Guard
 
Join Date: Jul 2013
Location: Poland
Posts: 44
Thanked 0 Times in 0 Posts
Default

From Day to Day duties/activities I work on my Hewlett-Packard workstation xw6200; with dual 64 bit Intel(R) Xeon(TM) CPU 3.00GHz, with 8 GB of the ECC memory. I turn off the HT.

I have build my own custom kernel, and now I'm doing research at that level [mostly [1]learning, [2]writing, [3]reading, go to [1] - and also experimenting with the Minix 3 that implements user space from NetBSD.

Last edited by muflon; 5 Days Ago at 06:01 PM.
Reply With Quote
Old 9th November 2014
kaludis's Avatar
kaludis kaludis is offline
Real Name: Alexander Bezsilko
New User
 
Join Date: Apr 2014
Location: Russia
Posts: 9
Thanked 0 Times in 0 Posts
Default

NetBSD 6.1.4 (CURRENT) amd64:
Asus P5KR
Intel(R) Core(TM) 2 Duo CPU E6550 @ 2.33GHz
4GB RAM
120GB HD
ATI Radeon™ HD 5450
Reply With Quote
Old 1 Week Ago
pawaan pawaan is offline
Fdisk Soldier
 
Join Date: Jan 2013
Posts: 64
Thanked 0 Times in 0 Posts
Default

NetBSD 7.0 BETA amd64 on HP 625
Code:
kern.version = NetBSD 7.0_BETA (GENERIC.201412092240Z)
dmesg
Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_BETA (GENERIC.201412092240Z)
total memory = 3836 MB
avail memory = 3709 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0xbf<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP 625 ( )
mainbus0 (root)
ACPI: RSDP 0xf2aa0 000014 (v00 HPQOEM)
ACPI: RSDT 0xafefe038 00003C (v01 HPQOEM SLIC-MPC 00000003      01000013)
ACPI: FACP 0xafefd000 000074 (v01 HPQOEM 307E     00000003 HP   00000001)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/tbfadt-664)
ACPI: DSDT 0xafede000 01B406 (v01 HPQOEM   SB700  00000001 INTL 20060912)
ACPI: FACS 0xafe8f000 000040
ACPI: APIC 0xafefc000 000084 (v01 HPQOEM 307E     00000001 HP   00000001)
ACPI: MCFG 0xafefb000 00003C (v01 HPQOEM 307E     00000001 HP   00000001)
ACPI: SLIC 0xafefa000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: HPET 0xafedb000 000038 (v01 HPQOEM 307E     00000001 HP   00000001)
ACPI: SSDT 0xafeda000 000386 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: AMD Athlon(tm) II P360 Dual-Core Processor, id 0x100f63
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1: AMD Athlon(tm) II P360 Dual-Core Processor, id 0x100f63
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000003>, AslId <    ,01000013>
ACPI Error: No handler for Region [ECRM] (0xfffffe813ed03740) [EmbeddedControl] (20131218/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131218/exfldio-323)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/psparse-553)
ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/uteval-113)
ACPI Error: No handler for Region [ECRM] (0xfffffe813ed03740) [EmbeddedControl] (20131218/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131218/exfldio-323)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/psparse-553)
ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/uteval-113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpivga0 at acpi0 (IGFX): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: 0 5 10 15 20 25 30 33 36 40 43 46 50 55 60 65 70 75 80 83 86 90 93 96 100
acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0210): ACPI Display Output Device
acpiout4 at acpivga0 (DD04, 0x0220): ACPI Display Output Device
acpiout5 at acpivga0 (DD05, 0x0230): ACPI Display Output Device
acpiout6 at acpivga0 (DD06, 0x0240): ACPI Display Output Device
acpiout7 at acpivga0 (DD07, 0x0250): ACPI Display Output Device
acpiout8 at acpivga0 (DD08, 0x0260): ACPI Display Output Device
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0, bios detect
acpivga0:   0x0220 (acpiout4): Unknown Output Device, head 0, bios detect
acpivga0:   0x0230 (acpiout5): Unknown Output Device, head 0, bios detect
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MBRL (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0177) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LIon rechargeable battery
acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (CPUZ): cpu0 cpu1
acpitz0: active cooling level 0: 88.0C
acpitz0: active cooling level 1: 80.0C
acpitz0: active cooling level 2: 69.0C
acpitz0: active cooling level 3: 57.0C
acpitz0: active cooling level 4: 48.0C
acpitz0: levels: critical 108.0 C, passive 100.0 C
acpitz1 at acpi0 (TZ3): cpu0 cpu1
acpitz1: levels: critical 108.0 C, passive 55.0 C, passive cooling
ACPI: Enabled 5 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.4
pms0: Extended W mode, Palm detect, Multi-finger Report
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x103c product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9712 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon Mobility HD 4200
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS690/780 HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 4 function 0: vendor 0x1022 product 0x9604 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb1: link is x1 @ 2.5Gb/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 78:e3:b5:49:13:b1
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 7 function 0: vendor 0x1022 product 0x9607 (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 9 function 0: vendor 0x1022 product 0x9608 (rev. 0x00)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb3: link is x1 @ 2.5Gb/s
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x4727 (miscellaneous network, revision 0x01) at pci4 dev 0 function 0 not configured
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xf732ff01<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
iic1 at piixpm0: I2C bus
iic2 at piixpm0: I2C bus
iic3 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Sigmatel 92HD88B1
hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg1: ADC01 2ch: Mic In [Jack]
hdafg1: ADC02 2ch: Mic In [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
ppb4 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci5 at ppb4 bus 7
pci5: i/o space, memory space enabled
ohci2 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ohci3 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb5 at ohci3: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci3
usb6 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  9900 mW, 2300 MHz
acpicpu0: P1: FFH, lat   4 us, pow  5973 mW, 1700 MHz
acpicpu0: P2: FFH, lat   4 us, pow  2177 mW,  800 MHz
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2295193690 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
uhub6 at usb6: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST9250315AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp       CDDVDW TS-L633R, R82M6GNB144255, 0300> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ubt0 at uhub2 port 4
ubt0: Broadcom Corp Broadcom 2070 Bluetooth, rev 2.00/4.81, addr 2
uvideo0 at uhub1 port 5 configuration 1 interface 0: Foxlink HP Webcam [2 MP Fixed], rev 2.00/1.06, addr 2
video0 at uvideo0: Foxlink HP Webcam [2 MP Fixed], rev 2.00/1.06, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic0 pin 18
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic0 pin 18
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic0 pin 18
info: [drm] Resetting GPU
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] Resetting GPU
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Your OpenBSD Hardware mfaridi OpenBSD General 73 2 Weeks Ago 01:29 AM
Hardware recommendation: what hardware to buy for my new FreeBSD desktop? Broodjegehaktmetmayo General Hardware 92 11th February 2009 10:43 PM
upgrading/new hardware from 4.0 knasbas OpenBSD Installation and Upgrading 1 7th January 2009 02:55 AM
What Sun hardware do you have revzalot General Hardware 7 22nd August 2008 01:44 PM
hardware not working Terminal-Chaos FreeBSD General 2 29th May 2008 05:32 AM


All times are GMT. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick