|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
temperature readings
Hi
I'm trying to display the temperatures of my laptop's motherboard, cpu1 and cpu2 but I don't understand the output of sysctl hw.sensors: hw.sensors.acpitz0.temp0=58.05 degC (zone temperature) hw.sensors.acpitz1.temp0=61.05 degC (zone temperature) hw.sensors.acpiac0.indicator0=On (power supply) hw.sensors.kate0.temp0=59.50 degC hw.sensors.kate0.temp1=59.00 degC hw.sensors.kate0.temp2=62.50 degC hw.sensors.kate0.temp3=57.75 degC which one is which? thank you and happy new year |
|
|||
While it certainly looks confusing, the related man pages document this information.
Quote:
Please post a dmesg in [code][/code] blocks, not for any specific reason.. just for my benefit. (I like dmesg's..) Hope that helps.. |
|
|||
Hi BSDfan666
Thank you. I'm new to BSD and I'm not used to look into the manual pages for obscure stuff like this. Code:
OpenBSD 4.4 (GENERIC.MP) #1812: Tue Aug 12 17:22:53 MDT 2008 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3341381632 (3186MB) avail mem = 3241144320 (3090MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (27 entries) bios0: vendor Hewlett-Packard version "F.21" date 02/28/2008 bios0: Hewlett-Packard HP Pavilion dv2700 Notebook PC acpi0 at bios0: rev 3 acpi0: tables DSDT FACP SLIC WDAT SRAT MCFG HPET APIC BOOT SSDT acpi0: wakeup devices LID0(S3) SLPB(S3) MAC0(S5) P2P0(S5) MCEB(S4) DVDB(S4) QPWB (S4) PICB(S4) VDOB(S4) LTVB(S4) MUSB(S4) KBD0(S3) PS2M(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 25000000 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Turion(tm) 64 X2 TL-60, 2000.53 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 1 6-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Turion(tm) 64 X2 TL-60, 2000.19 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 1 6-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P2P0) acpiprt2 at acpi0: bus 255 (XVR0) acpiprt3 at acpi0: bus 6 (XVR1) acpiprt4 at acpi0: bus 4 (XVR2) acpiec0 at acpi0 acpitz0 at acpi0: critical temperature 120 degC acpitz1 at acpi0: critical temperature 120 degC acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: SLPB acpibtn2 at acpi0: PWRB acpibat0 at acpi0: BAT0 not present acpiac0 at acpi0: AC unit online acpivideo at acpi0 not configured cpu0: PowerNow! K8 2000 MHz: speeds: 2000 1800 1600 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 "NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0 "NVIDIA MCP67 Host" rev 0xa2 nviic0 at pci0 dev 1 function 1 "NVIDIA MCP67 SMBus" rev 0xa2 iic0 at nviic0 iic1 at nviic0 spdmem0 at iic1 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic1 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM "NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured vendor "NVIDIA", unknown product 0x0543 (class processor subclass Co-processor, rev 0xa2) at pci0 dev 1 function 3 not configured ohci0 at pci0 dev 2 function 0 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int 11 (irq 1 1), version 1.0, legacy support ehci0 at pci0 dev 2 function 1 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int 7 (irq 7) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 4 function 0 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int 10 (irq 1 0), version 1.0, legacy support ehci1 at pci0 dev 4 function 1 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int 11 (irq 1 1) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 pciide0 at pci0 dev 6 function 0 "NVIDIA MCP67 IDE" rev 0xa1: DMA, channel 0 con figured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <Slimtype, DVD A DS8A1H, WH66> ATAPI 5/cdrom remov able cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) azalia0 at pci0 dev 7 function 0 "NVIDIA MCP67 HD Audio" rev 0xa1: apic 2 int 10 (irq 10) azalia0: codec[s]: Conexant/0x5051 audio0 at azalia0 ppb0 at pci0 dev 8 function 0 "NVIDIA MCP67 PCI" rev 0xa2 pci1 at ppb0 bus 1 "Ricoh 5C832 Firewire" rev 0x05 at pci1 dev 9 function 0 not configured sdhc0 at pci1 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2 int 10 (irq 11) sdmmc0 at sdhc0 "Ricoh 5C843 MMC" rev 0x12 at pci1 dev 9 function 2 not configured "Ricoh 5C592 Memory Stick" rev 0x12 at pci1 dev 9 function 3 not configured "Ricoh 5C852 xD" rev 0x12 at pci1 dev 9 function 4 not configured pciide1 at pci0 dev 9 function 0 "NVIDIA MCP67 SATA" rev 0xa2: DMA pciide1: using apic 2 int 5 (irq 5) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <FUJITSU MHY2250BH> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 nfe0 at pci0 dev 10 function 0 "NVIDIA MCP67 LAN" rev 0xa2: apic 2 int 11 (irq 1 1), address 00:1d:72:56:d4:09 eephy0 at nfe0 phy 1: Marvell 88E1118 Gigabit PHY, rev. 0 ppb1 at pci0 dev 12 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 pci2 at ppb1 bus 6 ppb2 at pci0 dev 13 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 pci3 at ppb2 bus 4 "Broadcom BCM4328" rev 0x03 at pci3 dev 0 function 0 not configured vga1 at pci0 dev 18 function 0 vendor "NVIDIA", unknown product 0x0531 rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) drm at vga1 unsupported pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev BH-G 2 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 mtrr: Pentium Pro MTRR support uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse1 at ums0 mux 0 uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics Co., Lt d. HP Webcam" rev 2.00/6.04 addr 3 video0 at uvideo0 softraid0 at root root on wd0a swap on wd0b dump on wd0b |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sysctl and cpu information and temperature | neurosis | FreeBSD General | 11 | 22nd October 2008 09:16 PM |
Why does smartctl show my temperature threshold is 0? | PeterSteele | FreeBSD General | 0 | 25th August 2008 03:33 PM |