|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
2D Graphics acceleration in X
Hi,
I'm trying to setup my ASUS ITX E35M-1 deluxe to work properly in X but there are some hickups and I don't really know how to look further. Symptoms: X works as it should but it is really slow. It's not the fastest hardware but even in an xterm when I issue the dmesg command I see text scrolling really slowly, like 5fps. (Currently I'm dual booting with a Debian, there X is behaving in an acceptable way, I have included the debian xorg.conf at the bottom if I try to apply it in OpenBSD I get an error: no screens found) So I guessed the radeon driver (It's an ati HD6310) wasn't loaded. After some reading here I found out /var/log/Xorg.0.log contains the working xorg.conf configuration. Reading through that apparently the radeon driver is loaded? Other symptoms I have I want to solve lateron but might be connected: The console is working well until I issue startx. If I go back with ctrl-alt-F1 or if I forcefully shutdown X with ctrl-alt-backspace, I get "no signal". If I blindly type "startx", X starts again but the console is gone. My question is: where do I need to start l looking now? I don't need 3d acceleration, just my desktop to act a bit more responsive than it is now would be nice. Also if my consoles would still work after I started X would be nice but is secondary at the moment. I'm using a generic OpenBSD 5.3/amd64. dmesg: Code:
$ dmesg OpenBSD 5.3 (GENERIC.MP) #62: Tue Mar 12 18:21:20 MDT 2013 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8164786176 (7786MB) avail mem = 7924944896 (7557MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9070 (52 entries) bios0: vendor American Megatrends Inc. version "1202" date 04/13/2011 bios0: ASUSTeK Computer INC. E35M1-I DELUXE acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT acpi0: wakeup devices SBAZ(S4) PS2K(S4) PS2M(S4) UAR1(S4) P0PC(S4) UHC1(S4) UHC2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) PE20(S4) PE21(S4) RLAN(S4) PE22(S4) PE23(S4) BR14(S4) PWRB(S4) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD E-350 Processor, 1600.18 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD E-350 Processor, 1599.94 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 3, remapped to apid 0 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318180 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PE20) acpiprt2 at acpi0: bus 7 (PE21) acpiprt3 at acpi0: bus 8 (PE22) acpiprt4 at acpi0: bus 9 (PE23) acpiprt5 at acpi0: bus -1 (BR15) acpiprt6 at acpi0: bus -1 (PCE6) acpiprt7 at acpi0: bus -1 (PCE7) acpiprt8 at acpi0: bus -1 (PCE8) acpiprt9 at acpi0: bus 1 (BR14) acpicpu0 at acpi0: C2, PSS acpicpu1 at acpi0: C2, PSS acpibtn0 at acpi0: PWRB cpu0: 1600 MHz: speeds: 1600 1280 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 vga1 at pci0 dev 1 function 0 "ATI Radeon HD 6310" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi azalia0: no supported codecs ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 vendor "PLX", unknown product 0x8604 rev 0xba pci2 at ppb1 bus 2 ppb2 at pci2 dev 1 function 0 vendor "PLX", unknown product 0x8604 rev 0xba: msi pci3 at ppb2 bus 3 ahci0 at pci3 dev 0 function 0 "Marvell 88SE9123 SATA" rev 0x11: msi, AHCI 1.0 ahci0: failed to start port, cannot probe PMP ahci0: device on port 0 didn't come ready, TFD: 0x150 ahci0: failed to start port, cannot softreset ahci0: unable to communicate with device on port 0 ahci0: failed to start port, cannot probe PMP ahci0: device on port 1 didn't come ready, TFD: 0x150 ahci0: failed to start port, cannot softreset ahci0: unable to communicate with device on port 1 scsibus0 at ahci0: 32 targets ppb3 at pci2 dev 5 function 0 vendor "PLX", unknown product 0x8604 rev 0xba: msi pci4 at ppb3 bus 4 ahci1 at pci4 dev 0 function 0 "Marvell 88SE9123 SATA" rev 0x11: msi, AHCI 1.0 scsibus1 at ahci1: 32 targets ahci2 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 0 int 19, AHCI 1.2 scsibus2 at ahci2: 32 targets sd0 at scsibus2 targ 0 lun 0: <ATA, FUJITSU MHW2080B, 891F> SCSI3 0/direct fixed naa.500000e04064ad79 sd0: 76319MB, 512 bytes/sector, 156301488 sectors sd1 at scsibus2 targ 1 lun 0: <ATA, WDC WD5000BEVT-0, 01.0> SCSI3 0/direct fixed naa.50014ee6ab01fb3d sd1: 476940MB, 512 bytes/sector, 976773168 sectors sd2 at scsibus2 targ 2 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed naa.50000f000b314563 sd2: 953869MB, 512 bytes/sector, 1953525168 sectors cd0 at scsibus2 targ 3 lun 0: <ATAPI, iHAS122, ZL0C> ATAPI 5/cdrom removable ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling iic0 at piixpm0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD10EADS-65L5B1> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 0 int 16 azalia1: codecs: Realtek/0x0892 audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci5 at ppb4 bus 5 ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 0 int 18, version 1.0, legacy support ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00 pci6 at ppb5 bus 6 athn0 at pci6 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 0 int 16 athn0: AR9285 rev 2 (1T1R), ROM rev 14, address e0:b9:a5:7e:f2:11 ppb6 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00 pci7 at ppb6 bus 7 re0 at pci7 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 0 int 17, address f4:6d:04:72:47:7c rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 ppb7 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00 pci8 at ppb7 bus 8 "NEC xHCI" rev 0x03 at pci8 dev 0 function 0 not configured ppb8 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00 pci9 at ppb8 bus 9 "NEC xHCI" rev 0x03 at pci9 dev 0 function 0 not configured ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, version 1.0, legacy support ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17 usb2 at ehci2: USB revision 2.0 uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 usb3 at ohci0: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci1: USB revision 1.0 uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 usb5 at ohci2: USB revision 1.0 uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb6 at ohci3: USB revision 1.0 uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 mtrr: Pentium Pro MTRR support uhidev0 at uhub3 port 5 configuration 1 interface 0 "Logitech Logitech USB Keyboard" rev 1.10/28.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub6 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 ugen0 at uhub6 port 3 "Atheros Communications AR3011" rev 1.10/2.00 addr 3 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (b96c29bed200663d.a) swap on sd0b dump on sd0b wsmouse0 detached ums0 detached uhidev1 detached uhidev1 at uhub6 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 wsmouse0 detached ums0 detached uhidev1 detached uhidev1 at uhub6 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 wsmouse0 detached ums0 detached uhidev1 detached uhidev1 at uhub6 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 wsmouse0 detached ums0 detached uhidev1 detached uhidev1 at uhub6 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 wsmouse0 detached ums0 detached uhidev1 detached uhidev1 at uhub6 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 wsmouse0 detached ums0 detached uhidev1 detached uhidev1 at uhub6 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 $ /usr/sbin/pcidump Code:
Domain /dev/pci0: 0:0:0: AMD AMD64 14h Host 0:1:0: ATI Radeon HD 6310 0:1:1: ATI Radeon HD 6310 HD Audio 0:4:0: AMD AMD64 14h PCIE 0:17:0: ATI SBx00 SATA 0:18:0: ATI SB700 USB 0:18:2: ATI SB700 USB2 0:19:0: ATI SB700 USB 0:19:2: ATI SB700 USB2 0:20:0: ATI SBx00 SMBus 0:20:1: ATI SB700 IDE 0:20:2: ATI SBx00 HD Audio 0:20:3: ATI SB700 ISA 0:20:4: ATI SB600 PCI 0:20:5: ATI SB700 USB 0:21:0: ATI SB800 PCIE 0:21:1: ATI SB800 PCIE 0:21:2: ATI SB800 PCIE 0:21:3: ATI SB800 PCIE 0:22:0: ATI SB700 USB 0:22:2: ATI SB700 USB2 0:24:0: AMD AMD64 14h Link Cfg 0:24:1: AMD AMD64 14h Address Map 0:24:2: AMD AMD64 14h DRAM Cfg 0:24:3: AMD AMD64 14h Misc Cfg 0:24:4: AMD AMD64 14h CPU Power 0:24:5: AMD AMD64 14h Reserved 0:24:6: AMD AMD64 14h NB Power 0:24:7: AMD AMD64 14h Reserved 1:0:0: PLX unknown 2:1:0: PLX unknown 2:5:0: PLX unknown 3:0:0: Marvell 88SE9123 SATA 4:0:0: Marvell 88SE9123 SATA 6:0:0: Atheros AR9285 7:0:0: Realtek 8168 8:0:0: NEC xHCI 9:0:0: NEC xHCI Code:
Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" RightOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri2" Load "dbe" Load "dri" Load "glx" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:0:1:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:0:1:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:0:1:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card2" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Intel graphics | tolstoi | NetBSD General | 5 | 20th February 2013 08:10 AM |
Good graphics card for FreeBSD? | Sunnz | FreeBSD General | 12 | 4th May 2009 01:44 PM |
Is 3d acceleration available with Intel GMA 3100 (AM64)? | ghost77 | FreeBSD General | 5 | 12th January 2009 11:18 AM |
Wine + Flash graphics problems | m8rsh | FreeBSD General | 0 | 25th November 2008 10:12 PM |
nwn failed to initialize graphics | maxrussell | FreeBSD General | 8 | 22nd November 2008 08:52 PM |