DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
Old 15th March 2013
LeFrettchen's Avatar
LeFrettchen LeFrettchen is offline
Marveled user
 
Join Date: Aug 2012
Location: France
Posts: 405
Default

Today, I received my "new" workstation : Sun Blade 2500

1 UltraSPARC IIIi @ 1.28GHz,
4 x 1Gb RAM,
Sun XVR-600.

But no HDD, and no CD-DRIVE, so no OBSD install today

Tomorrow, I'll take and post some pictures...
Reply With Quote
Old 19th March 2013
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Default

My iBook G4 is so happy with Puffy :-)
Theo & Puffy Team : Thank you so much !!

dmesg:
Code:
[ using 501268 bytes of bsd ELF symbol table ]
console out [ATY,Via_A]console in [keyboard] , using ADB
using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.3 (GENERIC) #36: Tue Mar 12 20:52:24 MDT 2013
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1342177280 (1280MB)
avail mem = 1287770112 (1228MB)
mainbus0 at root: model PowerBook6,5
cpu0 at mainbus0: 7447A (Revision 0x101): 1066 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: no EEPROM found
spdmem1 at mem0: 1GB DDR SDRAM non-parity PC2700CL2.5
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
adt0 at iic0 addr 0xae: adt7467 rev 0x71
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
appleagp0 at pchb0
agp0 at appleagp0: aperture at 0x0, size 0x10000000
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address 00:0d:93:ee:95:91
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9 irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
dfs0 at macgpio0 offset 0x6b: speeds: 1066, 533 MHz
"gpio4" at macgpio0 offset 0x1e not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"gpio11" at macgpio0 offset 0x75 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 0% charged
piic0 at adb0
iic1 at piic0
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8123, CA0T> ATAPI 5/cdrom removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
audio0 at snapper0
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci2: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci3: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci4: USB revision 1.0
uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <HTS421260H9AT00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:b3:df:b0
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a (5bf2d6abe0cbee49.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
WARNING: clock lost 9822 days, using FS time -- CHECK AND RESET THE DATE!
rum0 at uhub0 port 1 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e
ehci_idone: ex=0xe010cc00 is done!
rum0 detached
umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable serial.0951160300000000022B
sd0: 953MB, 512 bytes/sector, 1952768 sectors
sd0 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable serial.0951160300000000022B
sd0: 953MB, 512 bytes/sector, 1952768 sectors
Code:
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
Actually , I had a problem configuring my airport extreme as Puffy keeps sending unlimited blue lines that end nowhere .. but this is not an excuse to go back using old tiger .. lucky having rum ..

Last edited by daemonfowl; 21st March 2013 at 12:49 AM. Reason: +bwi issue
Reply With Quote
Old 20th March 2013
zizzo zizzo is offline
New User
 
Join Date: Dec 2010
Location: Great NW, USA
Posts: 2
Default

So I listed my hardware setups running OpenBSD in this thread back in 2010 when I was starting out. Since then, I have moved away from the older single-core Athlon XP CPUs (except my trusty XP 2900) and replaced my dev setup with Core2Quad Q8200 & Core2Duo E8400 machines.

With these I am running pf along with DHCP & BIND and wireless on a separate subnet. I have added Squid & SquidGuard to the mix and I am currently evaluating NoSQL dBs to add.


So here is the current list - all running OpenBSD 5.2 / i386:

Physical boxes:
Core2Quad Q8200 w/4GB + 128GB SSD - this is my ports build box

Core2Duo E8400 w/4GB + 40GB SSD + Syba Dual-GigabitE NIC + wireless - firewall

Celeron 847 (Sandy Bridge 1.1GHz) m-ITX w/Dual-GigabitE NIC + wireless + 6GB SATA SSD - firewall appliance dev

This thing is really fast when it comes to disk I/O. The other Core2 boxes have 3GB SATA and only 1 has AHCI. When I do a squidGuard dB rebuild - systat reports about 30M/s on mechanical HDD (takes 20+ min) and 60MB/s on SSD (takes 8-10min). The E8400 will do 115MB/s sustaned during the rebuild (takes about 2min). When I get to the Cel 847 mentioned above with 6GB SATA and AHCI - I get 180MB/s sustained during the dB rebuild (takes 1m 10sec). Quite impressive indeed.

Last edited by zizzo; 21st March 2013 at 12:14 PM.
Reply With Quote
Old 1st April 2013
LeFrettchen's Avatar
LeFrettchen LeFrettchen is offline
Marveled user
 
Join Date: Aug 2012
Location: France
Posts: 405
Default

I installed OpenBSD 5.3 snapshots on my Sun Blade 2500.

OpenBoot PROM 4.17.1 ok

dmesg :
Code:
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.3 (GENERIC) #37: Fri Mar  1 12:03:14 MST 2013
    deraadt@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 4294967296 (4096MB)
avail mem = 4213784576 (4018MB)
mainbus0 at root: Sun Blade 2500
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 2.4) @ 1280 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Tomatillo", version 4, ign 700, bus A 0 to 0
schizo0: dvma map c0000000-dfffffff
pci0 at schizo0
bge0 at pci0 dev 3 function 0 "Broadcom BCM5703" rev 0x00, BCM5702/5703 A2 (0x1002): ivec 0x71c, address 00:03:ba:8c:19:6b
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
"ppm" at mainbus0 not configured
schizo1 at mainbus0: "Tomatillo", version 4, ign 740, bus B 0 to 0
schizo1: dvma map c0000000-dfffffff
pci1 at schizo1
siop0 at pci1 dev 4 function 0 "Symbios Logic 53c1010-66" rev 0x01: ivec 0x769, using 8K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAJ3364MC, 3702> SCSI2 0/direct fixed serial.FUJITSU_MAJ3364MC_00000479
sd0: 34858MB, 512 bytes/sector, 71390320 sectors
siop1 at pci1 dev 4 function 1 "Symbios Logic 53c1010-66" rev 0x01: ivec 0x768, using 8K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
schizo2 at mainbus0: "Tomatillo", version 4, ign 780, bus A 0 to 1
schizo2: dvma map c0000000-dfffffff
pci2 at schizo2
ebus0 at pci2 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"flashprom" at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: m5823
pcfiic0 at ebus0 addr 320-321 ivec 0x2e
iic0 at pcfiic0
"SUNW,i2c-imax" at iic0 addr 0x9 not configured
"pca9556" at iic0 addr 0x18 not configured
admtt0 at iic0 addr 0x2c
admtt1 at iic0 addr 0x2e
"fm3560" at iic0 addr 0x37 not configured
"fm3560" at iic0 addr 0x4e not configured
spdmem0 at iic0 addr 0x5b: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x5c: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem2 at iic0 addr 0x5d: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem3 at iic0 addr 0x5e: 1GB DDR SDRAM registered ECC PC2300CL2.5
"ics951601" at iic0 addr 0x69 not configured
power0 at ebus0 addr 800-82f ivec 0x20
com0 at ebus0 addr 3f8-3ff ivec 0x2c: ns16550a, 16 byte fifo
com1 at ebus0 addr 2e8-2ef ivec 0x2c: ns16550a, 16 byte fifo
"dma" at ebus0 addr 0-ffff not configured
alipm0 at pci2 dev 6 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz clock
iic1 at alipm0
"scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs
autri0 at pci2 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x02: ivec 0x7a4
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
ohci0 at pci2 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7a7, version 1.0, legacy support
ohci1 at pci2 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7a6, version 1.0, legacy support
pciide0 at pci2 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x798 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <ASUS, CRW-5232AS, 1.0> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci2 dev 4 function 0 "TI PCI2250 PCI-PCI" rev 0x02
pci3 at ppb0 bus 1
ohci2 at pci3 dev 8 function 0 "NEC USB" rev 0x43: ivec 0x794, version 1.0
ohci3 at pci3 dev 8 function 1 "NEC USB" rev 0x43: ivec 0x795, version 1.0
ehci0 at pci3 dev 8 function 2 "NEC USB" rev 0x04: ivec 0x796
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
"TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 11 function 0 not configured
usb1 at ohci2: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci3: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
"ppm" at mainbus0 not configured
schizo3 at mainbus0: "Tomatillo", version 4, ign 7c0, bus B 0 to 0
schizo3: dvma map c0000000-dfffffff
pci4 at schizo3
ifb0 at pci4 dev 2 function 0 "3D Labs Wildcat 5110" rev 0x01
ifb0: XVR-600 (SUNW,375-3153), 1280x1024
wsdisplay0 at ifb0 mux 1: console (std, sun emulation)
"i2c" at mainbus0 not configured
siop0: target 0 now using tagged DT 16 bit 80.0 MHz 62 REQ/ACK offset xfers
uhidev0 at uhub4 port 1 configuration 1 interface 0 "vendor 0x04f3 product 0x0103" rev 2.00/1.07 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "vendor 0x04f3 product 0x0103" rev 2.00/1.07 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1d,700000/scsi@4,0/disk@0,0
root on sd0a (0748731b9b78af04.a) swap on sd0b dump on sd0b
Everything works, but the shell screen is awful, black text on white screen.
And the Sun XVR600 graphic card can display 1900x1020, but only works in 8-bit mode, ans is REALLY SLOW

Ethernet ok
IDE CDROM ok
Generic USB keyboard ok
Generic USB mouse ok

Installed a Fujitsu SCSI Ultra160 HDD, ok

Tried some environnements :
startx fvwm passed
xfce4 passed
kde failed

KDE can be launched, but I only get the splash-screen and the mouse cursor, and nothing else.
No login screen, no waiting mouse cursor, and nothing else !
Now I must dig the log...
Reply With Quote
Old 29th April 2013
a4lm a4lm is offline
New User
 
Join Date: Mar 2011
Posts: 5
Default

My current hw:

over powered firewall acting as 'AIO-server'
em0 connected to vhdsl2 modem with 100/10 connection,
em1 1gb switch for local net, and run0 as a backup connection into 4g lte modem.
I plugged in re0 for testing only, and forgot it there.
Code:
OpenBSD 5.3-current (GENERIC.MP) #0: Tue Apr 23 23:25:31 EEST 2013
    root@tfort.local.lan:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2120810496 (2022MB)
avail mem = 2056704000 (1961MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.2 @ 0xf0800 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/17/2008
bios0: OEM OEM
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG APIC SSDT
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) HUB0(S5) UAR1(S5) UAR2(S5) IGBE(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC1(S3) EHC2(S3) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2400.37 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 309MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2784.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 4MB 64b/line 16-way L2 cache
cpu2 at mainbus0: apid 3 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2784.00 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu2: 4MB 64b/line 16-way L2 cache
cpu3 at mainbus0: apid 1 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2784.00 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu3: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus 2 (PEX1)
acpiprt3 at acpi0: bus 3 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 4 (HUB0)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpitz0 at acpi0: critical temperature is 70 degC
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2400, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
intel_overlay_map_regs partial stub
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82Q965 Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 4 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 4 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 4 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC260
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: msi, address 00:03:1d:05:c6:be
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: msi, address 00:03:1d:05:c6:bf
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 4 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 4 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 4 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 4 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 4
pcib0 at pci4 dev 6 function 0 vendor "Winbond", unknown product 0x0628 rev 0x00
ohci0 at pci4 dev 13 function 0 "NEC USB" rev 0x43: apic 4 int 19, version 1.0, legacy support
ohci1 at pci4 dev 13 function 1 "NEC USB" rev 0x43: apic 4 int 16, version 1.0, legacy support
ehci2 at pci4 dev 13 function 2 "NEC USB" rev 0x04: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "NEC EHCI root hub" rev 2.00/1.00 addr 1
re0 at pci4 dev 14 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), apic 4 int 18, address c8:3a:35:d8:ec:0b
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x4e/2: W83627DHG rev 0x25
lm1 at wbsio0 port 0x290/8: W83627DHG
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
pcib1 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, WDC WD3200AAKS-0, 12.0> SCSI3 0/direct fixed naa.50014ee1009b166c
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 4 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
usb5 at uhci0: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci1: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci2: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb8 at uhci3: USB revision 1.0
uhub8 at usb8 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb9 at uhci4: USB revision 1.0
uhub9 at usb9 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa at pcib1 not configured
mtrr: Pentium Pro MTRR support
run0 at uhub1 port 4 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address 00:1c:f0:99:3f:a3
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Lite-On Technology Corp. HP Basic USB Keyboard" rev 1.10/1.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (14f181a4b15719c3.a) swap on sd0b dump on sd0b
main desktop
Code:
OpenBSD 5.3-current (GENERIC.MP) #2: Tue Apr 23 19:12:57 EEST 2013
    root@tfort.local.lan:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8530690048 (8135MB)
avail mem = 8295895040 (7911MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfc890 (29 entries)
bios0: vendor American Megatrends Inc. version "1.25.2415" date 06/25/2010
bios0: FUJITSU ESPRIMO P1510
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET SSDT
acpi0: wakeup devices P0P4(S4) P0P5(S4) P0P6(S4) BR1E(S4) PS2K(S4) PS2M(S4) EUSB(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) GBE_(S4) BR20(S4) BR21(S4) BR22(S4) BR23(S4) BR24(S4) BR25(S4) BR26(S4) BR27(S4) P0P1(S4) P0P3(S4) USBE(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.42 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu4: 256KB 64b/line 8-way L2 cache
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu5: 256KB 64b/line 8-way L2 cache
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu6: 256KB 64b/line 8-way L2 cache
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu7: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 8
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (BR1E)
acpiprt2 at acpi0: bus 2 (BR20)
acpiprt3 at acpi0: bus -1 (BR21)
acpiprt4 at acpi0: bus -1 (BR22)
acpiprt5 at acpi0: bus -1 (BR23)
acpiprt6 at acpi0: bus 3 (BR24)
acpiprt7 at acpi0: bus 4 (BR25)
acpiprt8 at acpi0: bus -1 (BR26)
acpiprt9 at acpi0: bus -1 (BR27)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpicpu4 at acpi0: C3, C2, C1, PSS
acpicpu5 at acpi0: C3, C2, C1, PSS
acpicpu6 at acpi0: C3, C2, C1, PSS
acpicpu7 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2926 MHz: speeds: 2934, 2933, 2800, 2667, 2533, 2400, 2267, 2133, 2000, 1867, 1733, 1600, 1467, 1333, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 5670" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5600 Audio" rev 0x00: msi
azalia0: no supported codecs
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 8 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia1: codecs: Realtek ALC888, Intel/0x2804, using Realtek ALC888
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb3 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 8 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci5 at ppb4 bus 5
re0 at pci5 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), apic 8 int 16, address c8:3a:35:da:0b:89
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
re1 at pci5 dev 1 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd (0x1800), apic 8 int 17, address 6c:62:6d:8d:c0:13
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
pcib0 at pci0 dev 31 function 0 "Intel H55 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, BD-RE BH30N, 1.02> ATAPI 5/cdrom removable
sd0 at scsibus0 targ 2 lun 0: <ATA, ST31500541AS, CC35> SCSI3 0/direct fixed naa.5000c5002ad1e776
sd0: 1430799MB, 512 bytes/sector, 2930277168 sectors
cd1 at scsibus0 targ 3 lun 0: <Optiarc, DVD RW AD-7250H, 1.81> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 8 int 18
iic0 at ichiic0
iic0: addr 0x28 01=00 02=00 03=00 04=01 05=80 06=00 07=03 41=00 42=00 43=00 44=01 45=80 46=00 47=03 81=00 82=00 83=00 84=01 85=80 86=00 87=03 c1=00 c2=00 c3=00 c4=01 c5=80 c6=00 c7=03 words 00=ff00 01=0000 02=0000 03=00ff 04=01ff 05=80ff 06=00ff 07=ffff
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 4 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/51.95 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 0/direct removable
sd2 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0 0/direct removable
sd3 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd4 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0 0/direct removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (4ae412dcefa0a69d.a) swap on sd0b dump on sd0b
Got 3 of these around, mainly for reading man pages or browsing at kitchen or such.
Also identical in between each other for running ooold current
Code:
OpenBSD 5.3 (GENERIC.MP) #49: Tue Feb 26 09:07:33 MST 2013
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 1.20 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
real mem  = 1064693760 (1015MB)
avail mem = 1036288000 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/22/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.4 @ 0xf4724 (21 entries)
bios0: vendor Hewlett-Packard version "68YOP Ver. F.0A" date 01/22/2007
bios0: Hewlett-Packard HP Compaq nc2400(#ABU)
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices C094(S5) C1DE(S5) C0EF(S3) C0F6(S3) C0F7(S3) C0F8(S3) C0F9(S3) C100(S5) C1EA(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 1.20 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 2 (C094)
acpiprt1 at acpi0: bus 8 (C100)
acpiprt2 at acpi0: bus 0 (C002)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: C1D6
acpipwrres1 at acpi0: C2C9
acpipwrres2 at acpi0: C2CA
acpipwrres3 at acpi0: C2CB
acpipwrres4 at acpi0: C2CC
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 105 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: C1B6 model "Primary" serial 32984 2008/03/07 type LIon oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C1F1
acpibtn1 at acpi0: C1EE
acpivideo0 at acpi0: C081
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1800
cpu0: Enhanced SpeedStep 1198 MHz: speeds: 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int 22
pci1 at ppb0 bus 8
8:0:0: mem address conflict 0xf0000000/0x1000
wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:19:d2:6f:2a:fd
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 22
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 22
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): apic 1 int 17, address 00:1b:24:02:4d:5a
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
cbb0 at pci2 dev 9 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
"TI PCIXX12 FireWire" rev 0x00 at pci2 dev 9 function 1 not configured
"TI PCIXX12 Smart Card" rev 0x00 at pci2 dev 9 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4008GAH>
wd0: 16-sector PIO, LBA48, 38147MB, 78126048 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-842S, 1.10> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (ac03c805b70d295d.a) swap on wd0b dump on wd0b
Reply With Quote
Old 27th September 2013
richardet richardet is offline
Real Name: Richard Thornton
New User
 
Join Date: Sep 2013
Location: Princeton, NJ
Posts: 6
Default

Sun Blade 100 @ 500 mhz
OpenBSD 5.3
2 GB of Ram
(2) 15 GB disks
I originally used Solaris 9 on this machine back in 2003.
Reply With Quote
Old 6th October 2013
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 7,975
Default

I moved my home, recently, and took the opportunity to install a new pair of low power, solid-state OpenBSD firewalls when I made the transition. The outer LAN's availability is managed by ifstated(8), the inner LAN uses carp(4). The firewalls keep pf(4) and dhcpd(8) in sync via Ethernet crossover.

Left to right on the shelf: a switch for the outer LAN, a cable modem, a pair of PC Engines Alix2d13 systems running OpenBSD, a switch for the inner LAN, and a wireless AP. This photo is being served to you from one of the Alix machines..


Last edited by jggimi; 6th October 2013 at 10:36 PM.
Reply With Quote
Old 13th December 2013
hanzer's Avatar
hanzer hanzer is offline
Real Name: Adam Jensen
just passing through
 
Join Date: Oct 2013
Location: EST USA
Posts: 314
Default Proliant ML370 G4

I recently acquired an HP-Proliant ML370-G4 with a PCI-X Smart Array 6404 SCSI U320 controller card that has a 192MB cache. It currently has two 146GB U320 10kRPM drives configured as a RAID0 array. I plan to add four more 146GB drives configured as a RAID5 array (it has a six disk drive cage).

http://pastebin.com/BTV4atTD

The machine is built like a tank - redundant power supplies, ECC RAM throughout, hot-swap drives, six hot-swap fans, SDLT320 tape drive, etc. The quality of the hardware and thoughtfulness of the design are very impressive, especially considering that I snagged this sweet box for $200. OpenBSD is a perfect fit.

Last edited by ocicat; 13th December 2013 at 01:50 AM. Reason: Your account has been enabled to post URL's.
Reply With Quote
Old 8th July 2014
pcronin pcronin is offline
Port Guard
 
Join Date: May 2012
Posts: 19
Default

I just recieved my new (to me) machine. A nice Dell 1U labeled as PowerEdge C1100.

Code:
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar  5 09:37:46 MST 2014
    deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 25743458304 (24550MB)
avail mem = 25049563136 (23889MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9e000 (81 entries)
bios0: vendor Dell Computer Corporation version "DS993B22" date 06/21/2012
bios0: Dell CS24-TY
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC SPCR MCFG SSDT OEMB HPET SSDT EINJ BERT ERST HEST
acpi0: wakeup devices P0P1(S4) UAR1(S4) UAR2(S4) USB0(S4) EUSB(S4) GBE_(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) GBE3(S5) P0P9(S4) GBE4(S5) NPE1(S5) NPE2(S5) NPE3(S5) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.69 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 9, package 0
cpu3 at mainbus0: apid 20 (application processor)
cpu3: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.42 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 10, package 0
cpu4 at mainbus0: apid 32 (application processor)
cpu4: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 0, package 1
cpu5 at mainbus0: apid 34 (application processor)
cpu5: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.42 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 0, core 1, package 1
cpu6 at mainbus0: apid 50 (application processor)
cpu6: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.42 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 9, package 1
cpu7 at mainbus0: apid 52 (application processor)
cpu7: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 0, core 10, package 1
cpu8 at mainbus0: apid 1 (application processor)
cpu8: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu8: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu8: 256KB 64b/line 8-way L2 cache
cpu8: smt 1, core 0, package 0
cpu9 at mainbus0: apid 3 (application processor)
cpu9: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu9: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu9: 256KB 64b/line 8-way L2 cache
cpu9: smt 1, core 1, package 0
cpu10 at mainbus0: apid 19 (application processor)
cpu10: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu10: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu10: 256KB 64b/line 8-way L2 cache
cpu10: smt 1, core 9, package 0
cpu11 at mainbus0: apid 21 (application processor)
cpu11: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu11: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu11: 256KB 64b/line 8-way L2 cache
cpu11: smt 1, core 10, package 0
cpu12 at mainbus0: apid 33 (application processor)
cpu12: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu12: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu12: 256KB 64b/line 8-way L2 cache
cpu12: smt 1, core 0, package 1
cpu13 at mainbus0: apid 35 (application processor)
cpu13: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu13: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu13: 256KB 64b/line 8-way L2 cache
cpu13: smt 1, core 1, package 1
cpu14 at mainbus0: apid 51 (application processor)
cpu14: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu14: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu14: 256KB 64b/line 8-way L2 cache
cpu14: smt 1, core 9, package 1
cpu15 at mainbus0: apid 53 (application processor)
cpu15: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz
cpu15: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu15: 256KB 64b/line 8-way L2 cache
cpu15: smt 1, core 10, package 1
ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 4, remapped to apid 6
ioapic1 at mainbus0: apid 7 pa 0xfec8a000, version 20, 24 pins
ioapic1: misconfigured as apic 6, remapped to apid 7
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P0P1)
acpiprt2 at acpi0: bus -1 (P0P8)
acpiprt3 at acpi0: bus -1 (P0P9)
acpiprt4 at acpi0: bus 1 (NPE1)
acpiprt5 at acpi0: bus 2 (NPE2)
acpiprt6 at acpi0: bus 3 (NPE3)
acpiprt7 at acpi0: bus -1 (NPE4)
acpiprt8 at acpi0: bus -1 (NPE5)
acpiprt9 at acpi0: bus -1 (NPE6)
acpiprt10 at acpi0: bus 4 (NPE7)
acpiprt11 at acpi0: bus -1 (NPE8)
acpiprt12 at acpi0: bus 5 (NPE9)
acpiprt13 at acpi0: bus -1 (NPEA)
acpiprt14 at acpi0: bus 6 (P0P4)
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpicpu4 at acpi0: C3, C1, PSS
acpicpu5 at acpi0: C3, C1, PSS
acpicpu6 at acpi0: C3, C1, PSS
acpicpu7 at acpi0: C3, C1, PSS
acpicpu8 at acpi0: C3, C1, PSS
acpicpu9 at acpi0: C3, C1, PSS
acpicpu10 at acpi0: C3, C1, PSS
acpicpu11 at acpi0: C3, C1, PSS
acpicpu12 at acpi0: C3, C1, PSS
acpicpu13 at acpi0: C3, C1, PSS
acpicpu14 at acpi0: C3, C1, PSS
acpicpu15 at acpi0: C3, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2134, 2133, 2000, 1867, 1733, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x22
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x22: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x22: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x22: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x22: msi
pci4 at ppb3 bus 4
ppb4 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x22: msi
pci5 at ppb4 bus 5
"Intel X58 IOxAPIC" rev 0x22 at pci0 dev 19 function 0 not configured
"Intel X58 Misc" rev 0x22 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x22 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x22 at pci0 dev 20 function 2 not configured
"Intel X58 Throttle" rev 0x22 at pci0 dev 20 function 3 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 23
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 22
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi
pci6 at ppb5 bus 6
em0 at pci6 dev 0 function 0 "Intel 82576" rev 0x01: msi, address 
em1 at pci6 dev 0 function 1 "Intel 82576" rev 0x01: msi, address 
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 22
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 21
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci7 at ppb6 bus 7
vga1 at pci7 dev 11 function 0 "ASPEED Technology AST2000" rev 0x10
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 6 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD2502ABYS-18B7A0>
wd0: 16-sector PIO, LBA48, 238418MB, 488281250 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 6 int 18
iic0 at ichiic0
iic0: addr 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 6 int 19 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25
wbsio0 port 0xa10/2 not configured
uhidev0 at uhub0 port 4 configuration 1 interface 0 "Avocent USB Composite Device-0" rev 2.00/0.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 4 configuration 1 interface 1 "Avocent USB Composite Device-0" rev 2.00/0.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev2 at uhub0 port 4 configuration 1 interface 2 "Avocent USB Composite Device-0" rev 2.00/0.00 addr 2
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse2 at ums1 mux 0
uhub8 at uhub1 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
uhub9 at uhub8 port 4 "Logitech Logitech G15 Keyboard" rev 1.10/1.03 addr 3
uhidev3 at uhub9 port 1 configuration 1 interface 0 "Logitech Logitech Gaming Keyboard" rev 2.00/1.70 addr 4
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub9 port 1 configuration 1 interface 1 "Logitech Logitech Gaming Keyboard" rev 2.00/1.70 addr 4
uhidev4: iclass 3/0, 3 report ids
uhid0 at uhidev4 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev4 reportid 2: input=7, output=0, feature=0
uhid2 at uhidev4 reportid 3: input=1, output=20, feature=1
uhidev5 at uhub9 port 3 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 5
uhidev5: iclass 3/1
ums2 at uhidev5: 3 buttons, Z dir
wsmouse3 at ums2 mux 0
uhidev6 at uhub9 port 4 configuration 1 interface 0 "G15 Keyboard G15 Keyboard" rev 2.00/1.03 addr 6
uhidev6: iclass 3/0, 3 report ids
uhid3 at uhidev6 reportid 1: input=8, output=0, feature=0
uhid4 at uhidev6 reportid 2: input=8, output=18, feature=3
uhid5 at uhidev6 reportid 3: input=0, output=991, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (00182b74aa50c72c.a) swap on wd0b dump on wd0b
arp info overwritten for 192.168.0.26 by 80:1f:02:cc:67:9f on em0
Going to have to find a decent video card for it.
Reply With Quote
Old 8th July 2014
ibara ibara is offline
OpenBSD language porter
 
Join Date: Jan 2014
Posts: 783
Default

I know there is a PCIe-2.0 x16 on it... but is there enough room to fit a video card?
Anyhow, make sure to get a Radeon.
Reply With Quote
Old 20th July 2014
pcronin pcronin is offline
Port Guard
 
Join Date: May 2012
Posts: 19
Default

Quote:
Originally Posted by ibara View Post
I know there is a PCIe-2.0 x16 on it... but is there enough room to fit a video card?
Anyhow, make sure to get a Radeon.
Seems to be enough for at least a "sane" card. Been a long time since I've looked into video cards for PCs at all, let alone tracking down *nix supported cards. Time to hit the forums
Reply With Quote
Old 4th December 2014
pawaan pawaan is offline
Fdisk Soldier
 
Join Date: Jan 2013
Posts: 82
Default OpenBSD current

OpenBSD 5.6-current on my HP 625 :
dmesg :
Quote:
OpenBSD 5.6-current (GENERIC.MP) #634: Mon Dec 1 10:11:11 MST 2014
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
RTC BIOS diagnostic error bf<clock_battery,config_unit,memory_size,fixed_dis k,invalid_time>
real mem = 4006547456 (3820MB)
avail mem = 3896045568 (3715MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xafd1c000 (20 entries)
bios0: vendor Hewlett-Packard version "68DVA Ver. F.03" date 08/13/2010
bios0: Hewlett-Packard HP 625
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC HPET SSDT
acpi0: wakeup devices PCI0(S4) PB4_(S5) NIC_(S5) PB5_(S5) PB9_(S5) PB7_(S5) ECF0(S5) HDEF(S0) USB0(S3) USB1(S3) USB4(S3) USB5(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II P360 Dual-Core Processor, 2294.68 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LON G,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,S SE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II P360 Dual-Core Processor, 2294.26 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LON G,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,S SE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpi0: WARNING EC not initialized
acpiprt0 at acpi0: bus 1 (PEGP)
acpiprt1 at acpi0: bus -1 (PEG2)
acpiprt2 at acpi0: bus 2 (PB4_)
acpiprt3 at acpi0: bus -1 (PB5_)
acpiprt4 at acpi0: bus 6 (PB9_)
acpiprt5 at acpi0: bus 3 (PB7_)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: PFN0, resource for FAN0
acpipwrres2 at acpi0: PFN1, resource for FAN1
acpipwrres3 at acpi0: PFN2, resource for FAN2
acpipwrres4 at acpi0: PFN3, resource for FAN3
acpipwrres5 at acpi0: PFN4, resource for FAN4
acpitz0 at acpi0: critical temperature is 108 degC
acpitz1 at acpi0: critical temperature is 108 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 06255 2011/03/18 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: IGFX
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: EGFX
cpu0: 2294 MHz: speeds: 2300 1700 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Hewlett-Packard", unknown product 0x9602 rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 4 int 18
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0xfffe0000/0x20000
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address 78:e3:b5:49:13:b1
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 7 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci4 at ppb3 bus 6
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG HM320II, 2AC1> SCSI3 0/direct fixed naa.50024e9204968a38
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0300> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
iic0: addr 0x4c 00=2f 01=3a 03=20 04=06 05=4b 07=5a 09=20 0a=06 0b=4b 0d=5a 19=5f 20=55 21=0a 22=70 25=0d 27=12 60=06 70=06 71=05 a4=6f a5=20 ac=29 ad=12 ae=06 af=50 b0=20 b1=20 fd=20 fe=5d ff=01 words 00=2fff 01=3aff 02=80ff 03=20ff 04=06ff 05=4bff 06=00ff 07=5aff
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: IDT/0x7667
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci5 at ppb4 bus 7
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Foxlink HP Webcam [2 MP Fixed]" rev 2.00/1.06 addr 2
video0 at uvideo0
ugen0 at uhub4 port 4 "Broadcom Corp Broadcom 2070 Bluetooth" rev 2.00/4.81 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1d7e0ef88aa1f10b.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1475).
radeondrm0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Reply With Quote
Old 4th December 2014
rocket357's Avatar
rocket357 rocket357 is offline
Real Name: Jonathon
Wannabe OpenBSD porter
 
Join Date: Jun 2010
Location: 127.0.0.1
Posts: 429
Default

I have a few new additions (BeagleBone Black, new Dell laptop, etc...), but the Ultra5 and gang are all still chugging along like they always have. If I'm not mistaken, I've run the same firewall hardware since 2008, which has survived hard drive failures, fan failures, two moves (one cross country), and the like.

The only real change (aside from adding a few OpenBSD machines) is that I have more machines running STABLE than CURRENT now. Go figure.
__________________
Linux/Network-Security Engineer by Profession. OpenBSD user by choice.
Reply With Quote
Old 5th December 2014
hitest's Avatar
hitest hitest is offline
Real Name: George Nielsen
VPN Cryptographer
 
Join Date: Sep 2008
Location: B.C., Canada
Posts: 373
Default

Dell Optiplex GX620. 2.8 GHz with 2 GB RAM and a 500 GB HD. Running OpenBSD 5.6/amd.
__________________
hitest
Reply With Quote
Old 25th December 2014
hitest's Avatar
hitest hitest is offline
Real Name: George Nielsen
VPN Cryptographer
 
Join Date: Sep 2008
Location: B.C., Canada
Posts: 373
Default

Just purchased a used Dell Optiplex 755 3.0 GHZ Core 2 Duo with 4 GB RAM and a 160 GB HD. Running OpenBSD 5.6/amd. I love Dell and OpenBSD.
__________________
hitest
Reply With Quote
Old 6th August 2015
bsdnut82 bsdnut82 is offline
Port Guard
 
Join Date: Jan 2015
Location: Oxfordshire, UK
Posts: 15
Default

My router is now a Dell Optiplex 760, 4Gb ram, 160Gb SATA HDD, Broadcom 1Gbps PCIe NIC (for Lan) salvaged from our "to be disposed of from customer junk pile" running OpenBSD 5.7, it replaced my BT Homehub 5 which is now acting as a Wireless Access point.
Reply With Quote
Old 13th August 2015
richardet richardet is offline
Real Name: Richard Thornton
New User
 
Join Date: Sep 2013
Location: Princeton, NJ
Posts: 6
Default

An older Compaq Presario from early 2006 with an AMD Processor, 64bit with 3GB of memory and a 100GB HD.
Code:
OpenBSD 5.7 (RAMDISK_CD) #806: Sun Mar  8 11:08:49 MDT 2015
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 3404660736 (3246MB)
avail mem = 3312402432 (3158MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (53 entries)
bios0: vendor Phoenix Technologies, LTD version "3.13" date 11/15/2005
bios0: Compaq Presario 061 EL426AA-ABA SR1710NX NA611
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT SRAT MCFG APIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Sempron(tm) Processor 3400+, 1990.14 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 128KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 198MHz

Last edited by ocicat; 13th August 2015 at 09:26 PM. Reason: Please use [code] & [/code] tags when posting console output.
Reply With Quote
Old 13th August 2015
ibara ibara is offline
OpenBSD language porter
 
Join Date: Jan 2014
Posts: 783
Default

(Helpful reminder for everyone to also posts their dmesgs to http://dmesgd.nycbug.org -- every dmesg counts! And not just for OpenBSD, but all of them.)
Reply With Quote
Old 16th August 2015
hitest's Avatar
hitest hitest is offline
Real Name: George Nielsen
VPN Cryptographer
 
Join Date: Sep 2008
Location: B.C., Canada
Posts: 373
Default

Dell Optiplex 990 3.30 GHZ i3 with 4 GB RAM and a 250 GB HD. Running OpenBSD 5.7/amd like a champ.
__________________
hitest
Reply With Quote
Old 22nd October 2015
joekiser joekiser is offline
The World is Yours.
 
Join Date: May 2008
Posts: 51
Default

Broadwell Intel NUC. Home workstation. So tiny sitting next to my Mini-ITX FreeNAS server.

Running -current; UEFI disabled, Legacy Boot enabled. The wifi works, but I'm physically plugged into a gigabit switch.

Code:
OpenBSD 5.8-current (GENERIC.MP) #1537: Tue Oct 20 09:44:09 MDT 2015
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16027291648 (15284MB)
avail mem = 15537426432 (14817MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec7b0 (86 entries)
bios0: vendor Intel Corporation version "RYBDWi35.86A.0130.2014.1203.1639" date 12/03/2014
bios0: \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI SSDT ASF! SSDT SSDT SSDT DMAR
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PS2K(S3) PS2M(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.49 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.16 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.16 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.16 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 3
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus 2 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: FN00, resource for FAN0
acpipwrres4 at acpi0: FN01, resource for FAN1
acpipwrres5 at acpi0: FN02, resource for FAN2
acpipwrres6 at acpi0: FN03, resource for FAN3
acpipwrres7 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 110 degC
acpitz1 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1200, 1100, 1000, 900, 800, 700, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1200
error: [drm:pid0:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-V" rev 0x03: msi, address b8:ae:ed:71:9d:00
azalia0 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia0: codecs: Realtek/0x0283
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 3: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 3 lun 0: <ATA, Crucial_CT500MX2, MU01> SCSI3 0/direct fixed naa.500a07510e6f4572
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x4e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0xa00/8: NCT6776F
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Logitech USB Trackball" rev 1.10/14.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/2.09 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/2.09 addr 3
uhidev2: iclass 3/1, 2 report ids
uhid0 at uhidev2 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
ugen0 at uhub0 port 7 "Intel product 0x0a2a" rev 2.01/0.01 addr 4
uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 468740MB, 512 bytes/sector, 959979612 sectors
softraid0: volume sd1 is roaming, it used to be sd2, updating metadata
root on sd1a (b7304074f7f66bad.a) swap on sd1b dump on sd1b
iwm0: could not read firmware iwm-7265-9 (error 2)
error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns
error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns
error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns
error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns
error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Your NetBSD hardware PhotoJim NetBSD General 22 4th October 2023 01:55 PM
Your FreeBSD Hardware FloridaBSD FreeBSD General 77 18th February 2019 03:33 AM
Hardware recommendation: what hardware to buy for my new FreeBSD desktop? Broodjegehaktmetmayo General Hardware 92 11th February 2009 10:43 PM
upgrading/new hardware from 4.0 knasbas OpenBSD Installation and Upgrading 1 7th January 2009 02:55 AM
What Sun hardware do you have revzalot General Hardware 7 22nd August 2008 01:44 PM


All times are GMT. The time now is 05:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick