|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Laptop won't resume from suspend
Hello again,
Sorry for flooding the forum with all my problems. Today's problem is a HP Compaq nx7400 laptop that refuses to resume from suspend (zzz) It suspends just fine, with the powerled happily blinking away but as soon as I try to wake it up the screen refuses to come on and I'm unable too ssh into it. I tried release 6.4, snapshots and since this morning release 6.5 with the same results. Here is the dmesg. If anybody needs more info I will gladly provide it. Thank you Code:
OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13 14:48:43 MDT 2019 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3598516224 (3431MB) avail mem = 3479891968 (3318MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf3a78 (23 entries) bios0: vendor Hewlett-Packard version "68YGU Ver. F.0E" date 08/27/2008 bios0: Hewlett-Packard HP Compaq nx7400 (EY525ES#ABV) acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT acpi0: wakeup devices C098(S5) C225(S5) C0FA(S3) C0FB(S3) C0FC(S3) C0FD(S3) C114(S5) C22F(S5) C230(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.35 MHz, 06-0f-06 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 166MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.00 MHz, 06-0f-06 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 2 (C098) acpiprt1 at acpi0: bus 8 (C104) acpiprt2 at acpi0: bus 16 (C114) acpiprt3 at acpi0: bus 0 (C002) acpiec0 at acpi0 acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: C1F3, resource for C1EE acpipwrres1 at acpi0: C200, resource for C1F4 acpipwrres2 at acpi0: C21D, resource for C21B acpipwrres3 at acpi0: C226, resource for C123 acpipwrres4 at acpi0: C320, resource for C324 acpipwrres5 at acpi0: C321, resource for C325 acpipwrres6 at acpi0: C322, resource for C326 acpipwrres7 at acpi0: C323, resource for C327 acpitz0 at acpi0: critical temperature is 256 degC acpitz1 at acpi0: critical temperature is 110 degC acpitz2 at acpi0: critical temperature is 105 degC acpitz3 at acpi0: critical temperature is 110 degC acpitz4 at acpi0: critical temperature is 110 degC acpipci0 at acpi0 C002: _OSC failed "PNP0A06" at acpi0 not configured acpicmos0 at acpi0 "SYN010D" at acpi0 not configured "HPQ0006" at acpi0 not configured acpibat0 at acpi0: C1BE model "Primary" serial 11430 2006/07/11 type LIon oem "Hewlett-Packard" acpibat1 at acpi0: C1BD not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C243 acpibtn1 at acpi0: C23C "PNP0C14" at acpi0 not configured "PNP0C0B" at acpi0 not configured "PNP0C0B" at acpi0 not configured "PNP0C0B" at acpi0 not configured "PNP0C0B" at acpi0 not configured acpivideo0 at acpi0: C085 cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1667, 1333, 1000 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0: apic 1 int 16 inteldrm0: 1280x800, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog Devices AD1981HD audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi pci1 at ppb0 bus 8 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi pci2 at ppb1 bus 16 iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: msi, MIMO 2T3R, MoW2, address 00:13:e8:e8:44:51 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci3 at ppb2 bus 2 cbb0 at pci3 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18 bce0 at pci3 dev 14 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 16, address 00:15:60:ca:aa:69 bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-840S, 1.11> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1 ahci0: port 0: 1.5Gb/s scsibus2 at ahci0: 32 targets sd0 at scsibus2 targ 0 lun 0: <ATA, WDC WD5000BEVT-2, 01.0> SCSI3 0/direct fixed naa.50014ee6ab17b175 sd0: 476940MB, 512 bytes/sector, 976773168 sectors usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.2, 0x25a0b1 0x300000 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (630a96cef014fe54.a) swap on sd0b dump on sd0b
__________________
Nothing is more boring than a working computer. |
|
|||
Looks like it will be running linux then
__________________
Nothing is more boring than a working computer. |
|
|||
Or you should acquire the habit of shutting it down instead of suspending ;-)
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump |
|
|||
It's quite an old laptop and that takes some time. It's in the kitchen and needs to play music that on my server. The fun thing is that you open the lid and music starts playing instantly. Booting and shutting down takes the fun out of it.
Maybe it's a good excuse to buy another laptop
__________________
Nothing is more boring than a working computer. |
|
|||
A dmesg alone won't help. You should send the output of dmesg and acpidump to bugs@ if you'd like it fixed.
|
|
|||
I'll try that, thanks
__________________
Nothing is more boring than a working computer. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Laptop with Linux Mint fails to wake-up / resume | J65nko | General software and network | 14 | 21st April 2019 01:01 AM |
for all who love suspend/resume | ocicat | OpenBSD General | 2 | 21st October 2013 04:35 AM |
any consequences to moving a laptop-based installed disk to another different laptop | daemonfowl | OpenBSD General | 7 | 2nd August 2012 04:29 PM |
laptop suspend problems.. | xchris | OpenBSD General | 9 | 29th March 2011 09:14 PM |
OpenBSD request for testing suspend/resume | ocicat | News | 6 | 6th August 2010 04:11 AM |