|
OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD. |
|
Thread Tools | Display Modes |
|
|||
pkg_add times out (?)
Hi. I'm experiencing a strange problem for some time.
After an upgrade and after sysmerge for bringing my laptop to most recent -current, when I try to 'pkg_add -u' after a while I get a strange time out. The process hangs. I couldn't find anything in the mailing lists, so I'm posting here. dmesg: Code:
OpenBSD 5.2 (GENERIC) #275: Tue Jul 24 09:36:18 MDT 2012 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,EST,TM2 real mem = 1063710720 (1014MB) avail mem = 1035472896 (987MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/19/06, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (59 entries) bios0: vendor IBM version "75ET60WW (2.06 )" date 12/19/2006 bios0: IBM 1867WEF apm0 at bios0: Power Management spec V1.2 acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0 at mainbus0: (uniprocessor) cpu0: Enhanced SpeedStep 1497 MHz: speeds: 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) mem address conflict 0x3f700000/0x80000 io address conflict 0x5800/0x8 io address conflict 0x5808/0x4 io address conflict 0x5810/0x8 io address conflict 0x580c/0x4 pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1: no ifp : irq 11 drm0 at inteldrm0 "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11 pci1 at ppb0 bus 2 bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): irq 11, address 00:16:d3:22:13:5a brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11 uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci2 at ppb1 bus 4 cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11 sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11 sdmmc0 at sdhc0 ath0 at pci2 dev 2 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: irq 11 ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6, WOR2W, address 00:16:cf:00:ed:c9 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11, ICH6 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTC426040G9AT00> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11 iic0 at ichiic0 spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (44cbc9ce5d88b0a3.a) swap on wd0b dump on wd0b Code:
> netstat Active Internet connections Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp 0 0 192.168.2.9.27008 147.52.159.12.ftp ESTABLISHED tcp 0 0 192.168.2.9.11207 147.52.159.12.51820 FIN_WAIT_2 tcp 0 0 192.168.2.9.41926 147.52.159.12.54763 FIN_WAIT_2 tcp 0 0 192.168.2.9.27740 147.52.159.12.58781 FIN_WAIT_2 tcp 0 0 192.168.2.9.30638 147.52.159.12.53920 FIN_WAIT_2 tcp 0 0 192.168.2.9.17918 147.52.159.12.51652 FIN_WAIT_2 tcp 0 0 192.168.2.9.22867 147.52.159.12.53921 FIN_WAIT_2 tcp 0 0 192.168.2.9.45112 147.52.159.12.59715 FIN_WAIT_2 tcp 0 0 192.168.2.9.31213 147.52.159.12.56305 FIN_WAIT_2 tcp 0 0 192.168.2.9.19593 147.52.159.12.51013 FIN_WAIT_2 tcp 0 0 192.168.2.9.26907 147.52.159.12.57765 FIN_WAIT_2 tcp 0 0 192.168.2.9.23360 147.52.159.12.54911 FIN_WAIT_2 tcp 0 0 192.168.2.9.24735 147.52.159.12.58079 FIN_WAIT_2 tcp 0 0 192.168.2.9.36629 147.52.159.12.53321 FIN_WAIT_2 Active Internet connections Proto Recv-Q Send-Q Local Address Foreign Address (state) udp 0 0 192.168.2.9.35234 194.177.210.54.ntp Active UNIX domain sockets Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr 0xd6a8844c stream 0 0 0x0 0xd1f3e440 0x0 0x0 /tmp/.X11-unix/X0 0xd6a8811c stream 0 0 0x0 0xd1f3e040 0x0 0x0 /tmp/.X11-unix/X0 0xd6a8800c stream 0 0 0x0 0xd1f16c40 0x0 0x0 /tmp/.X11-unix/X0 0xd6bc7dd8 stream 0 0 0xd6b23348 0x0 0x0 0x0 /tmp/.X11-unix/X0 0xd6bc7aa8 stream 0 0 0x0 0xd1f16cc0 0x0 0x0 0xd6bc7998 stream 0 0 0x0 0xd1f16c80 0x0 0x0 0xd6a88bbc dgram 0 0 0x0 0xd1ebc580 0x0 0xd1ef9040 0xd6a8866c stream 0 0 0xd69fb92c 0x0 0x0 0x0 /tmp/tmux-1000/default 0xd6a8877c stream 0 0 0x0 0xd1f33300 0x0 0x0 0xd6a8888c stream 0 0 0x0 0xd1f33b40 0x0 0x0 0xd6a8822c stream 0 0 0x0 0xd1f505c0 0x0 0x0 0xd6a8833c stream 0 0 0x0 0xd1f3e000 0x0 0x0 0xd6bc7ee8 stream 0 0 0x0 0xd1f33780 0x0 0x0 0xd6bc7888 stream 0 0 0xd6bbb97c 0x0 0x0 0x0 tabs/.sock 0xd6bc7778 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1eff640 0xd6bc7668 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1effd80 0xd6bc7558 stream 0 0 0xd6bbb364 0x0 0x0 0x0 /var/run/apmdev 0xd6bc7448 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1efff80 0xd6bc7228 stream 0 0 0xd6bd58dc 0x0 0x0 0x0 /tmp/aucat/aucat0 0xd6c9e554 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1ebcb40 0xd6c9e004 stream 0 0 0x0 0xd1ebc6c0 0x0 0x0 0xd6d08ee0 stream 0 0 0x0 0xd1ebc740 0x0 0x0 0xd6d08dd0 stream 0 0 0x0 0xd1ebc9c0 0x0 0x0 0xd6d08cc0 stream 0 0 0x0 0xd1ebc900 0x0 0x0 0xd6d08bb0 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1ebcc00 0xd6d08aa0 dgram 0 0 0x0 0xd1ebc580 0x0 0x0 0xd6d08990 stream 0 0 0x0 0xd1ebcd00 0x0 0x0 0xd6d08880 stream 0 0 0x0 0xd1ebcbc0 0x0 0x0 0xd6d08770 stream 0 0 0x0 0xd1ebc440 0x0 0x0 0xd6d08660 stream 0 0 0x0 0xd1ebc400 0x0 0x0 0xd6d08550 dgram 0 0 0xd6cb39e4 0x0 0x0 0x0 /var/empty/dev/log 0xd6d08440 dgram 0 0 0xd6cb3948 0x0 0x0 0x0 /var/www/dev/log 0xd6d08330 dgram 0 0 0xd6cb38ac 0x0 0xd1f3e740 0x0 /dev/log I could not find anything relevant on the mailing lists. :/ This happens on laptop and desktop. Maybe somehow the router terminates the ftp session? [edit]: forgot to mention: - this happens also if I choose another ftp server - pf.conf on laptop empty, on desktop just bruteforce table/rules Last edited by Daffy; 27th July 2012 at 09:46 PM. |
Tags |
pkg_add, time out |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NY Times - History of Computer Viruses | shep | News | 0 | 27th January 2011 09:17 PM |
Last message repeated x times | delboy | FreeBSD General | 6 | 25th June 2009 10:08 AM |
repeat same command n times | gosha | Programming | 8 | 12th March 2009 11:25 PM |
Thanked X times in X posts | johnlvs2run | Feedback and Suggestions | 6 | 18th May 2008 01:21 PM |
Daemonforums very slow, times out a lot | Weaseal | Feedback and Suggestions | 15 | 16th May 2008 12:44 AM |