|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Xorg right click with touchpad
Hi
I am writting this from Lumina, mous pointer is moving, and I can left click. But no right clicking. /usr/X11R6/share/X11/xorg.conf.d/50-synaptics.conf Code:
# Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" # This option is recommend on all Linux systems using evdev, but cannot be # enabled by default. See the following link for details: # http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html # MatchDevicePath "/dev/input/event*" EndSection Section "InputClass" Identifier "touchpad ignore duplicates" MatchIsTouchpad "on" MatchOS "Linux" MatchDevicePath "/dev/input/mouse*" Option "Ignore" "on" EndSection # This option enables the bottom right corner to be a right button on clickpads # and the right and middle top areas to be right / middle buttons on clickpads # with a top button area. # This option is only interpreted by clickpads. Section "InputClass" Identifier "Default clickpad buttons" MatchDriver "synaptics" Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%" EndSection # This option disables software buttons on Apple touchpads. # This option is only interpreted by clickpads. Section "InputClass" Identifier "Disable clickpad buttons on Apple touchpads" MatchProduct "Apple|bcm5974" MatchDriver "synaptics" Option "SoftButtonAreas" "0 0 0 0 0 0 0 0" EndSection /etc/X11/xorg.conf Code:
Section "Device" Identifier "default device" Driver "wsfb" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 Modes "1366x768" EndSubSection EndSection Code:
OpenBSD 6.0-current (GENERIC.MP) #2335: Sun Aug 7 20:50:41 MDT 2016 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> real mem = 2039218176 (1944MB) avail mem = 1972998144 (1881MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x79f02000 (21 entries) bios0: vendor Insyde Corp. version "V1.08" date 09/14/2015 bios0: Acer Aspire one 1-431 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI MSDM UEFI SSDT HPET MCFG SSDT SSDT SSDT SSDT SSDT APIC CSRT FPDT BGRT acpi0: wakeup devices XHC1(S3) BRCM(S0) BRC1(S0) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S0) PXSX(S4) RP04(S4) LID0(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1600.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT cpu0: 1MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 79MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE cpu1 at mainbus0: apid 4 (application processor) cpu1: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1599.99 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT cpu1: 1MB 64b/line 16-way L2 cache cpu1: smt 0, core 2, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus 2 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpicpu0 at acpi0 C2: state 6: substate 8 >= num 3: C1(1000@1 mwait.1), PSS acpicpu1 at acpi0 C2: state 6: substate 8 >= num 3: C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: CLK0, resource for CAMD acpipwrres1 at acpi0: CLK0, resource for CAM1 acpipwrres2 at acpi0: CLK1, resource for CAM2, CAM3 acpipwrres3 at acpi0: ID3C, resource for ISP3 acpipwrres4 at acpi0: USBC, resource for XHC1 acpipwrres5 at acpi0: FN00 acpitz0 at acpi0acpitz1 at acpi0: critical temperature is 127 degC "PNP0501" at acpi0 not configured "MSFT0001" at acpi0 not configured "MSFT0003" at acpi0 not configured acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 serial BE92 type Li-ion "INA2015" at acpi0 not configured sdhc0 at acpi0: SDHA addr 0x91326000/0x1000 irq 45 sdhc0: SDHC 3.0, 200 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma "INTL9C60" at acpi0 not configured "INTL9C60" at acpi0 not configured "BCM2E64" at acpi0 not configured "8086228A" at acpi0 not configured "INT33F7" at acpi0 not configured "INT33BE" at acpi0 not configured "INTCF1C" at acpi0 not configured chvgpio0 at acpi0: GPO0 uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins "ATML1000" at acpi0 not configured "MSFT0002" at acpi0 not configured "NXP7471" at acpi0 not configured "PNP0C14" at acpi0 not configured acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB chvgpio1 at acpi0: GPO1 uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins chvgpio2 at acpi0: GPO2 uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins chvgpio3 at acpi0: GPO3 uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins "ACPI000C" at acpi0 not configured "INT3400" at acpi0 not configured "INT3403" at acpi0 not configured acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21 "Intel HD Graphics" rev 0x21 at pci0 dev 2 function 0 not configured "Intel Braswell Power" rev 0x21 at pci0 dev 11 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel Braswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x21: msi azalia0: codecs: Realtek/0x0235, Intel/0x2883, using Realtek/0x0235 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x21: msi pci2 at ppb1 bus 2 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3160" rev 0x83, msi pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x21 ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x21: apic 1 int 18 iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 efifb0 at mainbus0: 1366x768, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) scsibus1 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <SD/MMC, HBG4e\\005, 0000> SCSI2 0/direct fixed sd0: 29824MB, 512 bytes/sector, 61079552 sectors ugen0 at uhub0 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 2 uvideo0 at uhub0 port 4 configuration 1 interface 0 "SuYin VGA Webcam" rev 2.00/1.00 addr 3 video0 at uvideo0 ugen1 at uhub0 port 5 "Intel product 0x07dc" rev 2.00/0.01 addr 4 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (b9fe348f6a8410be.a) swap on sd0b dump on sd0b iwm0: hw rev 0x160, fw ver 16.242414.0, address 78:0c:b8:63:21:35 |
|
|||
What I have tried now:
Code:
mkdir /etc/X11/xorg.conf.d/ cp /usr/share/X11/xorg.conf.d/50-synaptics.conf /etc/X11/xorg.conf.d/50-synaptics.conf The I tried to remove default config inside 50-synaptics.conf and add instead: Code:
Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" # This option is recommend on all Linux systems using evdev, but cannot be # enabled by default. See the following link for details: # http://who-t.blogspot.com/2010/11/how-t ... rrors.html MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" Option "ClickPad" "true" Option "EmulateMidButtonTime" "0" Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" EndSection Last edited by psypro; 29th October 2016 at 09:04 AM. |
|
|||
Did not find OpenBSD, tried another linux.
https://wiki.archlinux.org/index.php/Touchpad_Synaptics /etc/X11/xorg.conf.d/70-synaptics.conf Code:
Section "InputClass" Identifier "touchpad" Driver "synaptics" MatchIsTouchpad "on" Option "TapButton1" "1" Option "TapButton2" "3" Option "TapButton3" "2" Option "VertEdgeScroll" "on" Option "VertTwoFingerScroll" "on" Option "HorizEdgeScroll" "on" Option "HorizTwoFingerScroll" "on" Option "CircularScrolling" "on" Option "CircScrollTrigger" "2" Option "EmulateTwoFingerMinZ" "40" Option "EmulateTwoFingerMinW" "8" Option "CoastingSpeed" "0" Option "FingerLow" "30" Option "FingerHigh" "50" Option "MaxTapTime" "125" ... EndSectio |
|
|||
From /var/run/dmseg.boot
Code:
pms0: Synaptics clickpad, firmware 8.2/ So should I use 50 or 70 synaptics.conf? And what should be inside? or is the xorg.conf need of editing? |
|
|||
Hi
Thank you for your replay. xinput list Code:
nano # xinput list + Virtual core pointer id=2 [master pointer (3)] | + Virtual core XTEST pointer id=4 [slave pointer (2)] | + Touchpad0 id=6 [slave pointer (2)] | + /dev/wsmouse id=8 [slave pointer (2)] + Virtual core keyboard id=3 [master keyboard (2)] + Virtual core XTEST keyboard id=5 [slave keyboard (3)] + /dev/wskbd Code:
FocusOut event, serial 36, synthetic NO, window 0x1400001, mode NotifyNormal, detail NotifyNonlinear ConfigureNotify event, serial 36, synthetic YES, window 0x1400001, event 0x1400001, window 0x1400001, (194,216), width 178, height 178, border_width 0, above 0x0, override NO ColormapNotify event, serial 36, synthetic NO, window 0x1400001, colormap 0x20, new NO, state ColormapUninstalled ColormapNotify event, serial 36, synthetic NO, window 0x1400001, colormap 0x20, new NO, state ColormapInstalled ColormapNotify event, serial 36, synthetic NO, window 0x1400001, colormap 0x20, new NO, state ColormapUninstalled ColormapNotify event, serial 36, synthetic NO, window 0x1400001, colormap 0x20, new NO, state ColormapInstalled |
|
||||
What does this say:
Code:
xinput list-props "Touchpad0" | grep Capabilities |
|
|||
..... "Touchpad0" | grep Capabilities
Synaptics Capabilities (263): 1, 1, 1, 1, 1, 1, 1 |
|
|||
Copy a part of synclient output
Code:
VertEdgeScroll = 0 HorizEdgeScroll = 0 CornerCoasting = 0 VertTwoFingerScroll = 1 HorizTwoFingerScroll = 0 MinSpeed = 1 MaxSpeed = 1.75 AccelFactor = 0.0374672 TouchpadOff = 0 LockedDrags = 0 LockedDragTimeout = 5000 RTCornerButton = 0 RBCornerButton = 0 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 0 TapButton2 = 0 TapButton3 = 0 ClickFinger1 = 1 ClickFinger2 = 1 ClickFinger3 = 1 CircularScrolling = 0 CircScrollDelta = 0. Last edited by psypro; 29th October 2016 at 12:41 PM. |
|
||||
If you run:
Code:
synclient tapbutton3=1 I really do think that you need to try one of the standard window managers such as fvwm(1) or cwm(1) as this problem may be an issue with the Lumina desktop itself. |
|
|||
I tried with a fresh user, with no .xinitrc file. Pure xorg. Same problem, no right click with toucpad. Everything works with mouse.
Code:
synclient tapbutton3=1 |
|
|||
startx /usr/X11R6/bin/fvwm fails. But pure xorg with a fresh user works, with startx command. So it is not a lumina fault, then the same problem should not be present with a freshly added user, running startx into pure/default xorg.
|
|
||||
Quote:
After you run `synclient tapbutton3=1`, are you then able to simulate a right-click with a single-finger tap? If so, perhaps your touchpad hardware is faulty -- can you test it with a "live" GNU/Linux ISO image? Also, I did ask before: Quote:
|
|
|||
I run 6.0 release.
I have run fwupdate -a and pkg_add -uiv It should be up to date. Touch pad works fine in linux, tried half a year ago. Regarding the command, the command has been registered since the output of the command show 1 instead of 0 for that button. But it has no practial effect, still no right clickinking with touchpad. |
|
||||
Ah, my apologies, your /var/log/dmesg.boot contained references to the OpenBSD-CURRENT kernel so I presumed you were tracking -current.
Things can break in six months, no? Perhaps it would be a good idea to check again. That `synclient` command *does not* enable right-click with the touchpad, it simply allows you to simulate a right-click by tapping the touchpad with a single finger. |
|
|||
/var/run/dmesg.boot
Code:
OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT 2016 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> real mem = 2037055488 (1942MB) avail mem = 1970905088 (1879MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x79eff000 (21 entries) bios0: vendor Insyde Corp. version "V1.08" date 09/14/2015 bios0: Acer Aspire one 1-431 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI TCPA MSDM UEFI SSDT HPET MCFG SSDT SSDT SSDT SSDT SSDT APIC SSDT TPM2 CSRT FPDT BGRT acpi0: wakeup devices XHC1(S3) BRCM(S0) BRC1(S0) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S0) PXSX(S4) RP04(S4) LID0(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1600.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT cpu0: 1MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 79MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE cpu1 at mainbus0: apid 4 (application processor) cpu1: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1600.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT cpu1: 1MB 64b/line 16-way L2 cache cpu1: smt 0, core 2, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus 2 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpicpu0 at acpi0 C2: state 6: substate 8 >= num 3: C1(1000@1 mwait.1), PSS acpicpu1 at acpi0 C2: state 6: substate 8 >= num 3: C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: CLK0, resource for CAMD acpipwrres1 at acpi0: CLK0, resource for CAM1 acpipwrres2 at acpi0: CLK1, resource for CAM2, CAM3 acpipwrres3 at acpi0: ID3C, resource for ISP3 acpipwrres4 at acpi0: USBC, resource for XHC1 acpipwrres5 at acpi0: FN00 acpitz0 at acpi0acpitz1 at acpi0: critical temperature is 127 degC "PNP0501" at acpi0 not configured "MSFT0001" at acpi0 not configured "MSFT0003" at acpi0 not configured acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT0 serial BE92 type Li-ion "INA2015" at acpi0 not configured sdhc0 at acpi0: SDHA addr 0x91326000/0x1000 irq 45 sdhc0: SDHC 3.0, 200 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma "INTL9C60" at acpi0 not configured "INTL9C60" at acpi0 not configured "BCM2E64" at acpi0 not configured "8086228A" at acpi0 not configured "INT33F7" at acpi0 not configured "INT33BE" at acpi0 not configured "INTCF1C" at acpi0 not configured chvgpio0 at acpi0: GPO0 uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins "ATML1000" at acpi0 not configured "MSFT0002" at acpi0 not configured "NXP7471" at acpi0 not configured "PNP0C14" at acpi0 not configured acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB chvgpio1 at acpi0: GPO1 uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins chvgpio2 at acpi0: GPO2 uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins chvgpio3 at acpi0: GPO3 uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins "ACPI000C" at acpi0 not configured "INT3400" at acpi0 not configured "INT3403" at acpi0 not configured "MSFT0101" at acpi0 not configured acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21 "Intel HD Graphics" rev 0x21 at pci0 dev 2 function 0 not configured "Intel Braswell Power" rev 0x21 at pci0 dev 11 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel Braswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x21: msi azalia0: codecs: Realtek/0x0235, Intel/0x2883, using Realtek/0x0235 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x21: msi pci2 at ppb1 bus 2 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3160" rev 0x83, msi pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x21 ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x21: apic 1 int 18 iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 efifb0 at mainbus0: 1366x768, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) scsibus1 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <SD/MMC, HBG4e\\005, 0000> SCSI2 0/direct fixed sd0: 29824MB, 512 bytes/sector, 61079552 sectors uhidev0 at uhub0 port 2 configuration 1 interface 0 "Microsoft Microsoft\M-. 2.4GHz Transceiver v7.0" rev 2.00/6.63 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 2 configuration 1 interface 1 "Microsoft Microsoft\M-. 2.4GHz Transceiver v7.0" rev 2.00/6.63 addr 2 uhidev1: iclass 3/1, 28 report ids uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 uhid1 at uhidev1 reportid 22: input=4, output=0, feature=0 uhid2 at uhidev1 reportid 23: input=0, output=0, feature=1 ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir wsmouse1 at ums0 mux 0 uhid3 at uhidev1 reportid 28: input=3, output=0, feature=0 uhidev2 at uhub0 port 2 configuration 1 interface 2 "Microsoft Microsoft\M-. 2.4GHz Transceiver v7.0" rev 2.00/6.63 addr 2 uhidev2: iclass 3/0, 8 report ids uhid4 at uhidev2 reportid 3: input=1, output=0, feature=0 uhid5 at uhidev2 reportid 4: input=1, output=0, feature=0 uhid6 at uhidev2 reportid 7: input=7, output=0, feature=0 uhid7 at uhidev2 reportid 8: input=1, output=0, feature=0 ugen0 at uhub0 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3 uvideo0 at uhub0 port 4 configuration 1 interface 0 "SuYin VGA Webcam" rev 2.00/1.00 addr 4 video0 at uvideo0 ugen1 at uhub0 port 5 "Intel product 0x07dc" rev 2.00/0.01 addr 5 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (b9fe348f6a8410be.a) swap on sd0b dump on sd0b iwm0: hw rev 0x160, fw ver 16.242414.0, address 78:0c:b8:63:21:35 Code:
Section "Device" Identifier "Card0" Driver "wsfb" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 Modes "1366x768" EndSubSection EndSection Section "InputDevice" Identifier "Touchpad0" Driver "synaptics" Option "Device" "/dev/wsmouse0" Option "AutoServerLayout" "True" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "wsmouse" Option "Device" "/dev/wsmouse" Option "ZAxisMapping" "4 5 6 7" Option "EmulateWheel" "true" Option "EmulateWheelButton" "2" Option "AutoServerLayout" "True" EndSection Code:
Section "InputClass" Identifier "touchpad" Driver "synaptics" MatchIsTouchpad "on" Option "TapButton1" "1" Option "TapButton2" "3" Option "TapButton3" "2" Option "VertEdgeScroll" "on" Option "VertTwoFingerScroll" "on" Option "HorizEdgeScroll" "on" Option "HorizTwoFingerScroll" "on" Option "CircularScrolling" "on" Option "CircScrollTrigger" "2" Option "EmulateTwoFingerMinZ" "40" Option "EmulateTwoFingerMinW" "8" Option "CoastingSpeed" "0" Option "FingerLow" "30" Option "FingerHigh" "50" Option "MaxTapTime" "125" EndSection Code:
[ 1160.721] (--) checkDevMem: using aperture driver /dev/xf86 [ 1160.759] (--) Using wscons driver on /dev/ttyC4 [ 1160.773] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 1160.773] X Protocol Version 11, Revision 0 [ 1160.774] Build Operating System: OpenBSD 6.0 amd64 [ 1160.774] Current Operating System: OpenBSD keep.my.domain 6.0 GENERIC.MP#2319 amd64 [ 1160.774] Build Date: 26 July 2016 01:23:40PM [ 1160.774] [ 1160.774] Current version of pixman: 0.32.8 [ 1160.774] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1160.774] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1160.775] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 29 14:52:10 2016 [ 1160.776] (==) Using config file: "/etc/X11/xorg.conf" [ 1160.776] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 1160.776] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 1160.776] (==) No Layout section. Using the first Screen section. [ 1160.776] (**) |-->Screen "Screen0" (0) [ 1160.776] (**) | |-->Monitor "<default monitor>" [ 1160.777] (**) | |-->Device "Card0" [ 1160.777] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 1160.777] (**) |-->Input Device "Touchpad0" [ 1160.777] (**) |-->Input Device "Mouse0" [ 1160.777] (==) Disabling SIGIO handlers for input devices [ 1160.777] (==) Automatically adding devices [ 1160.777] (==) Automatically enabling devices [ 1160.777] (==) Not automatically adding GPU devices [ 1160.777] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 1160.777] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 1160.777] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 1160.777] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 1160.777] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 1160.777] (WW) Disabling Mouse0 [ 1160.777] (II) Loader magic: 0x104fb34335a0 [ 1160.777] (II) Module ABI versions: [ 1160.777] X.Org ANSI C Emulation: 0.4 [ 1160.777] X.Org Video Driver: 20.0 [ 1160.777] X.Org XInput driver : 22.1 [ 1160.777] X.Org Server Extension : 9.0 [ 1160.778] (--) PCI:*(0:0:2:0) 8086:22b1:1025:106d rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00001000/64 [ 1160.778] (II) LoadModule: "glx" [ 1160.780] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 1160.788] (II) Module glx: vendor="X.Org Foundation" [ 1160.788] compiled for 1.18.3, module version = 1.0.0 [ 1160.788] ABI class: X.Org Server Extension, version 9.0 [ 1160.788] (==) AIGLX enabled [ 1160.789] (II) LoadModule: "wsfb" [ 1160.790] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so [ 1160.790] (II) Module wsfb: vendor="X.Org Foundation" [ 1160.790] compiled for 1.18.3, module version = 0.4.1 [ 1160.790] ABI class: X.Org Video Driver, version 20.0 [ 1160.790] (II) LoadModule: "synaptics" [ 1160.793] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so [ 1160.793] (II) Module synaptics: vendor="X.Org Foundation" [ 1160.793] compiled for 1.18.3, module version = 1.8.3 [ 1160.793] Module class: X.Org XInput Driver [ 1160.793] ABI class: X.Org XInput driver, version 22.1 [ 1160.793] (II) wsfb: driver for wsdisplay framebuffer: wsfb [ 1160.793] (WW) Falling back to old probe method for wsfb [ 1160.794] (II) wsfb(0): using default device [ 1160.794] (==) wsfb(0): Depth 24, (--) framebuffer bpp 32 [ 1160.794] (==) wsfb(0): RGB weight 888 [ 1160.794] (==) wsfb(0): Default visual is TrueColor [ 1160.794] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0) [ 1160.794] (II) wsfb(0): Vidmem: 4128k [ 1160.794] (==) wsfb(0): DPI set to (96, 96) [ 1160.794] (**) wsfb(0): Using "Shadow Framebuffer" [ 1160.794] (II) Loading sub module "shadow" [ 1160.794] (II) LoadModule: "shadow" [ 1160.797] (II) Loading /usr/X11R6/lib/modules/libshadow.so [ 1160.797] (II) Module shadow: vendor="X.Org Foundation" [ 1160.797] compiled for 1.18.3, module version = 1.1.0 [ 1160.797] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1160.797] (II) Loading sub module "fb" [ 1160.797] (II) LoadModule: "fb" [ 1160.800] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 1160.801] (II) Module fb: vendor="X.Org Foundation" [ 1160.801] compiled for 1.18.3, module version = 1.0.0 [ 1160.801] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1160.801] (--) Depth 24 pixmap format is 32 bpp [ 1160.802] (==) wsfb(0): Backing store enabled [ 1160.802] (==) RandR enabled [ 1160.828] (II) AIGLX: Screen 0 is not DRI2 capable [ 1160.828] (EE) AIGLX: reverting to software rendering [ 1160.844] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 1160.846] (II) AIGLX: Loaded and initialized swrast [ 1160.846] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 1161.136] (II) Using input driver 'synaptics' for 'Touchpad0' [ 1161.136] (**) Touchpad0: always reports core events [ 1161.136] (**) Option "Device" "/dev/wsmouse0" [ 1162.053] (--) synaptics: Touchpad0: x-axis range 1472 - 5660 resolution 41 [ 1162.053] (--) synaptics: Touchpad0: y-axis range 1408 - 4718 resolution 60 [ 1162.053] (**) Touchpad0: always reports core events [ 1162.056] (II) XINPUT: Adding extended input device "Touchpad0" (type: TOUCHPAD, id 6) [ 1162.056] (**) synaptics: Touchpad0: (accel) MinSpeed is now constant deceleration 2.5 [ 1162.056] (**) synaptics: Touchpad0: (accel) MaxSpeed is now 1.75 [ 1162.056] (**) synaptics: Touchpad0: (accel) AccelFactor is now 0.037 [ 1162.057] (**) Touchpad0: (accel) keeping acceleration scheme 1 [ 1162.057] (**) Touchpad0: (accel) acceleration profile 1 [ 1162.057] (**) Touchpad0: (accel) acceleration factor: 2.000 [ 1162.057] (**) Touchpad0: (accel) acceleration threshold: 4 [ 1162.514] (II) config/wscons: checking input device /dev/wskbd [ 1162.514] (II) wskbd: using layout no [ 1162.514] (II) LoadModule: "kbd" [ 1162.516] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 1162.517] (II) Module kbd: vendor="X.Org Foundation" [ 1162.517] compiled for 1.18.3, module version = 1.8.1 [ 1162.517] Module class: X.Org XInput Driver [ 1162.517] ABI class: X.Org XInput driver, version 22.1 [ 1162.517] (II) Using input driver 'kbd' for '/dev/wskbd' [ 1162.517] (**) /dev/wskbd: always reports core events [ 1162.517] (**) /dev/wskbd: always reports core events [ 1162.517] (**) Option "Protocol" "standard" [ 1162.517] (**) Option "XkbRules" "base" [ 1162.517] (**) Option "XkbModel" "pc105" [ 1162.517] (**) Option "XkbLayout" "no" [ 1162.517] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 7) [ 1162.611] (II) config/wscons: checking input device /dev/wsmouse [ 1162.611] (II) LoadModule: "ws" [ 1162.613] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 1162.614] (II) Module ws: vendor="X.Org Foundation" [ 1162.614] compiled for 1.18.3, module version = 1.3.0 [ 1162.614] Module class: X.Org XInput Driver [ 1162.614] ABI class: X.Org XInput driver, version 22.1 [ 1162.614] (II) Using input driver 'ws' for '/dev/wsmouse' [ 1162.614] (**) /dev/wsmouse: always reports core events [ 1162.614] (II) ws: /dev/wsmouse: debuglevel 0 [ 1162.614] (**) Option "Device" "/dev/wsmouse" [ 1162.614] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 1162.614] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 1162.614] (**) ws: /dev/wsmouse: associated screen: 0 [ 1162.615] (II) ws: /dev/wsmouse: minimum x position: 0 [ 1162.615] (II) ws: /dev/wsmouse: maximum x position: 1365 [ 1162.615] (II) ws: /dev/wsmouse: minimum y position: 0 [ 1162.615] (II) ws: /dev/wsmouse: maximum y position: 767 [ 1162.615] (==) ws: /dev/wsmouse: Buttons: 7 [ 1162.615] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 1162.615] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8) [ 1162.616] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 1162.616] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 1162.616] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 1162.616] (**) /dev/wsmouse: (accel) acceleration threshold: 4 Last edited by psypro; 29th October 2016 at 01:32 PM. |
|
|||
"That `synclient` command *does not* enable right-click with the touchpad, it simply allows you to simulate a right-click by tapping the touchpad with a single finger. "
Did not produce any simulated right click. |
|
|||
But thank you very much Head_on_a_Stick, for the information regarding 50 vs 70 synaptic.conf, and for asking logical question.And what commands to run, you know alot of unix for so few posts : ) Maby the information given, will be enough for somebody to give a concrete advice how to fix it. I strongly doubt it is hardware failure, multiple install of windows, linux, and openbsd, this problem has only showed up in openBSD, and allways showd up in OpenBSD..
This problem have bothered me since august 2016. Last edited by psypro; 29th October 2016 at 01:26 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HP kills TouchPad | ocicat | News | 10 | 21st March 2012 05:31 PM |
How to disable touchpad | gpatrick | OpenBSD General | 3 | 4th March 2012 03:36 PM |
Nice try, Amazon: 'One-click' payment too obvious to patent | J65nko | News | 1 | 8th July 2011 10:16 AM |
CSP: Thwarting cross-site scripting and click-jacking attacks | J65nko | News | 0 | 5th April 2011 09:57 PM |
carefull confirm on using linux_base-fc8 Click to flag this post | cuongvt | FreeBSD General | 2 | 8th May 2009 01:57 AM |