|
FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Ath0: no carrier
I added
Code:
if_ath_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" I then tried to compile these drivers into the kernel: Code:
device ath # Atheros IEEE 802.11 wireless network driver device ath_hal # Atheros Hardware Access Layer device ath_rate_sample # John Bicket's SampleRate control algorithm. device wlan # 802.11 support (Required) device wlan_wep # WEP crypto support for 802.11 devices device wlan_ccmp # AES-CCMP crypto support for 802.11 devices device wlan_tkip # TKIP and Michael crypto support for 802.11 devices So I then tried to load the necessary modules by hand but I got: Code:
can't load ... : File exists. Code:
ifconfig_ath0="WPA DHCP to /etc/rc.conf I tried: Code:
/etc/rc.d/netif start Starting wpa_supplicant. ELOOP: remaining socket: sock=5 eloop_data=0x28407140 user_data=0x2840e040 handler=0x8069f40 Starting Network: lo0 ath0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:c0:a8:a9:c6:96 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier wpa_supplicant[97512]: Failed to initialise driver interface /etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant Code:
network={ ssid="my network name" key_mgmt=WPA-PSK psk=" my password" } Code:
ifconfig_ath0="WPA DHCP" |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FreeBSD 7.2@amd64 atheros problem ath0: stuck beacon; resetting (bmiss count 4) | asmo | FreeBSD General | 0 | 6th June 2009 11:02 AM |
Freebsd Ath0 mode monitor | mateusrico | FreeBSD General | 3 | 8th April 2009 09:34 AM |
Ath0 + wpa, how configure? | nesca2in1 | FreeBSD General | 10 | 2nd July 2008 04:12 AM |