DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 2 Weeks Ago
sacerdos_daemonis's Avatar
sacerdos_daemonis sacerdos_daemonis is offline
Real Name: Will forever be a secret.
Spam Deminer
 
Join Date: Sep 2014
Posts: 222
Default bad display name in DHCP

This is more for information gathering than help. (Although I probably do need help.)


I reinstalled the system yesterday and it worked fine until rebooted this morning. I took a couple photographs of the screen to get a record of the error messages, but they are to large to post on the board. Loading a GUI was not possible because connection to xserver was refused, no drivers available and no screens found. I reinstalled again using a CD. Everything went smoothly and is working perfectly, except for a message I get when I log out of a GUI:
Code:
xauth: (argv):1: bad display name "randicus.DHCP.0" in "remove" command
There are no problems connecting to the internet, so it seems to only affect GUIs. Of course, the easiest way to test it is to reboot, but I am afraid to do that.

Could this be related to the "hostname" or "full name of user" created during installation? I ask because I have no idea how xorg and xserver are related to DHCP. I have installed OpenBSD several times on two computers, including this one, and have never had so much difficulty before. I do not know if it will help, but this my dmeg:
Code:
OpenBSD 6.4 (GENERIC.MP) #0: Sat Nov 17 22:15:46 CET 2018
    root@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4129878016 (3938MB)
avail mem = 3995439104 (3810MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6ac0 (67 entries)
bios0: vendor LENOVO version "D7CN30WW(V3.03)" date 04/18/2016
bios0: LENOVO 80LM
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT DMAR FPDT
acpi0: wakeup devices PEGP(S3) PEGP(S3) PEG1(S3) PEGP(S3) PEG2(S3) XHC_(S3) HDAS(S4) PXSX(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S3) PXSX(S4) RP06(S3) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2694.52 MHz, 06-4e-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.69 MHz, 06-4e-03
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.69 MHz, 06-4e-03
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.69 MHz, 06-4e-03
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 1 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus -1 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 2 (RP05)
acpiprt8 at acpi0: bus 3 (RP06)
acpiprt9 at acpi0: bus -1 (RP07)
acpiprt10 at acpi0: bus -1 (RP08)
acpiprt11 at acpi0: bus 4 (RP09)
acpiprt12 at acpi0: bus -1 (RP10)
acpiprt13 at acpi0: bus -1 (RP11)
acpiprt14 at acpi0: bus -1 (RP12)
acpiprt15 at acpi0: bus -1 (RP13)
acpiprt16 at acpi0: bus -1 (RP14)
acpiprt17 at acpi0: bus -1 (RP15)
acpiprt18 at acpi0: bus -1 (RP16)
acpiprt19 at acpi0: bus -1 (RP17)
acpiprt20 at acpi0: bus -1 (RP18)
acpiprt21 at acpi0: bus -1 (RP19)
acpiprt22 at acpi0: bus -1 (RP20)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PC05, resource for RP01
acpitz0 at acpi0: critical temperature is 127 degC
acpicmos0 at acpi0
"SYN2B39" at acpi0 not configured
"VPC2004" at acpi0 not configured
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem "LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"PNP0C14" at acpi0 not configured
"MSFT0101" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2694 MHz: speeds: 2301, 2300, 2200, 2100, 2000, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LT012-1DG14, 0002> SCSI3 0/direct fixed naa.5000c5009ae05052
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI 5/cdrom removable
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfffe0000/0x20000
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 8670M" rev 0x83
drm1 at radeondrm0
radeondrm0: msi
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address 1c:39:47:d1:96:78
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99, msi
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
rtsx0 at pci4 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0236, Intel/0x2809, using Realtek/0x0236
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 8.1, 0x1e2b1 0x840300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sunplus USB Optical Mouse" rev 2.00/0.14 addr 2
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z and W dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Bison Corp. Lenovo EasyCamera" rev 2.00/42.08 addr 3
video0 at uvideo0
ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 4
ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (0343cd2d668e3ec1.a) swap on sd0b dump on sd0b
initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x382B).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8670M" rev 0x83 at pci1 dev 0 function 0 not configured
iwm0: hw rev 0x210, fw ver 16.242414.0, address 00:db:df:ed:63:40
syncing disks... done
rebooting...
OpenBSD 6.4 (GENERIC.MP) #0: Sat Nov 17 22:15:46 CET 2018
    root@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4129878016 (3938MB)
avail mem = 3995430912 (3810MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6ac0 (67 entries)
bios0: vendor LENOVO version "D7CN30WW(V3.03)" date 04/18/2016
bios0: LENOVO 80LM
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT DMAR FPDT
acpi0: wakeup devices PEGP(S3) PEGP(S3) PEG1(S3) PEGP(S3) PEG2(S3) XHC_(S3) HDAS(S4) PXSX(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S3) PXSX(S4) RP06(S3) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2694.56 MHz, 06-4e-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.72 MHz, 06-4e-03
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.72 MHz, 06-4e-03
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.72 MHz, 06-4e-03
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 1 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus -1 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 2 (RP05)
acpiprt8 at acpi0: bus 3 (RP06)
acpiprt9 at acpi0: bus -1 (RP07)
acpiprt10 at acpi0: bus -1 (RP08)
acpiprt11 at acpi0: bus 4 (RP09)
acpiprt12 at acpi0: bus -1 (RP10)
acpiprt13 at acpi0: bus -1 (RP11)
acpiprt14 at acpi0: bus -1 (RP12)
acpiprt15 at acpi0: bus -1 (RP13)
acpiprt16 at acpi0: bus -1 (RP14)
acpiprt17 at acpi0: bus -1 (RP15)
acpiprt18 at acpi0: bus -1 (RP16)
acpiprt19 at acpi0: bus -1 (RP17)
acpiprt20 at acpi0: bus -1 (RP18)
acpiprt21 at acpi0: bus -1 (RP19)
acpiprt22 at acpi0: bus -1 (RP20)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PC05, resource for RP01
acpitz0 at acpi0: critical temperature is 127 degC
acpicmos0 at acpi0
"SYN2B39" at acpi0 not configured
"VPC2004" at acpi0 not configured
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem "LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"PNP0C14" at acpi0 not configured
"MSFT0101" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2694 MHz: speeds: 2301, 2300, 2200, 2100, 2000, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LT012-1DG14, 0002> SCSI3 0/direct fixed naa.5000c5009ae05052
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI 5/cdrom removable
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfffe0000/0x20000
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 8670M" rev 0x83
drm1 at radeondrm0
radeondrm0: msi
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address 1c:39:47:d1:96:78
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99, msi
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
rtsx0 at pci4 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0236, Intel/0x2809, using Realtek/0x0236
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 8.1, 0x1e2b1 0x840300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sunplus USB Optical Mouse" rev 2.00/0.14 addr 2
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z and W dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Bison Corp. Lenovo EasyCamera" rev 2.00/42.08 addr 3
video0 at uvideo0
ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 4
ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (0343cd2d668e3ec1.a) swap on sd0b dump on sd0b
initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x382B).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8670M" rev 0x83 at pci1 dev 0 function 0 not configured
iwm0: hw rev 0x210, fw ver 16.242414.0, address 00:db:df:ed:63:40
syncing disks... done
rebooting...
OpenBSD 6.4 (RAMDISK_CD) #348: Thu Oct 11 13:36:16 MDT 2018
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4129878016 (3938MB)
avail mem = 4000923648 (3815MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6ac0 (67 entries)
bios0: vendor LENOVO version "D7CN30WW(V3.03)" date 04/18/2016
bios0: LENOVO 80LM
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT DMAR FPDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2694.58 MHz, 06-4e-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 1 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus -1 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 2 (RP05)
acpiprt8 at acpi0: bus 3 (RP06)
acpiprt9 at acpi0: bus -1 (RP07)
acpiprt10 at acpi0: bus -1 (RP08)
acpiprt11 at acpi0: bus 4 (RP09)
acpiprt12 at acpi0: bus -1 (RP10)
acpiprt13 at acpi0: bus -1 (RP11)
acpiprt14 at acpi0: bus -1 (RP12)
acpiprt15 at acpi0: bus -1 (RP13)
acpiprt16 at acpi0: bus -1 (RP14)
acpiprt17 at acpi0: bus -1 (RP15)
acpiprt18 at acpi0: bus -1 (RP16)
acpiprt19 at acpi0: bus -1 (RP17)
acpiprt20 at acpi0: bus -1 (RP18)
acpiprt21 at acpi0: bus -1 (RP19)
acpiprt22 at acpi0: bus -1 (RP20)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
"PNP0B00" at acpi0 not configured
"SYN2B39" at acpi0 not configured
"VPC2004" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"MSFT0101" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 100 Series Thermal" rev 0x21 at pci0 dev 20 function 2 not configured
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST500LT012-1DG14, 0002> SCSI3 0/direct fixed naa.5000c5009ae05052
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI 5/cdrom removable
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfffe0000/0x20000
"ATI Radeon HD 8670M" rev 0x83 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address 1c:39:47:d1:96:78
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99, msi
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
rtsx0 at pci4 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
"Intel 100 Series LPC" rev 0x21 at pci0 dev 31 function 0 not configured
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
"Intel 100 Series HD Audio" rev 0x21 at pci0 dev 31 function 3 not configured
"Intel 100 Series SMBus" rev 0x21 at pci0 dev 31 function 4 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "vendor 0x1bcf USB Optical Mouse" rev 2.00/0.14 addr 2
uhidev0: iclass 3/1, 1 report id
uhid at uhidev0 reportid 1 not configured
"Bison Corp. Lenovo EasyCamera" rev 2.00/42.08 addr 3 at uhub0 port 5 not configured
"vendor 0x138a product 0x0011" rev 1.10/0.78 addr 4 at uhub0 port 6 not configured
"vendor 0x8087 product 0x0a2a" rev 2.00/0.01 addr 5 at uhub0 port 7 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
syncing disks...
OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4129878016 (3938MB)
avail mem = 3995443200 (3810MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6ac0 (67 entries)
bios0: vendor LENOVO version "D7CN30WW(V3.03)" date 04/18/2016
bios0: LENOVO 80LM
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT DMAR FPDT
acpi0: wakeup devices PEGP(S3) PEGP(S3) PEG1(S3) PEGP(S3) PEG2(S3) XHC_(S3) HDAS(S4) PXSX(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S3) PXSX(S4) RP06(S3) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2694.56 MHz, 06-4e-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.75 MHz, 06-4e-03
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.75 MHz, 06-4e-03
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2693.75 MHz, 06-4e-03
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 1 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus -1 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 2 (RP05)
acpiprt8 at acpi0: bus 3 (RP06)
acpiprt9 at acpi0: bus -1 (RP07)
acpiprt10 at acpi0: bus -1 (RP08)
acpiprt11 at acpi0: bus 4 (RP09)
acpiprt12 at acpi0: bus -1 (RP10)
acpiprt13 at acpi0: bus -1 (RP11)
acpiprt14 at acpi0: bus -1 (RP12)
acpiprt15 at acpi0: bus -1 (RP13)
acpiprt16 at acpi0: bus -1 (RP14)
acpiprt17 at acpi0: bus -1 (RP15)
acpiprt18 at acpi0: bus -1 (RP16)
acpiprt19 at acpi0: bus -1 (RP17)
acpiprt20 at acpi0: bus -1 (RP18)
acpiprt21 at acpi0: bus -1 (RP19)
acpiprt22 at acpi0: bus -1 (RP20)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PC05, resource for RP01
acpitz0 at acpi0: critical temperature is 127 degC
acpicmos0 at acpi0
"SYN2B39" at acpi0 not configured
"VPC2004" at acpi0 not configured
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem "LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"PNP0C14" at acpi0 not configured
"MSFT0101" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2694 MHz: speeds: 2301, 2300, 2200, 2100, 2000, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LT012-1DG14, 0002> SCSI3 0/direct fixed naa.5000c5009ae05052
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI 5/cdrom removable
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfffe0000/0x20000
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 8670M" rev 0x83
drm1 at radeondrm0
radeondrm0: msi
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address 1c:39:47:d1:96:78
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99, msi
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
rtsx0 at pci4 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0236, Intel/0x2809, using Realtek/0x0236
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 8.1, 0x1e2b1 0x840300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sunplus USB Optical Mouse" rev 2.00/0.14 addr 2
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z and W dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Bison Corp. Lenovo EasyCamera" rev 2.00/42.08 addr 3
video0 at uvideo0
ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 4
ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (b43654598e81b923.a) swap on sd0b dump on sd0b
initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x382B).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8670M" rev 0x83 at pci1 dev 0 function 0 not configured
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
umass0 at uhub0 port 14 configuration 1 interface 0 "Western Digital Elements 10A2" rev 3.00/10.33 addr 6
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <WD, Elements 10A2, 1033> SCSI4 0/direct fixed serial.105810a2324B31353332
sd1: 476908MB, 512 bytes/sector, 976707584 sectors
I see two errors that may not be important, since I believe I have seen them before.
Code:
error: [drm:pid0:i915_firmware_load_error_print]error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)


initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x382B).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
Hopefully I shall still have a GUI after rebooting and can ignore that DHCP error message, but even so, I would like to know if I am making a mistake during installation. For hostname I enter my user name. For full name of user, in the past I used a three-name full name. This time I used the same single name for hostname and full name. Do such things have effect on the system? I am inclined to think not since the internet connection is working fine, but I am too far out of my element to be even remotely sure of anything.



Edit
i3status says there is no internet connection. So that may be related to my question, but probably not.
__________________
OpenBSD 6.4

Last edited by sacerdos_daemonis; 2 Weeks Ago at 04:54 AM.
Reply With Quote
  #2   (View Single Post)  
Old 2 Weeks Ago
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 6,377
Default

First, resolve any local DNS issues. Check your /etc/myname contents. This should be a resolvable, fully qualified domain name. If your domain is personal and not resolvable via your DNS nameservers, the name must be resolvable via provisioning your hosts(5) file and your resolv.conf(5) must include a lookup that includes "file". I have an /etc/resolv.conf.tail that contains "lookup file bind" so that my resolver will always look at my /etc/hosts file before reaching out to a nameserver.

Second, you appear to be missing graphics firmware. Once you establish an internet connection, run # fw_update.
Reply With Quote
  #3   (View Single Post)  
Old 2 Weeks Ago
sacerdos_daemonis's Avatar
sacerdos_daemonis sacerdos_daemonis is offline
Real Name: Will forever be a secret.
Spam Deminer
 
Join Date: Sep 2014
Posts: 222
Default

/etc/myname
Code:
randicus.DHCP
Perhaps .org should be before .DHCP?


resolve.conf looks fine. It has two nameservers and "lookup file bind."
__________________
OpenBSD 6.4
Reply With Quote
  #4   (View Single Post)  
Old 2 Weeks Ago
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 6,377
Default

Is randicus.DHCP in your /etc/hosts file? You should confirm it is resolving correctly to 127.0.0.1 with $ ping -c 1 randicus.DHCP
Reply With Quote
  #5   (View Single Post)  
Old 2 Weeks Ago
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 828
Default

I suspect the ".DHCP" string got into /etc/myname by mistake, perhaps by user error at install time? The file should contain the fully qualified domain name of the system.
Reply With Quote
  #6   (View Single Post)  
Old 2 Weeks Ago
sacerdos_daemonis's Avatar
sacerdos_daemonis sacerdos_daemonis is offline
Real Name: Will forever be a secret.
Spam Deminer
 
Join Date: Sep 2014
Posts: 222
Default

DHCP is not in /etc/hosts, but is in /etc/myname. Cannot ping it.

Yes could and probably was an error during installation. It has been at least two years since the last time I installed a system and probably messed up. I distinctly remember naming my systems with name.org in the past, but this time I forgot about that and left out the .org. DHCP must have been put there by the installer. I am going to edit the file by replacing DHCP with ,org and see what happens.
__________________
OpenBSD 6.4
Reply With Quote
  #7   (View Single Post)  
Old 2 Weeks Ago
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 6,377
Default

And here I am, thinking that you intended your local domain to be ".DHCP" for a personal reason.
Reply With Quote
  #8   (View Single Post)  
Old 2 Weeks Ago
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 828
Default

Quote:
Originally Posted by sacerdos_daemonis View Post
Yes could and probably was an error during installation. It has been at least two years since the last time I installed a system and probably messed up. I distinctly remember naming my systems with name.org in the past, but this time I forgot about that and left out the .org.
It's easy to make these kinds of slip-ups, or get confused about which installer question has what defaults, especially after a while of not doing it.

Quote:
I am going to edit the file by replacing DHCP with ,org and see what happens.
Using an existing top-level domain like .org is probably not a good idea. On the one hand, as long as you remember to put your own hosts into the /etc/hosts file, and use it first for lookups, you will be able to reach them. But, if there is a real Internet domain under .org with the same name as one of your hosts, you won't be able to look it up properly, because your resolver will return the IP address of the host on your LAN instead of the real one. While this may be an unlikely naming overlap, it really should not be done that way. It's better to chose some bogus non-existent top level domain for your network, so that there can be no conflict. I use .lan, but there may be better choices. I'm not sure what is the latest best practice about such reserved names for private usage.

Quote:
Originally Posted by jggimi
And here I am, thinking that you intended your local domain to be ".DHCP" for a personal reason.
Not an unreasonable assumption given we are often an eclectic bunch.
Reply With Quote
  #9   (View Single Post)  
Old 2 Weeks Ago
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 6,377
Default

".local" is commonly used, and it is reserved for local use by ICANN/IANA. But ".local" will interfere with Apple's multicasting DNS, should you have the avahi_daemon running (from the avahi package).

In my lab virtual machines, I use ".lab" though RFC 2606 tells me I should use ".test" instead.

Outside the lab, all my systems use my second level domain, whether they are private or public facing. I pay for it, so I might as well use it. If I didn't have it, I'd just use .local.
Reply With Quote
Old 2 Weeks Ago
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 828
Default

Thanks for the reference to RFC 2606, that's a nice short read!

There was also some forum discussion about this question in this thread. In that thread I linked an RFC under development. It seems that document has become RFC 6762 now, but the material in Appendix G has the status of an observation of things that worked at the time but is not really recommended as they might stop working in the future I suppose.
Reply With Quote
Old 1 Week Ago
sacerdos_daemonis's Avatar
sacerdos_daemonis sacerdos_daemonis is offline
Real Name: Will forever be a secret.
Spam Deminer
 
Join Date: Sep 2014
Posts: 222
Default

Thanks for the ideas. I also solved the problem of i3status not seeing the internet connection. For some reason the default i3status.conf now has ethernet em0. I changed the two entries to re0 and problem solved.
__________________
OpenBSD 6.4
Reply With Quote
Old 1 Week Ago
sacerdos_daemonis's Avatar
sacerdos_daemonis sacerdos_daemonis is offline
Real Name: Will forever be a secret.
Spam Deminer
 
Join Date: Sep 2014
Posts: 222
Default

The internet was shutdown for three days while some "work" was done. So yesterday was a good day. Upon booting this morning the problem returned. I can use the TTY, but cannot load a GUI. I wrote down parts of the error message. Hopefully I chose useful parts and there are no spelling errors.

Code:
ModulePath set to "/usr/X11R6/lib/modules"
    If no devices become available, reconfigure wscons or disable AutoAddDevices.

checkDevMem: failed to open /dev/xf86 and /dev/mem
    (Permission denied)
    check that you have set 'machdep.allowaperture=1'
    in /etc/sysctl.conf and reboot machine
    refer to xf86 for details

linear framebuffer access unavailable
LoadModule: "glx"
Loading /usr/X11R6/lib/modules/extensions/libglx.so
Assigned the driver to the xf86Configlayout
No drivers available.

No screens found
Before logging in this message is displayed:
Code:
xauth: (stdin):1: bad display name "randicus.org:0" in "add" command
startx results in
Code:
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: (argv):1: bad display name "randicus.org:0" in "remove" command
/etc/resolv.conf
search DHCP HOST
nameserver ... (listed address is correct)
lookup file bind

/etc/hostname.re0
DHCP

/etc/hosts
... localhost
::1 localhost

I believe those three files are correct.

Firmware update and syspatch are both up-to-date. The only other thing I can think of off the top of my head is using ~/.xinit (it is the only way I have figured out how to make startx load i3), but I doubt very much that is the problem.

At this point I do not know if I managed to completely screw up my connection configuration or if 6.4 does not like my hardware. I am strongly tempted to reinstall 6.3 and wait for 6.5 before upgrading.
__________________
OpenBSD 6.4
Reply With Quote
Old 1 Week Ago
Head_on_a_Stick's Avatar
Head_on_a_Stick Head_on_a_Stick is offline
Real Name: Matthew
Bloaty McBloatFace
 
Join Date: Dec 2015
Location: London
Posts: 102
Default

Quote:
Originally Posted by sacerdos_daemonis View Post
startx results in
Code:
xinit: unable to connect to X server: Connection refused
Try using xenodm instead.

https://www.openbsd.org/faq/faq11.html#StartingX

See also http://daemonforums.org/showthread.php?t=10812
__________________
Linux is for people who hate Windows. BSD is for people who love UNIX.
Reply With Quote
Old 1 Week Ago
sacerdos_daemonis's Avatar
sacerdos_daemonis sacerdos_daemonis is offline
Real Name: Will forever be a secret.
Spam Deminer
 
Join Date: Sep 2014
Posts: 222
Default

Thanks for pointing my attention to the other thread. I followed jggimi's instructions:
$ ln .xinitrc .xsession
# rcctl -f start xenodm

and X is working again. Hopefully all is still fine after I make the other modifications.
__________________
OpenBSD 6.4
Reply With Quote
Old 1 Week Ago
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 6,377
Default

This is interesting, only because of an extra keyword:
Quote:
Originally Posted by sacerdos_daemonis View Post
[/CODE]/etc/resolv.conf
search DHCP HOST
nameserver ... (listed address is correct)
lookup file bind
[/code]
The search option of resolv.conf(5) is used as a "short name" resolver aid. Yours includes both your "DHCP" local domain, which as discussed above was deployed by accident and should be corrected. But this search list also includes a "HOST" local domain, which hasn't surfaced before in this thread, to the best of my recollection.

I wonder where "HOST" comes from? lt's academic, as your hosts(5) file only resolves localhost, so the resolver will not be able to resolve <name>.DHCP or <name>.HOST lookups.

A resolv.conf() file created through DHCP services should have a comment as its top line, such as "# Generated by re0 dhclient"
Reply With Quote
Old 1 Week Ago
sacerdos_daemonis's Avatar
sacerdos_daemonis sacerdos_daemonis is offline
Real Name: Will forever be a secret.
Spam Deminer
 
Join Date: Sep 2014
Posts: 222
Default

Code:
# Generated by re0 dhclient
search DHCP HOST
nameserver 202.- -.- - -.- -
nameserver 202.- -.- - -.- -
lookup file bind
I omitted the numbers because I assume it is bad idea to broadcast my address on the internet. I have no idea how HOST got in there, but I take it I should remove it.
__________________
OpenBSD 6.4
Reply With Quote
Old 1 Week Ago
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 6,377
Default

The statements in resolv.conf() come from a negotiation between dhclient(8) on OpenBSD and the DHCP server on your local network. If you have no dhclient.conf(5) file in /etc, then I will guess that the "HOST" search field comes from your DHCP server, since the first domain, "DHCP," comes from your hostname set by your myname(5) file.

Last edited by jggimi; 1 Week Ago at 02:34 PM. Reason: clarity
Reply With Quote
Old 1 Week Ago
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 6,377
Default

For clarity, here's an example from my laptop.

Short name: "x220"
Domain name: "jggimi.net" (only because I have the domain, otherwise this would have been "local")
Nameserver: 10.0.1.1 (on the local network, provided by my DHCP servers)

----

/etc/myname:
Code:
x220.jggimi.net
/etc/resolv.conf:
Code:
# Generated by rtwn0 dhclient
search jggimi.net
nameserver 10.0.1.1
lookup file bind
My /etc/resolv.conf.tail:
Code:
lookup file bind
My /etc/hosts file contains nicknames for lab machines that aren't defined in my local nameserver:
Code:
127.0.0.1       localhost
::1             localhost

100.64.1.3      i386
100.64.2.3      amd64
100.64.3.3      test
10.9.0.4        armv7
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Display gamma. bsd-apprentice OpenBSD General 2 20th June 2018 10:49 AM
Disable DHCP: is it at all possible? WeoNat OpenBSD General 14 29th March 2016 01:38 AM
How to power off Display? batence NetBSD General 12 15th February 2015 09:29 PM
I can DHCP but after that...nada on the net raindog308 OpenBSD Installation and Upgrading 9 4th October 2011 06:44 PM
isc dhcp server queshaw OpenBSD Packages and Ports 1 8th February 2011 11:09 AM


All times are GMT. The time now is 07:55 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick