|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Cannot mount (NTFS)
Hi,
I have a Windows HD and have been trying to mount it in OpenBSD. Code:
# mount /dev/wd0i /mnt/winhdd mount_ntfs: /dev/wd0i on /mnt/winhdd: Operation not supported # mount -r /dev/wd0i /mnt/winhdd mount_ntfs: /dev/wd0i on /mnt/winhdd: Operation not supported Code:
/dev/wd1a / ffs rw 1 1 /dev/wd1g /home ffs rw,nodev,nosuid 1 2 /dev/wd1d /tmp ffs rw,nodev,nosuid 1 2 /dev/wd1f /usr ffs rw,nodev 1 2 /dev/wd1e /var ffs rw,nodev,nosuid 1 2 Code:
/dev/wd0i /mnt/winhdd ntfs r 1 2 Here's some information that may or may not be helpful (I can't tell what's what, to be honest). disklabel: Code:
# /dev/rwd0c: type: ESDI disk: ESDI/IDE disk label: IBM-DHEA-36480 flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 790 total sectors: 12692736 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] c: 12692736 0 unused 0 0 i: 12675222 63 NTFS Code:
Disk: wd0 geometry: 790/255/63 [12692736 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info: #: id C H S - C H S [ start: size ] ------------------------------------------------------------------------------- *0: 07 0 1 1 - 788 254 63 [ 63: 12675222 ] HPFS/QNX/AUX 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused Code:
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 501 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX real mem = 393768960 (375MB) avail mem = 372424704 (355MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/14/99, BIOS32 rev. 0 @ 0xfb470, SMBIOS rev. 2.1 @ 0xf0800 (12 entries) bios0: vendor Award Software version "4.51 PG" date 09/14/99 bios0: Compaq Compaq PC apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb90c pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/144 (7 entries) pcibios0: PCI Exclusive IRQs: 3 5 10 11 12 pcibios0: PCI Interrupt Router at 000:01:0 ("SiS 85C503 System" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0x8000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "SiS 530 PCI" rev 0x03 agp0 at pchb0: aperture at 0xe0000000, size 0x4000000 pciide0 at pci0 dev 0 function 1 "SiS 5513 EIDE" rev 0xd0: 530: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DHEA-36480> wd0: 16-sector PIO, LBA, 6197MB, 12692736 sectors wd1 at pciide0 channel 0 drive 1: <QUANTUM FIREBALL CX10.0A> wd1: 16-sector PIO, LBA, 9541MB, 19541088 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-W512EB, 2.0K> SCSI0 5/cdrom removable atapiscsi1 at pciide0 channel 1 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <LG, CD-RW CED-8042B, 1.07> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 cd1(pciide0:1:1): using PIO mode 4, DMA mode 2 pcib0 at pci0 dev 1 function 0 "SiS 85C503 System" rev 0xb1 "SiS 5595 System" rev 0x00 at pci0 dev 1 function 1 not configured ohci0 at pci0 dev 1 function 2 "SiS 5597/5598 USB" rev 0x11: irq 3, version 1.0, legacy support ppb0 at pci0 dev 2 function 0 "SiS 86C201 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "SiS 530 VGA" rev 0xa3 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ohci1 at pci0 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11, version 1.0, legacy support ohci2 at pci0 dev 11 function 1 "Acer Labs M5237 USB" rev 0x03: irq 10, version 1.0, legacy support ohci3 at pci0 dev 11 function 2 "Acer Labs M5237 USB" rev 0x03: irq 12, version 1.0, legacy support ehci0 at pci0 dev 11 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 dc0 at pci0 dev 13 function 0 "Davicom DM9102" rev 0x40: irq 11, address 00:08:a1:8c:91:04 amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 1 eso0 at pci0 dev 15 function 0 "ESS SOLO-1 AudioDrive" rev 0x01: ES1946, irq 10 audio0 at eso0 opl0 at eso0: model OPL3 midi0 at opl0: <ESO Yamaha OPL3> mpu at eso0 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi1 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: LM78 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci3: USB revision 1.0 uhub4 at usb4 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 eso0: mapping Audio 1 DMA using I/O space at 0x410 biomask ff6d netmask ff6d ttymask ffef mtrr: K6-family MTRR support (2 registers) uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 softraid0 at root root on wd1a swap on wd1b dump on wd1b umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler U3" rev 2.00/2.00 addr 3 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler U3, 6.16> SCSI0 0/direct removable sd0: 978MB, 124 cyl, 255 head, 63 sec, 512 bytes/sec, 2004991 sec total |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NTFS on DragonFly BSD | Malakim | Other BSD and UNIX/UNIX-like | 4 | 17th October 2008 03:43 PM |
Mounting ntfs drive as rw using fusefs-ntfs | caesius | FreeBSD General | 3 | 12th October 2008 11:08 AM |
fdisk can't see (Vista) ntfs partitions | caesius | FreeBSD General | 7 | 23rd September 2008 01:01 AM |
fusefs-ntfs problem... | daemonFromHeaven | FreeBSD Ports and Packages | 4 | 12th September 2008 10:15 AM |
mount problems with ntfs drive | shinjii | FreeBSD General | 3 | 25th June 2008 12:33 AM |