|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
pppoe help
Hi I have openbsd 4.4 and I am trying to set it up as a gateway firewall using pppoe.
I have two nics rl0 internal and fxp0 external and plugged into the router which is a Netgear DG632 set as a modem which from what I read is the required setting. To get things going I followed this guide here http://www.openbsd-wiki.org/index.ph...r_and_Firewall My ifconfig gives me Code:
# ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33204 groups: lo inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:90:27:bf:c4:5f media: Ethernet autoselect (100baseTX full-duplex) status: active inet6 fe80::290:27ff:febf:c45f%fxp0 prefixlen 64 scopeid 0x1 rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:01:29:09:1c:dd media: Ethernet autoselect (100baseTX full-duplex) status: active inet 192.168.2.3 netmask 0xffffff00 broadcast 192.168.2.255 inet6 fe80::201:29ff:fe09:1cdd%rl0 prefixlen 64 scopeid 0x2 enc0: flags=0<> mtu 1536 pppoe0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1492 dev: fxp0 state: PADI sent sid: 0x0 PADI retries: 5 PADR retries: 0 sppp: phase establish authproto chap authname "user@plusdsl.net" groups: pppoe egress inet6 fe80::290:27ff:febf:c45f%pppoe0 -> prefixlen 64 scopeid 0x5 inet 0.0.0.0 --> 0.0.0.1 netmask 0xffffffff Code:
# more /etc/hostname.pppoe0 inet 0.0.0.0 255.255.255.255 NONE pppoedev fxp0 \ authproto chap authname user@plusdsl.net authkey passwd up dest 0.0.0.1 !/sbin/route add default 0.0.0.1 Any info welcome The modem seems to have died so its not an issue at the moment Last edited by terryd; 14th February 2009 at 10:05 AM. |
Thread Tools | |
Display Modes | |
|
|