|
OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
|
Thread Tools | Display Modes |
|
|||
OpenBSD 4.6 i386 boot hangs with old Gateway system - resolved
This problem is resolved I want to document it.
When booting 4.4, 4.5 and a recent 4.6, lots of boot configuration messages appear and then the process just stops, hangs, freezes... To fix the problem while booting I do this: >boot -c ... ukc>disable apm ukc>quit And to "permanently" fix the problem I alter the /bsd boot file like this: mv /bsd /bsd.old config -e -o /bsd /bsd.old ukc>disable apm ukc>quit Here is the dmesg from a successful boot: Code:
OpenBSD 4.6-current (GENERIC) #105: Mon Aug 10 18:02:36 MDT 2009 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 512KB L2 cache) 699 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 267874304 (255MB) avail mem = 250736640 (239MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/05/99, BIOS32 rev. 0 @ 0xfdab0, SMBIOS rev. 2.3 @ 0xf0920 (38 entries) bios0: vendor American Megatrends Inc. version "0AASNP06" date 07/23/1999 bios0: Gateway " apm at bios0 function 0x15 not configured acpi0 at bios0: rev 0 acpi0: tables DSDT FACP acpi0: wakeup devices PS2M(S1) PS2K(S1) PCI0(S1) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGPB) acpicpu0 at acpi0 bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "AMD 751 System" rev 0x25 amdagp0 at pchb0 agp0 at amdagp0: aperture at 0xf8000000, size 0x4000000 ppb0 at pci0 dev 1 function 0 "AMD 751 PCI-PCI" rev 0x01 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 "NVIDIA Vanta" rev 0x15 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "AMD 756 ISA" rev 0x01 pciide0 at pci0 dev 7 function 1 "AMD 756 IDE" rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <FUJITSU MPD3043AT> wd0: 16-sector PIO, LBA, 4125MB, 8448300 sectors wd1 at pciide0 channel 0 drive 1: <FUJITSU MPF3102AT> wd1: 16-sector PIO, LBA, 9773MB, 20015856 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8483B, 1.02> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 amdpm0 at pci0 dev 7 function 3 "AMD 756 Power" rev 0x03 ohci0 at pci0 dev 7 function 4 "AMD 756 USB Host" rev 0x06: irq 10, version 1.0, legacy support ral0 at pci0 dev 15 function 0 "Ralink RT2561S" rev 0x00: irq 11, address 00:14:a5:0f:72:34 ral0: MAC/BBP RT2661B, RF RT2527 "Conexant 56k Winmodem" rev 0x08 at pci0 dev 17 function 0 not configured epic0 at pci0 dev 18 function 0 "SMC 83C170 (EPIC/100)" rev 0x08, SMC9432TX : irq 9, address 00:e0:29:31:9a:5c qsphy0 at epic0 phy 3: QS6612 10/100 PHY, rev. 1 xl0 at pci0 dev 19 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 5, address 00:10:5a:11:16:7e exphy0 at xl0 phy 24: 3Com internal media interface eap0 at pci0 dev 20 function 0 "Ensoniq AudioPCI97" rev 0x08: irq 9 ac97: codec id 0x43525913 (Cirrus Logic CS4297A rev 3) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D audio0 at eap0 midi0 at eap0: <AudioPCI MIDI UART> isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi1 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "AMD OHCI root hub" rev 1.00/1.00 addr 1 biomask f5cd netmask ffed ttymask ffff mtrr: Pentium Pro MTRR support uhidev0 at uhub0 port 1 configuration 1 interface 0 "Kensington USB/PS2 Wheel Mouse" rev 1.10/1.01 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 5 buttons, Z dir wsmouse0 at ums0 mux 0 softraid0 at root root on wd0a swap on wd0b dump on wd0b Last edited by comet--berkeley; 15th August 2009 at 04:41 PM. Reason: formatting |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
openBSD IPSEC gateway w/WINDOWS XP roadwarrior | s2scott | OpenBSD Security | 7 | 13th January 2009 11:01 AM |
openbsd hangs momentarily at boot | bogd | OpenBSD General | 11 | 9th January 2009 02:53 PM |
I386 ELF32 binary on AMD64 system can't find shared libraries | Gemini | FreeBSD General | 0 | 9th December 2008 06:49 AM |
FreeBSD hangs on boot | Bubba_HoTep | FreeBSD General | 3 | 29th November 2008 10:25 PM |
Allow i386 and amd64 to boot from extended DOS partitions | lvlamb | OpenBSD General | 4 | 16th July 2008 03:24 PM |