![]() |
|
OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD. |
![]() |
|
Thread Tools | Display Modes |
|
|||
![]()
Hello,
I am still a beginner and need some advice regarding the window manager PekWM. On a fresh OpenBSD 5.4 (release) installation I am trying make PekWM work. While I don't have any problems with Fluxbox, PekWM just gives me a grey screen with a cursor but no context menu. I added "exec pekwm" to my .xinitrc and then I enter startx. What might be the problem? On another note I wonder if it is correct to add "/usr/local/bin/slim" to /etc/rc.conf.local in order to start that display manager? Thank you in advance! |
|
|||
![]()
Usually if a window manager fails you will be returned to the console prompt. I am not a PekWM user but I wonder if it actually started and you have a bare bones configuration.
If you right click does a menu pop up? Have you set up any user configuration files? I found some online documentation here. Slim has an rc.d daemon so it should start from the pkg_scripts entry in /etc/rc.conf.local |
|
|||
![]()
Thank you both. I got slim fixed now.
I got some experience with pekwm on Linux and FreeBSD. Never had any trouble there. PekWM creates those configuration files automatically when it is first started. To be on the safe side I copied the example files from /usr/local/share/examples/pekwm into ~/.pekwm. But to no avail. I only see a grey (not a solid grey - it is kind of dotted and quite unpleasant to the eye) with the cursor. And there is no menu available when I right click. I am forced to press ctrl+alt+backspace to get back to the console. Once I am back I got error messages about failures in opening files in /etc/pekwm/*** (will post them tomorrow if necessary) as well as a "xauth: bad display name" error. And yes in my .xinitrc file I commented out fluxbox when I want to start pekwm. |
|
|||
![]() Quote:
I think carpetsmoker has used PekWM so hopefully he will weigh in. Also, if you get the Slim Display manager working and start an .xsession you should get some error messages in .xsession-errors. Lastly, in OpenBSD, .xinitrc/.xsession need to be executable, ie $ chmod +x .xsession
Last edited by shep; 27th November 2013 at 11:35 PM. |
|
|||
![]() Quote:
Since Fluxbox runs just fine (with and without Slim) I believe that there is something wrong with pekwm itself... |
|
||||
![]()
We haven't seen your error messages, we only have symptoms you have described to us.
The "dotted and unpleasant to the eye" screen you describe could indicate a problem with pekwm or a problem with X Windows. Along with sharing those error messages from .xsession-errors, you might look for error messages in /var/log/Xorg.0.log as well, as that is where X stores information, warning, and error messages. |
|
|||
![]() Quote:
Quote:
Last edited by nasser; 29th November 2013 at 11:53 AM. Reason: Changed the URL for more convenience. |
|
|||
![]() |
|
|||
![]() Quote:
Code:
# Set Background color xsetroot -solid "#172636" Last edited by shep; 29th November 2013 at 03:38 AM. |
|
|||
![]()
Here is my .xsession-errors:
Code:
Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.colorsPerChannel Setting default value Failed to read: session.doubleClickInterval Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.styleOverlay Setting default value Failed to read: session.slitlistFile Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.cacheLife Setting default value Failed to read: session.cacheMax Setting default value Failed to read: session.autoRaiseDelay Setting default value Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.colorsPerChannel Setting default value Failed to read: session.doubleClickInterval Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.styleOverlay Setting default value Failed to read: session.slitlistFile Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.cacheLife Setting default value Failed to read: session.cacheMax Setting default value Failed to read: session.autoRaiseDelay Setting default value Failed to read: session.screen0.opaqueMove Setting default value Failed to read: session.screen0.fullMaximization Setting default value Failed to read: session.screen0.maxIgnoreIncrement Setting default value Failed to read: session.screen0.maxDisableMove Setting default value Failed to read: session.screen0.maxDisableResize Setting default value Failed to read: session.screen0.workspacewarping Setting default value Failed to read: session.screen0.showwindowposition Setting default value Failed to read: session.screen0.autoRaise Setting default value Failed to read: session.screen0.clickRaises Setting default value Failed to read: session.screen0.defaultDeco Setting default value Failed to read: session.screen0.tab.placement Setting default value Failed to read: session.screen0.windowMenu Setting default value Failed to read: session.screen0.noFocusWhileTypingDelay Setting default value Failed to read: session.screen0.workspaces Setting default value Failed to read: session.screen0.edgeSnapThreshold Setting default value Failed to read: session.screen0.window.focus.alpha Setting default value Failed to read: session.screen0.window.unfocus.alpha Setting default value Failed to read: session.screen0.menu.alpha Setting default value Failed to read: session.screen0.menuDelay Setting default value Failed to read: session.screen0.tab.width Setting default value Failed to read: session.screen0.tooltipDelay Setting default value Failed to read: session.screen0.allowRemoteActions Setting default value Failed to read: session.screen0.clientMenu.usePixmap Setting default value Failed to read: session.screen0.tabs.usePixmap Setting default value Failed to read: session.screen0.tabs.maxOver Setting default value Failed to read: session.screen0.tabs.intitlebar Setting default value Failed to read: session.screen0.focusModel Setting default value Failed to read: session.screen0.tabFocusModel Setting default value Failed to read: session.screen0.focusNewWindows Setting default value Failed to read: session.screen0.focusSameHead Setting default value Failed to read: session.screen0.rowPlacementDirection Setting default value Failed to read: session.screen0.colPlacementDirection Setting default value Failed to read: session.screen0.windowPlacement Setting default value Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.colorsPerChannel Setting default value Failed to read: session.doubleClickInterval Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.styleOverlay Setting default value Failed to read: session.slitlistFile Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.cacheLife Setting default value Failed to read: session.cacheMax Setting default value Failed to read: session.autoRaiseDelay Setting default value Failed to read: session.screen0.opaqueMove Setting default value Failed to read: session.screen0.fullMaximization Setting default value Failed to read: session.screen0.maxIgnoreIncrement Setting default value Failed to read: session.screen0.maxDisableMove Setting default value Failed to read: session.screen0.maxDisableResize Setting default value Failed to read: session.screen0.workspacewarping Setting default value Failed to read: session.screen0.showwindowposition Setting default value Failed to read: session.screen0.autoRaise Setting default value Failed to read: session.screen0.clickRaises Setting default value Failed to read: session.screen0.defaultDeco Setting default value Failed to read: session.screen0.tab.placement Setting default value Failed to read: session.screen0.windowMenu Setting default value Failed to read: session.screen0.noFocusWhileTypingDelay Setting default value Failed to read: session.screen0.workspaces Setting default value Failed to read: session.screen0.edgeSnapThreshold Setting default value Failed to read: session.screen0.window.focus.alpha Setting default value Failed to read: session.screen0.window.unfocus.alpha Setting default value Failed to read: session.screen0.menu.alpha Setting default value Failed to read: session.screen0.menuDelay Setting default value Failed to read: session.screen0.tab.width Setting default value Failed to read: session.screen0.tooltipDelay Setting default value Failed to read: session.screen0.allowRemoteActions Setting default value Failed to read: session.screen0.clientMenu.usePixmap Setting default value Failed to read: session.screen0.tabs.usePixmap Setting default value Failed to read: session.screen0.tabs.maxOver Setting default value Failed to read: session.screen0.tabs.intitlebar Setting default value Failed to read: session.screen0.focusModel Setting default value Failed to read: session.screen0.tabFocusModel Setting default value Failed to read: session.screen0.focusNewWindows Setting default value Failed to read: session.screen0.focusSameHead Setting default value Failed to read: session.screen0.rowPlacementDirection Setting default value Failed to read: session.screen0.colPlacementDirection Setting default value Failed to read: session.screen0.windowPlacement Setting default value Failed to read: session.screen0.slit.acceptKdeDockapps Setting default value Failed to read: session.screen0.slit.autoHide Setting default value Failed to read: session.screen0.slit.maxOver Setting default value Failed to read: session.screen0.slit.placement Setting default value Failed to read: session.screen0.slit.alpha Setting default value Failed to read: session.screen0.slit.onhead Setting default value Failed to read: session.screen0.slit.layer Setting default value Failed to read: session.screen0.toolbar.autoHide Setting default value Failed to read: session.screen0.toolbar.maxOver Setting default value Failed to read: session.screen0.toolbar.visible Setting default value Failed to read: session.screen0.toolbar.widthPercent Setting default value Failed to read: session.screen0.toolbar.alpha Setting default value Failed to read: session.screen0.toolbar.layer Setting default value Failed to read: session.screen0.toolbar.onhead Setting default value Failed to read: session.screen0.toolbar.placement Setting default value Failed to read: session.screen0.toolbar.height Setting default value Failed to read: session.screen0.toolbar.tools Setting default value Failed to read: session.screen0.iconbar.mode Setting default value Failed to read: session.screen0.iconbar.alignment Setting default value Failed to read: session.screen0.iconbar.iconWidth Setting default value Failed to read: session.screen0.iconbar.iconTextPadding Setting default value Failed to read: session.screen0.iconbar.usePixmap Setting default value Failed to read: session.screen0.strftimeFormat Setting default value Failed to read: session.screen0.titlebar.left Setting default value Failed to read: session.screen0.titlebar.right Setting default value Terminated XIO: fatal IO error 10 (No child processes) on X server ":0" after 115033 requests (115033 known processed) with 0 events remaining. Quote:
|
|
|||
![]()
Hi nasser !
I've just tried pekwm .. it looks cool & similar to my favorite cwm .. I first run into a similar issue on -current .. but when I used defaults ~/.pekwm configuration dating back to OpenBSD 5.2 :-) , I got it working .. I can use the menu and lauch applications etc .. $ cat ~/.pekwm/menu Code:
# Menu config for pekwm # Variables INCLUDE = "vars" RootMenu = "Pekwm" { Entry = "Terminal" { Actions = "Exec $TERM &" } Entry = "Run.." { Actions = "ShowCmdDialog" } Separator {} Submenu = "Editors" { Entry = "vi" { Actions = "Exec $TERM -title vi -e vi &" } Entry = "vim" { Actions = "Exec $TERM -title vim -e vim &" } Entry = "gvim" { Actions = "Exec gvim &" } Entry = "Emacs" { Actions = "Exec emacs &" } Entry = "Emacs Terminal" { Actions = "Exec $TERM -title emacs -e emacs -nw &" } Entry = "Kate" { Actions = "Exec kate &" } } Submenu = "Graphics" { Entry = "display" { Actions = "Exec display &" } Entry = "Gimp" { Actions = "Exec gimp &" } Entry = "Gv" { Actions = "Exec gv &" } Entry = "Xpdf" { Actions = "Exec xpdf &" } Entry = "gqview" { Actions = "Exec gqview &" } } Submenu = "Multimedia" { Entry = "Amarok" { Actions = "Exec amarok &" } Entry = "Quod Libet" { Actions = "Exec quodlibet &" } Entry = "Xmms" { Actions = "Exec xmms &" } Entry = "MPlayer" { Actions = "Exec gmplayer &" } Entry = "Xine" { Actions = "Exec xine &" } Entry = "xawtv" { Actions = "Exec xawtv &" } Entry = "Ogle" { actions = "exec ogle &" } Entry = "alsamixer" { Actions = "Exec $TERM -title alsamixer -e alsamixer &" } } Submenu = "Utils" { Entry = "XCalc" { Actions = "Exec xcalc &" } Entry = "XMan" { Actions = "Exec xman &" } Entry = "Xpdf" { Actions = "Exec xpdf &" } Entry = "GGv" { Actions = "Exec ggv &" } Entry = "Evince" { Actions = "Exec evince &" } Entry = "gucharmap" { Actions = "Exec gucharmap &" } Entry = "Gkrellm" { Actions = "Exec gkrellm &" } Entry = "Gkrellm2" { Actions = "Exec gkrellm2 &" } Entry = "ROX Filer" { Actions = "Exec rox &" } } Submenu = "WWW" { Entry = "Dillo" { Actions = "Exec dillo &" } Entry = "Konqueror" { Actions = "Exec konqueror &" } Entry = "Mozilla" { Actions = "Exec mozilla &" } Entry = "Firefox" { Actions = "Exec firefox &" } Entry = "Mozilla Firefox" { Actions = "Exec mozilla-firefox &" } } Submenu = "FTP" { Entry = "gftp" { Actions = "Exec gftp &" } Entry = "lftp" { Actions = "Exec $TERM -title lftp -e lftp &" } } Submenu = "Communication" { Entry = "Mutt" { Actions = "Exec $TERM -title mutt -e mutt &" } Entry = "Pine" { Actions = "Exec $TERM -title pine -e pine &" } Entry = "Thunderbird" { Actions = "Exec thunderbird &" } Entry = "Mozilla Thunderbird" { Actions = "Exec mozilla-thunderbird &" } Entry = "Evolution" { Actions = "Exec evolution &" } Entry = "KMail" { Actions = "Exec kmail &" } Entry = "Gaim" { Actions = "Exec gaim &" } Entry = "Irssi" { Actions = "Exec $TERM -title irssi -e irssi &" } Entry = "Kopete" { Actions = "Exec kopete &" } } Submenu = "Office" { Entry = "KOffice Workspace" { Actions = "Exec koshell &" } Entry = "OpenOffice" { Actions = "Exec ooffice &" } Entry = "StarOffice" { Actions = "Exec soffice &" } } Submenu = "Development" { Entry = "Anjuta" { Actions = "Exec anjuta &" } Entry = "Eclipse" { Actions = "Exec eclipse &" } Entry = "KDevelop" { Actions = "Exec kdevelop &" } } Separator {} Submenu = "Go to" { SubMenu = "Workspace" { # Create goto menu once per pekwm config reload. The fast way that # will work for most if not all users. COMMAND = "/usr/local/share/pekwm/scripts/pekwm_ws_menu.sh goto" # Create goto menu every time the menu is opened. The slow way. # This is what you want if you are using external tools to make # the amount of workspaces something else than what you define in # ~/.pekwm/config. You will know if you want this. # Entry = "" { Actions = "Dynamic /usr/local/share/pekwm/scripts/pekwm_ws_menu.sh goto dynamic" } } Entry = "Window.." { Actions = "ShowMenu GotoClient True" } } Submenu = "Pekwm" { Submenu = "Themes" { Entry { Actions = "Dynamic /usr/local/share/pekwm/scripts/pekwm_themeset.sh /usr/local/share/pekwm/themes" } Entry { Actions = "Dynamic /usr/local/share/pekwm/scripts/pekwm_themeset.sh ~/.pekwm/themes" } } Entry = "Reload" { Actions = "Reload" } Entry = "Restart" { Actions = "Restart" } Entry = "Exit" { Actions = "Exit" } Submenu = "Exit to" { Entry = "Xterm" { Actions = "RestartOther xterm" } Entry = "TWM" { Actions = "RestartOther twm" } } } } WindowMenu = "Window Menu" { Entry = "(Un)Stick" { Actions = "Toggle Sticky" } Entry = "(Un)Shade" { Actions = "Toggle Shaded" } Entry = "Iconify" { Actions = "Set Iconified" } Entry = "Command.." { Actions = "ShowCmdDialog" } Submenu = "Maximize" { Entry = "Toggle Full" { Actions = "Toggle Maximized True True" } Entry = "Toggle Horizontal" { Actions = "Toggle Maximized True False" } Entry = "Toggle Vertical" { Actions = "Toggle Maximized False True" } } Submenu = "Fill" { Entry = "Full" { Actions = "MaxFill True True" } Entry = "Horizontal" { Actions = "MaxFill True False" } Entry = "Vertical" { Actions = "MaxFill False True" } } Submenu = "Stacking" { Entry = "Raise" { Actions = "Raise" } Entry = "Lower" { Actions = "Lower" } Entry = "Toggle Always On Top" { Actions = "Toggle AlwaysOnTop" } Entry = "Toggle Always Below" { Actions = "Toggle AlwaysBelow" } } Submenu = "Decorations" { Entry = "Toggle Decorations" { Actions = "Toggle DecorBorder; Toggle DecorTitlebar" } Entry = "Toggle Borders" { Actions = "Toggle DecorBorder" } Entry = "Toggle Titlebar" { Actions = "Toggle DecorTitlebar" } } Submenu = "Skip" { Entry = "Toggle showing this frame in menus" { Actions = "Toggle Skip Menus" } Entry = "Toggle including this frame in focus toggle" { Actions = "Toggle Skip FocusToggle" } Entry = "Toggle if this frame snaps to other windows" { Actions = "Toggle Skip Snap" } } SubMenu = "Send To" { # Create sendto menu once per pekwm config reload. The fast way that # will work for most if not all users. COMMAND = "/usr/local/share/pekwm/scripts/pekwm_ws_menu.sh send" # Create sendto menu every time the menu is opened. The slow way. # This is what you want if you are using external tools to make # the amount of workspaces something else than what you define in # ~/.pekwm/config. You will know if you want this. # Entry = "" { Actions = "Dynamic /usr/local/share/pekwm/scripts/pekwm_ws_menu.sh send dynamic" } } Separator {} Entry = "Close" { Actions = "Close" } Submenu = "Kill" { Entry = "Kill application" { Actions = "Kill" } } } Code:
FrameTitle { ButtonRelease = "1" { Actions = "Raise; Focus; ActivateClient" } ButtonRelease = "Mod1 1" { Actions = "Focus; Raise" } ButtonRelease = "Mod4 1" { Actions = "Focus; Raise" } ButtonRelease = "2" { Actions = "ActivateClient" } ButtonRelease = "Mod4 3" { Actions = "Close" } ButtonRelease = "3" { Actions = "ShowMenu Window" } ButtonRelease = "4" { Actions = "ActivateClientRel 1" } ButtonRelease = "5" { Actions = "ActivateClientRel -1" } ButtonRelease = "Mod1 4" { Actions = "SendToWorkspace Next; GotoWorkspace Next" } ButtonRelease = "Mod1 5" { Actions = "SendToWorkspace Prev; GotoWorkspace Prev" } ButtonRelease = "Mod1 Shift 4" { Actions = "SendToWorkspace PrevV; GotoWorkspace PrevV" } ButtonRelease = "Mod1 Shift 5" { Actions = "SendToWorkspace NextV; GotoWorkspace NextV" } ButtonRelease = "Ctrl 4" { Actions = "MoveClientRel 1" } ButtonRelease = "Ctrl 5" { Actions = "MoveClientRel -1" } ButtonRelease = "Ctrl Mod1 1" { Actions = "Focus; Raise True" } DoubleClick = "2" { Actions = "Toggle Shaded" } DoubleClick = "Mod1 2" { Actions = "Toggle Shaded" } DoubleClick = "1" { Actions = "MaxFill True True" } DoubleClick = "Mod1 1" { Actions = "Toggle Maximized True True" } Motion = "1" { Threshold = "4"; Actions = "Raise; Move" } Motion = "Mod1 1" { Threshold = "4"; Actions = "Raise; Move" } Motion = "Mod4 1" { Threshold = "4"; Actions = "Raise; Move" } Motion = "2" { Threshold = "4"; Actions = "GroupingDrag True" } Motion = "Mod1 3" { Actions = "Resize" } # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } } OtherTitle { ButtonRelease = "1" { Actions = "Raise; Focus" } ButtonRelease = "2" { Actions = "Focus" } ButtonRelease = "3" { Actions = "Close" } ButtonRelease = "Mod4 3" { Actions = "ShowMenu Window" } ButtonRelease = "Mod1 4" { Actions = "SendToWorkspace Next; GotoWorkspace Next" } ButtonRelease = "Mod1 5" { Actions = "SendToWorkspace Prev; GotoWorkspace Prev" } ButtonRelease = "Mod1 Shift 4" { Actions = "SendToWorkspace PrevV; GotoWorkspace PrevV" } ButtonRelease = "Mod1 Shift 5" { Actions = "SendToWorkspace NextV; GotoWorkspace NextV" } Motion = "1" { Threshold = "4"; Actions = "Raise; Move" } Motion = "Mod1 1" { Threshold = "4"; Actions = "Raise; Move" } Motion = "Mod4 1" { Threshold = "4"; Actions = "Raise; Move" } # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } } Border { TopLeft { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize TopLeft" } } Top { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize Top" } } TopRight { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize TopRight" } } Left { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize Left" } } Right { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize Right" } } BottomLeft { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize BottomLeft" } } Bottom { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize Bottom" } } BottomRight { # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } ButtonPress = "1" { Actions = "Focus; Resize BottomRight" } } } ScreenEdge { Down { Enter = "Mod1 Any" { Actions = "GoToWorkspace Down" } ButtonRelease = "3" { Actions = "ShowMenu Root" } ButtonRelease = "2" { Actions = "ShowMenu Goto" } ButtonRelease = "1" { Actions = "GoToWorkspace Down" } ButtonRelease = "Mod4 2" { Actions = "ShowMenu GotoClient" } ButtonRelease = "4" { Actions = "GoToWorkspace Up" } ButtonRelease = "5" { Actions = "GoToWorkspace Down" } ButtonRelease = "Mod1 4" { Actions = "GoToWorkspace PrevV" } ButtonRelease = "Mod1 5" { Actions = "GoToWorkspace NextV" } EnterMoving = "Any Any" { Actions = "WarpToWorkspace Down" } } Up { Enter = "Mod1 Any" { Actions = "GoToWorkspace Up" } ButtonRelease = "3" { Actions = "ShowMenu Root" } ButtonRelease = "2" { Actions = "ShowMenu Goto" } ButtonRelease = "1" { Actions = "GoToWorkspace Up" } ButtonRelease = "Mod4 2" { Actions = "ShowMenu GotoClient" } ButtonRelease = "4" { Actions = "GoToWorkspace Up" } ButtonRelease = "5" { Actions = "GoToWorkspace Down" } ButtonRelease = "Mod1 4" { Actions = "GoToWorkspace PrevV" } ButtonRelease = "Mod1 5" { Actions = "GoToWorkspace NextV" } EnterMoving = "Any Any" { Actions = "WarpToWorkspace Up" } } Left { Enter = "Mod1 Any" { Actions = "GoToWorkspace Left" } ButtonRelease = "3" { Actions = "ShowMenu Root" } ButtonRelease = "1" { Actions = "GoToWorkspace Left" } DoubleClick = "1" { Actions = "GoToWorkspace Left" } ButtonRelease = "2" { Actions = "ShowMenu Goto" } ButtonRelease = "Mod4 2" { Actions = "ShowMenu GotoClient" } ButtonRelease = "4" { Actions = "GoToWorkspace Right" } ButtonRelease = "5" { Actions = "GoToWorkspace Left" } ButtonRelease = "Mod1 4" { Actions = "GoToWorkspace Next" } ButtonRelease = "Mod1 5" { Actions = "GoToWorkspace Prev" } EnterMoving = "Any Any" { Actions = "WarpToWorkspace Left" } } Right { Enter = "Mod1 Any" { Actions = "GoToWorkspace Right" } ButtonRelease = "3" { Actions = "ShowMenu Root" } ButtonRelease = "1" { Actions = "GoToWorkspace Right" } DoubleClick = "1" { Actions = "GoToWorkspace Right" } ButtonRelease = "2" { Actions = "ShowMenu Goto" } ButtonRelease = "Mod4 2" { Actions = "ShowMenu GotoClient" } ButtonRelease = "4" { Actions = "GoToWorkspace Right" } ButtonRelease = "5" { Actions = "GoToWorkspace Left" } ButtonRelease = "Mod1 4" { Actions = "GoToWorkspace Next" } ButtonRelease = "Mod1 5" { Actions = "GoToWorkspace Prev" } EnterMoving = "Any Any" { Actions = "WarpToWorkspace Right" } } } Client { # Remove the following line and uncomment the alternative if windows should raise when clicked. ButtonPress = "1" { Actions = "Focus" } # Uncomment the following line if windows should raise when clicked. # ButtonPress = "1" { Actions = "Focus; Raise" } ButtonRelease = "Mod1 1" { Actions = "Focus; Raise" } ButtonRelease = "Mod4 1" { Actions = "Lower" } ButtonRelease = "Mod1 4" { Actions = "SendToWorkspace Next; GotoWorkspace Next" } ButtonRelease = "Mod1 5" { Actions = "SendToWorkspace Prev; GotoWorkspace Prev" } ButtonRelease = "Mod1 Shift 4" { Actions = "SendToWorkspace PrevV; GotoWorkspace PrevV" } ButtonRelease = "Mod1 Shift 5" { Actions = "SendToWorkspace NextV; GotoWorkspace NextV" } ButtonRelease = "Ctrl Mod1 1" { Actions = "Focus; Raise True" } Motion = "Mod1 1" { Threshold = "4"; Actions = "Focus; Raise; Move" } Motion = "Mod4 1" { Threshold = "4"; Actions = "Focus; Raise; Move" } Motion = "Mod1 2" { Threshold = "4"; Actions = "GroupingDrag True" } Motion = "Mod1 3" { Actions = "Resize" } # Remove the following line if you want to use click to focus. Enter = "Any Any" { Actions = "Focus" } } Root { ButtonRelease = "3" { Actions = "ShowMenu Root" } ButtonRelease = "2" { Actions = "ShowMenu Goto" } ButtonRelease = "Mod4 2" { Actions = "ShowMenu GotoClient" } # Horizontal movement ButtonRelease = "4" { Actions = "GoToWorkspace Right" } ButtonRelease = "5" { Actions = "GoToWorkspace Left" } ButtonRelease = "Mod1 4" { Actions = "GoToWorkspace Next" } ButtonRelease = "Mod1 5" { Actions = "GoToWorkspace Prev" } # Vertical movement ButtonRelease = "Shift 4" { Actions = "GoToWorkspace Up" } ButtonRelease = "Shift 5" { Actions = "GoToWorkspace Down" } ButtonRelease = "Mod1 Shift 4" { Actions = "GoToWorkspace NextV" } ButtonRelease = "Mod1 Shift 5" { Actions = "GoToWorkspace PrevV" } ButtonRelease = "1" { Actions = "HideAllMenus" } } Menu { Enter = "Any Any" { Actions = "Focus" } Motion = "Mod1 1" { Threshold = "4"; Actions = "Focus; Raise; Move" } } Other { Enter = "Any Any" { Actions = "Focus" } ButtonRelease = "3" { Actions = "Close" } Motion = "1" { Actions = "Focus; Raise; Move" } Motion = "Mod1 1" { Threshold = "4"; Actions = "Focus; Raise; Move" } } Code:
Files { Keys = "~/.pekwm/keys" Mouse = "~/.pekwm/mouse" Menu = "~/.pekwm/menu" Start = "~/.pekwm/start" AutoProps = "~/.pekwm/autoproperties" Theme = "/usr/local/share/pekwm/themes/default" Icons = "~/.pekwm/icons/" } MoveResize { EdgeAttract = "10" EdgeResist = "10" WindowAttract = "5" WindowResist = "5" OpaqueMove = "True" OpaqueResize = "False" } Screen { Workspaces = "9" WorkspacesPerRow = "3" WorkspaceNames = "Main;Web;E-mail;Music;Work 05;Work 06;Work 07;Work 08;Work 09" ShowFrameList = "True" ShowStatusWindow = "True" ShowStatusWindowCenteredOnRoot = "False" ShowClientID = "False" ShowWorkspaceIndicator = "500" PlaceNew = "True" FocusNew = "True" TrimTitle = "..." FullscreenAbove = "True" FullscreenDetect = "True" HonourRandr = "True" HonourAspectRatio = "True" EdgeSize = "1 1 1 1" EdgeIndent = "False" PixmapCacheSize = "20" DoubleClickTime = "250" Placement { Model = "CenteredOnParent Smart MouseNotUnder" Smart { Row = "True" TopToBottom = "True" LeftToRight = "True" OffsetX = "0" OffsetY = "0" } } UniqueNames { SetUnique = "False" Pre = " #" Post = "" } } Menu { DisplayIcons = "True" Icons = "DEFAULT" { Minimum = "16x16" Maximum = "16x16" } # To enable make separate window have other icon size restrictions, # for example wallpaper menu found in pekwm_menu_tools, set the following # for each menu you want to "free". # Icons = "Wallpaper" { # Minimum = "64x64" # Maximum = "64x64" # } # Defines how menus act on mouse input. # Possible values are: "ButtonPress ButtonRelease DoubleClick Motion" # To make submenus open on mouse over, comment the default Enter, # uncomment the alternative, and reload pekwm. Select = "Motion MotionPressed" Enter = "MotionPressed ButtonPress" # Enter = "Motion" Exec = "ButtonRelease" } CmdDialog { HistoryUnique = "True" HistorySize = "1024" HistoryFile = "~/.pekwm/history" HistorySaveInterval = "16" } Harbour { OnTop = "True" MaximizeOver = "False" Placement = "Right" Orientation = "TopToBottom" Head = "0" DockApp { SideMin = "64" SideMax = "0" } } |
|
|||
![]()
$ cat ~/.pekwm/autoproperties
Code:
/* Autoproperties. The default template and simple course of autopropping to help you add your own autoproperties. See the documentation for more keywords and the rest of what is possible through this file. First, it's good to note that you can't just make up the property string, you need to use a program called 'xprop' to show it. Please conduct the documentation. Another good tip is to make sure you have an ApplyOn entry. The autoproperties you define won't do any good if you don't tell pekwm when to apply them! Third tip. You can't match a window with more than one property. The first one that matches will be used, the rest ignored (see the gimp example). Note that the default entries are commented out, don't comment out your own autoproperties. :) */ Require { Templates = "True" } /* Group terminal applications */ # Property = "(term|rxvt),(erm|xvt)" { # ApplyOn = "New" # Group = "term" { # Size = "5" # FocusedFirst = "True" # Raise = "True" # } # } /* Remove decor of customize toolbar window of mozilla firefox. */ Property = "^(gecko|Gecko|firefox-bin),^Firefox-bin,,^Customize Toolbar\$" { ApplyOn = "Start New TransientOnly" Border = "False" Titlebar = "False" } /* Auto-group up to 10 mozilla download windows to group you call "moz-dl", using a WM_CLASS and specifying the the download window using the begining of its title. Make the windows go to the top-left corner of your workspace and place them under other windows. Do this when new windows show up, also to so called transient windows. */ # Property = "^mozilla-bin,^Mozilla-bin,,^Saving" { # ApplyOn = "New Transient" # Group = "moz-dl" { Size = "10" } # FrameGeometry = "+0+0" # Layer = "Below" # } /* Group together up to two windows that have a WM_CLASS that matches the property. Start these windows on workspace two. */ # Property = "^Mozilla,^navigator:browser" { # ApplyOn = "Start New Workspace" # Workspace = "2" # } /* Group together an infinite number of windows that match the property. When new windows are opened to this group, never make them the active window of the group, but open them in the background. Make these autoproperties apply on every pekwm start or when a new window is opened. */ # Property = "^dillo,^Dillo" { # ApplyOn = "Start New" # Group = "dillo" { Size = "0"; Behind = "True" } # } /* Put property matching windows under other windows and make the window appear on every workspace. Do not show matching windows on the pekwm goto menus, do not include them in frame switching (mod1+tab) and do not let other windows snap to them. Do this on pekwm start or when new window is opened, also include transient windows (in the example, xmms playlist and equalizer are transients). */ # Property = ".*,^xmms" { # ApplyOn = "Start New Transient" # Layer = "Desktop" # Sticky = "True" # Skip = "Menus FocusToggle Snap" # } /* Remove Gimp windows from the menus, only show the main toolbox window. Use the WM_WINDOW_ROLE to tell the difference between gimp windows. First make sure the toolbox window doesn't get confused with the rest of the windows. This just tells pekwm to ignore any matches for the toolbox later on. Without this, the toolbox would match with "the rest of the windows" and get ignored from the pekwm menus! We don't want that. */ # Property = "^gimp,^Gimp,gimp-toolbox" { # ApplyOn = "Start New" # } /* The Crop dialog always gets in the way, put it in the corner but place it above other windows anyways. Don't show the window in pekwm menus. */ # Property = "^gimp,^Gimp,gimp-crop-tool" { # ApplyOn = "Start New" # Layer = "OnTop" # FrameGeometry = "+0+0" # Skip = "Menus" # } /* The rest of the gimp windows should not show in pekwm menus eather. */ # Property = ".gimp,^Gimp" { # ApplyOn = "Start New" # Skip = "Menus"; # } /* This should start making sense to you by now. */ # Property = "^gkrellm,^Gkrellm" { # ApplyOn = "Start New" # Sticky = "True" # Skip = "Menus FocusToggle" # Layer = "Desktop" # } /* Some useful standard application xclock xload and xbiff. This should be fairly clear to you. In addition to what you've allready learned, we make the windows appear without titlebars and borders. We are also using the geometry in all its glory, defining the windows size in addition to its position. */ # Property = "^xclock,^XClock" { # ApplyOn = "Start New" # ClientGeometry = "120x137+0-137" # Border = "False"; Titlebar = "False" # Sticky = "True" # Layer = "Desktop" # Skip = "Menus FocusToggle Snap" # } # # Property = "^xload,^XLoad" { # ApplyOn = "Start New" # ClientGeometry = "560x137+120-137" # Border = "False"; Titlebar = "False" # Sticky = "True" # Layer = "Desktop" # Skip = "Menus FocusToggle Snap" # } # # Property = "^xbiff,^XBiff" { # ApplyOn = "Start New" # ClientGeometry = "120x137-120-137" # Border = "False"; Titlebar = "False" # Sticky = "True" # Layer = "Desktop" # Skip = "Menus FocusToggle Snap" # } // End of autoproperties. ------------------------- TypeRules { /* Desktop windows such as nautilus window in gnome. These should cover the root window and be below all other windows. Also they should not be included in the menu and in snapping. */ Property = "DESKTOP" { FrameGeometry = "0x0+0+0" Titlebar = "False" Border = "False" Sticky = "True" Skip = "FocusToggle Menus Snap" Layer = "Desktop" Focusable = "False" } Property = "DOCK" { Titlebar = "False" Border = "False" Sticky = "True" Layer = "Dock" Skip = "FocusToggle Menus" Focusable = "False" } Property = "TOOLBAR" { Skip = "FocusToggle Menus Snap" } Property = "MENU" { Titlebar = "False" Border = "False" Skip = "FocusToggle Menus Snap" } Property = "UTILITY" { } Property = "SPLASH" { Titlebar = "False" Border = "False" Layer = "OnTop" } Property = "DIALOG" { Layer = "OnTop" } Property = "NORMAL" { } } /* Next, we do some siple window title rewriting. To make it simple, you can automatically make some windows get their title edited. Cut out an annoying piece, add text, replace text. This all happens in it's own section "TitleRules {}". I don't like the way dillo uses its titlebar, it says "Dillo: webpage". I want that "Dillo:" part to not show in the beginning, instead I want to make it show as "webpage - dillo". Then again, the "webpage - Mozilla Firefox" is too long for my taste. I shorten it in the second titlerule. And I'll place the shortened text in the beginning of the title just as a show how. */ # TitleRules { # Property = "^dillo,^Dillo" { # Rule = "/Dillo: (.*)/\\1 - dillo/" # } # Property = "^firefox-bin,^Firefox-bin" { # Rule = "/(.*) - Mozilla Firefox/MF: \\1/" # } # } // End of titlerules. ----------------------------- /* Then for some harbour ordering done in it's own "Harbour {}" section. This is simple really, but you might want to check the documentation on how the positions work. Obpager is allways the last dockapp, the cpuload application is the first, and wmnd will get placed in the centre. */ # Harbour { # Property = "^obpager,^obpager" { # Position = "-1" # } # Property = ".*,.*cpuload" { # Position = "1" # } # Property = ".*,^wmnd" { # Position = "0" # } # } // End of harbour order rules. -------------------- /* Last, if you have a theme that supports it, or you have hacked one up yourself, you can use the "DecorRules {}" section to make windows show up with independent decorations. Here we tell our terminal windows to use the special TERM decoration section found from your theme. Note that this _needs_ a theme that supports it. */ # DecorRules { # Property = "^term,^xterm" { # Decor = "TERM" # } # } $ cat ~/.pekwm/keys Code:
[INCLUDE = "vars" Global { # - - ----------------------------------------------- - - # Simple bindings to most frequently used actions. # # Adding your own frequently used actions is easy - # just copy it over from CHAINS and edit the keypress! # Moving in frames KeyPress = "Mod1 Tab" { Actions = "NextFrame EndRaise" } KeyPress = "Mod1 Shift Tab" { Actions = "PrevFrame EndRaise" } KeyPress = "Mod1 Ctrl Tab" { Actions = "NextFrameMRU EndRaise" } KeyPress = "Mod1 Ctrl Shift Tab" { Actions = "PrevFrameMRU EndRaise" } KeyPress = "Mod4 Tab" { Actions = "ActivateClientRel 1" } KeyPress = "Mod4 Shift Tab" { Actions = "ActivateClientRel -1" } KeyPress = "Mod4 Ctrl Right" { Actions = "MoveClientRel 1" } KeyPress = "Mod4 Ctrl Left" { Actions = "MoveClientRel -1" } KeyPress = "Mod4 Left" { Actions = "FocusDirectional Left" } KeyPress = "Mod4 Right" { Actions = "FocusDirectional Right" } KeyPress = "Mod4 Up" { Actions = "FocusDirectional Up" } KeyPress = "Mod4 Down" { Actions = "FocusDirectional Down" } # Moving in workspaces KeyPress = "Ctrl Mod1 Left" { Actions = "GotoWorkspace Left" } KeyPress = "Ctrl Mod1 Right" { Actions = "GotoWorkspace Right" } KeyPress = "Ctrl Mod1 Up" { Actions = "GotoWorkspace Up" } KeyPress = "Ctrl Mod1 Down" { Actions = "GotoWorkspace Down" } KeyPress = "Mod4 1" { Actions = "GotoWorkspace 1" } KeyPress = "Mod4 2" { Actions = "GotoWorkspace 2" } KeyPress = "Mod4 3" { Actions = "GotoWorkspace 3" } KeyPress = "Mod4 4" { Actions = "GotoWorkspace 4" } KeyPress = "Mod4 5" { Actions = "GotoWorkspace 5" } KeyPress = "Mod4 6" { Actions = "GotoWorkspace 6" } KeyPress = "Mod4 7" { Actions = "GotoWorkspace 7" } KeyPress = "Mod4 8" { Actions = "GotoWorkspace 8" } KeyPress = "Mod4 9" { Actions = "GotoWorkspace 9" } KeyPress = "Ctrl Mod1 Shift Left" { Actions = "SendToWorkspace Next; GoToWorkspace Next" } KeyPress = "Ctrl Mod1 Shift Right" { Actions = "SendToWorkspace Prev; GoToWorkspace Prev" } KeyPress = "Ctrl Mod1 Shift Up" { Actions = "SendToWorkspace NextV; GoToWorkspace NextV" } KeyPress = "Ctrl Mod1 Shift Down" { Actions = "SendToWorkspace PrevV; GoToWorkspace PrevV" } KeyPress = "Mod4 F1" { Actions = "SendToWorkspace 1" } KeyPress = "Mod4 F2" { Actions = "SendToWorkspace 2" } KeyPress = "Mod4 F3" { Actions = "SendToWorkspace 3" } KeyPress = "Mod4 F4" { Actions = "SendToWorkspace 4" } KeyPress = "Mod4 F5" { Actions = "SendToWorkspace 5" } KeyPress = "Mod4 F6" { Actions = "SendToWorkspace 6" } KeyPress = "Mod4 F7" { Actions = "SendToWorkspace 7" } KeyPress = "Mod4 F8" { Actions = "SendToWorkspace 8" } KeyPress = "Mod4 F9" { Actions = "SendToWorkspace 9" } # Simple window management KeyPress = "Mod4 M" { Actions = "Toggle Maximized True True" } KeyPress = "Mod4 G" { Actions = "Maxfill True True" } KeyPress = "Mod4 F" { Actions = "Toggle FullScreen" } KeyPress = "Mod4 Return" { Actions = "MoveResize" } KeyPress = "Mod4 Q" { Actions = "Close" } KeyPress = "Mod4 S" { Actions = "Toggle Shaded" } KeyPress = "Mod4 I" { Actions = "Toggle Iconified" } # Marking KeyPress = "Mod4 Z" { Actions = "Toggle Marked" } KeyPress = "Mod4 A" { Actions = "AttachMarked" } # Tagging KeyPress = "Mod4 T" { Actions = "Toggle Tagged False" } # Menus KeyPress = "Mod4 R" { Actions = "ShowMenu Root" } KeyPress = "Mod4 W" { Actions = "ShowMenu Window" } KeyPress = "Mod4 L" { Actions = "ShowMenu Goto" } KeyPress = "Mod4 C" { Actions = "ShowMenu GotoClient" } KeyPress = "Mod4 Shift I" { Actions = "ShowMenu Icon" } KeyPress = "Mod4 X" { Actions = "HideAllMenus" } # External Commands KeyPress = "Mod4 E" { Actions = "Exec $TERM" } # Pekwm control KeyPress = "Ctrl Mod1 Delete" { Actions = "Reload" } KeyPress = "Mod4 D" { Actions = "ShowCmdDialog" } KeyPress = "Mod4 V" { Actions = "ShowSearchDialog" } KeyPress = "Mod4 H" { Actions = "Toggle HarbourHidden" } # - - ----------------------------------------------- - - # CHAINS. These give you access to just about everything. # Move to Corner Chain = "Ctrl Mod1 C" { KeyPress = "Q" { Actions = "MoveToEdge TopLeft" } KeyPress = "Y" { Actions = "MoveToEdge TopCenterEdge" } KeyPress = "W" { Actions = "MoveToEdge TopCenterEdge" } KeyPress = "Shift Y" { Actions = "MoveToEdge TopEdge" } KeyPress = "Shift W" { Actions = "MoveToEdge TopEdge" } KeyPress = "P" { Actions = "MoveToEdge TopRight" } KeyPress = "E" { Actions = "MoveToEdge TopRight" } KeyPress = "A" { Actions = "MoveToEdge LeftCenterEdge" } KeyPress = "Shift A" { Actions = "MoveToEdge LeftEdge" } KeyPress = "L" { Actions = "MoveToEdge RightCenterEdge" } KeyPress = "D" { Actions = "MoveToEdge RightCenterEdge" } KeyPress = "Shift L" { Actions = "MoveToEdge RightEdge" } KeyPress = "Shift D" { Actions = "MoveToEdge RightEdge" } KeyPress = "Z" { Actions = "MoveToEdge BottomLeft" } KeyPress = "B" { Actions = "MoveToEdge BottomCenterEdge" } KeyPress = "X" { Actions = "MoveToEdge BottomCenterEdge" } KeyPress = "Shift B" { Actions = "MoveToEdge BottomEdge" } KeyPress = "Shift X" { Actions = "MoveToEdge BottomEdge" } KeyPress = "M" { Actions = "MoveToEdge BottomRight" } KeyPress = "C" { Actions = "MoveToEdge BottomRight" } KeyPress = "H" { Actions = "MoveToEdge Center" } KeyPress = "S" { Actions = "MoveToEdge Center" } } # Menus Chain = "Ctrl Mod1 M" { KeyPress = "R" { Actions = "ShowMenu Root" } KeyPress = "W" { Actions = "ShowMenu Window" } KeyPress = "I" { Actions = "ShowMenu Icon" } KeyPress = "G" { Actions = "ShowMenu Goto" } KeyPress = "C" { Actions = "ShowMenu GotoClient" } KeyPress = "D" { Actions = "ShowMenu Decor" } KeyPress = "A" { Actions = "ShowMenu AttachClientInFrame" } KeyPress = "F" { Actions = "ShowMenu AttachFrameInFrame" } Keypress = "Shift A" { Actions = "ShowMenu AttachClient" } Keypress = "Shift F" { Actions = "ShowMenu AttachFrame" } KeyPress = "X" { Actions = "HideAllMenus" } } # Grouping Chain = "Ctrl Mod1 T" { KeyPress = "T" { Actions = "Toggle Tagged False" } KeyPress = "B" { Actions = "Toggle Tagged True" } KeyPress = "C" { Actions = "Unset Tagged" } KeyPress = "G" { Actions = "Toggle GlobalGrouping" } KeyPress = "M" { Actions = "Toggle Marked" } KeyPress = "A" { Actions = "AttachMarked" } KeyPress = "D" { Actions = "Detach" } Keypress = "P" { Actions = "AttachClientInNextFrame" } KeyPress = "O" { Actions = "AttachClientInPrevFrame" } Keypress = "I" { Actions = "AttachFrameInNextFrame" } KeyPress = "U" { Actions = "AttachFrameInPrevFrame" } } # Decor Toggles Chain = "Ctrl Mod1 D" { KeyPress = "B" { Actions = "Toggle DecorBorder" } KeyPress = "T" { Actions = "Toggle DecorTitlebar" } KeyPress = "D" { Actions = "Toggle DecorBorder; Toggle DecorTitlebar" } } # Window Actions Chain = "Ctrl Mod1 A" { Chain = "G" { KeyPress = "G" { Actions = "MaxFill True True" } KeyPress = "V" { Actions = "MaxFill False True" } KeyPress = "H" { Actions = "MaxFill True False" } } Chain = "M" { KeyPress = "M" { Actions = "Toggle Maximized True True" } KeyPress = "V" { Actions = "Toggle Maximized False True" } KeyPress = "H" { Actions = "Toggle Maximized True False" } } Chain = "Q" { KeyPress = "Q" { Actions = "Close" } KeyPress = "F" { Actions = "CloseFrame" } KeyPress = "K" { Actions = "Kill" } } KeyPress = "S" { Actions = "Toggle Shaded" } KeyPress = "A" { Actions = "Toggle Sticky" } KeyPress = "O" { Actions = "Toggle AlwaysOnTop" } KeyPress = "B" { Actions = "Toggle AlwaysBelow" } KeyPress = "I" { Actions = "Set Iconified" } KeyPress = "R" { Actions = "Raise" } KeyPress = "Shift R" { Actions = "Raise True" } KeyPress = "L" { Actions = "Lower" } KeyPress = "Shift L" { Actions = "Lower True" } KeyPress = "X" { Actions = "ActivateOrRaise" } KeyPress = "Return" { Actions = "MoveResize" } KeyPress = "F" { Actions = "Toggle Fullscreen" } KeyPress = "Left" { Actions = "GrowDirection Left" } KeyPress = "Right" { Actions = "GrowDirection Right" } KeyPress = "Up" { Actions = "GrowDirection Up" } KeyPress = "Down" { Actions = "GrowDirection Down" } } # Moving in Frames Chain = "Ctrl Mod1 F" { KeyPress = "P" { Actions = "NextFrame AlwaysRaise" } KeyPress = "O" { Actions = "PrevFrame AlwaysRaise" } KeyPress = "Shift P" { Actions = "NextFrameMRU EndRaise" } KeyPress = "Shift O" { Actions = "PrevFrameMRU EndRaise" } KeyPress = "I" { Actions = "ActivateClientRel 1" } KeyPress = "U" { Actions = "ActivateClientRel -1" } KeyPress = "Shift I" { Actions = "MoveClientRel 1" } KeyPress = "Shift U" { Actions = "MoveClientRel -1" } KeyPress = "Up" { Actions = "FocusDirectional Up" } KeyPress = "Down" { Actions = "FocusDirectional Down" } KeyPress = "Left" { Actions = "FocusDirectional Left" } Keypress = "Right" { Actions = "FocusDirectional Right" } KeyPress = "1" { Actions = "ActivateClientNum 1" } KeyPress = "2" { Actions = "ActivateClientNum 2" } KeyPress = "3" { Actions = "ActivateClientNum 3" } KeyPress = "4" { Actions = "ActivateClientNum 4" } KeyPress = "5" { Actions = "ActivateClientNum 5" } KeyPress = "6" { Actions = "ActivateClientNum 6" } KeyPress = "7" { Actions = "ActivateClientNum 7" } KeyPress = "8" { Actions = "ActivateClientNum 8" } KeyPress = "9" { Actions = "ActivateClientNum 9" } KeyPress = "0" { Actions = "ActivateClientNum 10" } KeyPress = "C" { Actions = "ShowCmdDialog GotoClientID " } } # Workspaces Chain = "Ctrl Mod1 W" { KeyPress = "Right" { Actions = "GoToWorkspace Right" } KeyPress = "Left" { Actions = "GoToWorkspace Left" } KeyPress = "N" { Actions = "GoToWorkspace Next" } KeyPress = "P" { Actions = "GoToWorkspace Prev" } KeyPress = "1" { Actions = "GoToWorkspace 1" } KeyPress = "2" { Actions = "GoToWorkspace 2" } KeyPress = "3" { Actions = "GoToWorkspace 3" } KeyPress = "4" { Actions = "GoToWorkspace 4" } KeyPress = "5" { Actions = "GoToWorkspace 5" } KeyPress = "6" { Actions = "GoToWorkspace 6" } KeyPress = "7" { Actions = "GoToWorkspace 7" } KeyPress = "8" { Actions = "GoToWorkspace 8" } KeyPress = "9" { Actions = "GoToWorkspace 9" } KeyPress = "Up" { Actions = "SendToWorkspace Next; GoToWorkspace Next" } KeyPress = "Down" { Actions = "SendToWorkspace Prev; GoToWorkspace Prev" } KeyPress = "F1" { Actions = "SendToWorkspace 1" } KeyPress = "F2" { Actions = "SendToWorkspace 2" } KeyPress = "F3" { Actions = "SendToWorkspace 3" } KeyPress = "F4" { Actions = "SendToWorkspace 4" } KeyPress = "F5" { Actions = "SendToWorkspace 5" } KeyPress = "F6" { Actions = "SendToWorkspace 6" } KeyPress = "F7" { Actions = "SendToWorkspace 7" } KeyPress = "F8" { Actions = "SendToWorkspace 8" } KeyPress = "F9" { Actions = "SendToWorkspace 9" } } # External commands Chain = "Ctrl Mod1 E" { KeyPress = "E" { Actions = "Exec $TERM" } KeyPress = "L" { Actions = "Exec xlock -mode blank &" } KeyPress = "S" { Actions = "Exec scrot &" } KeyPress = "C" { Actions = "ShowCmdDialog" } } # Wm actions Chain = "Ctrl Mod1 P" { KeyPress = "Delete" { Actions = "Reload" } KeyPress = "Next" { Actions = "Restart" } KeyPress = "End" { Actions = "Exit" } KeyPress = "Prior" { Actions = "RestartOther twm" } KeyPress = "D" { Actions = "ShowCmdDialog" } KeyPress = "H" { Actions = "Toggle HarbourHidden" } } # Skipping Chain = "Ctrl Mod1 S" { Keypress = "M" { Actions = "Toggle Skip Menus" } Keypress = "F" { Actions = "Toggle Skip FocusToggle" } Keypress = "S" { Actions = "Toggle Skip Snap" } } } # Keys when MoveResize is active MoveResize { KeyPress = "Left" { Actions = "MoveHorizontal -10" } KeyPress = "Right" { Actions = "MoveHorizontal 10" } KeyPress = "Up" { Actions = "MoveVertical -10" } KeyPress = "Down" { Actions = "MoveVertical 10" } Keypress = "Shift Left" { Actions = "MoveHorizontal -1" } Keypress = "Shift Right" { Actions = "MoveHorizontal 1" } Keypress = "Shift Up" { Actions = "MoveVertical -1" } Keypress = "Shift Down" { Actions = "MoveVertical 1" } Keypress = "Mod4 Left" { Actions = "ResizeHorizontal -10" } Keypress = "Mod4 Right" { Actions = "ResizeHorizontal 10" } Keypress = "Mod4 Up" { Actions = "ResizeVertical -10" } Keypress = "Mod4 Down" { Actions = "ResizeVertical 10" } Keypress = "Mod1 Left" { Actions = "ResizeHorizontal -10" } Keypress = "Mod1 Right" { Actions = "ResizeHorizontal 10" } Keypress = "Mod1 Up" { Actions = "ResizeVertical -10" } Keypress = "Mod1 Down" { Actions = "ResizeVertical 10" } Keypress = "Shift Mod4 Left" { Actions = "ResizeHorizontal -1" } Keypress = "Shift Mod4 Right" { Actions = "ResizeHorizontal 1" } Keypress = "Shift Mod4 Up" { Actions = "ResizeVertical -1" } Keypress = "Shift Mod4 Down" { Actions = "ResizeVertical 1" } Keypress = "Shift Mod1 Left" { Actions = "ResizeHorizontal -1" } Keypress = "Shift Mod1 Right" { Actions = "ResizeHorizontal 1" } Keypress = "Shift Mod1 Up" { Actions = "ResizeVertical -1" } Keypress = "Shift Mod1 Down" { Actions = "ResizeVertical 1" } Keypress = "s" { Actions = "MoveSnap" } Keypress = "Escape" { Actions = "Cancel" } Keypress = "q" { Actions = "Cancel" } Keypress = "Return" { Actions = "End" } } # Keys for CmdDialog editing InputDialog { KeyPress = "Left" { Actions = "CursPrev" } KeyPress = "Right" { Actions = "CursNext" } KeyPress = "Ctrl A" { Actions = "CursBegin" } KeyPress = "Ctrl E" { Actions = "CursEnd" } KeyPress = "BackSpace" { Actions = "Erase;CompleteAbort" } KeyPress = "Ctrl K" { Actions = "ClearFromCursor" } KeyPress = "Ctrl C" { Actions = "Clear" } KeyPress = "Return" { Actions = "Exec" } KeyPress = "Escape" { Actions = "Close" } KeyPress = "Up" { Actions = "HistPrev" } KeyPress = "Down" { Actions = "HistNext" } KeyPress = "Ctrl P" { Actions = "HistPrev" } KeyPress = "Ctrl N" { Actions = "HistNext" } KeyPress = "Ctrl B" { Actions = "CursPrev" } KeyPress = "Ctrl F" { Actions = "CursNext" } KeyPress = "Tab" { Actions = "Complete" } KeyPress = "Any Any" { Actions = "Insert" } } # Keys working in menus Menu { KeyPress = "Down" { Actions = "NextItem" } KeyPress = "Up" { Actions = "PrevItem" } KeyPress = "Ctrl N" { Actions = "NextItem" } KeyPress = "Ctrl P" { Actions = "PrevItem" } KeyPress = "Left" { Actions = "LeaveSubmenu" } KeyPress = "Right" { Actions = "EnterSubmenu" } KeyPress = "Return" { Actions = "Select" } KeyPress = "space" { Actions = "Select" } KeyPress = "Escape" { Actions = "Close" } KeyPress = "Q" { Actions = "Close" } } |
|
|||
![]()
The fact that you have the default background and the pointer means that something is starting be it fvwm, twm, cwm or pekwm.
One way to check would be to switch terminals and either run $ top or $ ps aux
Last edited by shep; 29th November 2013 at 04:19 PM. |
|
|||
![]()
Many thanks to everyone!
I could solve it by copying daemonfowl's configuration files. |
|
||||
![]()
I see this problem is solved, but just to add some extra information:
Quote:
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things. |
![]() |
Tags |
openbsd 5.4, pekwm, window manager |
|
|