|
OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
|
Thread Tools | Display Modes |
|
|
|||
Displayport problem with openbsd
external Monitor with Displayport connection to the Dockingstation no dmesg entry
Hi i have some problems to setup my external Monitor in OpenBSD 5.3 I have a ThinkPad T420 i5 16 GB RAM Intel HD 3000 Graphicard Hitachi SATA 320 GB OpenBSD snapshot 5.3 from March first of all startx works fine as root or user if the Laptop was without docking into a dockingstation and no external Monitor is plugged. My setup at home: Laptop is plugged in the dockingstation display is closed and an external NEC PA241W is plugged in per Displayport. what works: boot from OpenBSD but not at the right resolution 1920x1200 what not works: when i startx as root or user the Monitor switches on and 2 sec later off strg^alt^backspace wont work so i must make a hard reset then i try DVI as link laptop display closed+docked+NEC+DVI what works: boot process till prompt is ok only the resolution is not 1920x1200 X works :-) as root and user but the resolution is 1440x900 my Laptop has 1600x900 so i think the problem is the identification of the displayport connection am i right? archlinux +(.xinitrc) and windows 7 worked with Displayport well next dmesg,xdpyinfo,xrandr and Xorg.0.log xdpyinfo and xrandr wont work when linked with Displayport because no X is started xrandr with Displayport and DVI i hope i explained it well my englisch is not so good:-) dmesg Code:
OpenBSD 5.3 (GENERIC) #49: Fri Mar 1 09:06:56 MST 2013 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 17056788480 (16266MB) avail mem = 16580284416 (15812MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (67 entries) bios0: vendor LENOVO version "83ET69WW (1.39 )" date 03/26/2012 bios0: LENOVO 4180MBU acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT UEFI UEFI UEFI acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EHC1(S3) EHC2(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, 2591.94 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus 5 (EXP4) acpiprt5 at acpi0: bus 13 (EXP5) acpicpu0 at acpi0: C3, C1, PSS acpipwrres0 at acpi0: PUBS acpitz0 at acpi0: critical temperature is 98 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "42T4791" serial 18531 type LION oem "SANYO" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 cpu0: Enhanced SpeedStep 2591 MHz: speeds: 2601, 2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1: apic 2 int 16 drm0 at inteldrm0 "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com com2 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo com2: probed fifo depth: 0 bytes em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address 00:21:cc:49:fc:72 ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi azalia0: codecs: Conexant/0x506e, Conexant/0x2c06, Intel/0x2805, using Conexant/0x506e audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi pci2 at ppb1 bus 3 iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address a0:88:b4:06:ab:78 ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi pci3 at ppb2 bus 5 ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi pci4 at ppb3 bus 13 sdhc0 at pci4 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16 sdmmc0 at sdhc0 ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS72503, PC3Z> SCSI3 0/direct fixed naa.5000cca645db645d sd0: 305245MB, 512 bytes/sector, 625142448 sectors cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GT33N, LT20> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-10600 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3 ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/7.48 addr 4 uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/7.51 addr 5 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (78c178379ddc8220.a) swap on sd0b dump on sd0b hw.sensors.cpu0.temp0=39.00 degC hw.sensors.acpitz0.temp0=38.00 degC (zone temperature) hw.sensors.acpibat0.volt0=10.80 VDC (voltage) hw.sensors.acpibat0.volt1=12.08 VDC (current voltage) hw.sensors.acpibat0.power0=29.62 W (rate) hw.sensors.acpibat0.watthour0=40.08 Wh (last full capacity) hw.sensors.acpibat0.watthour1=2.00 Wh (warning capacity) hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity) hw.sensors.acpibat0.watthour3=25.90 Wh (remaining capacity), OK hw.sensors.acpibat0.raw0=2 (battery charging), OK hw.sensors.acpiac0.indicator0=On (power supply) hw.sensors.acpithinkpad0.temp0=38.00 degC hw.sensors.acpithinkpad0.temp1=38.00 degC hw.sensors.acpithinkpad0.temp2=38.00 degC hw.sensors.acpithinkpad0.temp3=38.00 degC hw.sensors.acpithinkpad0.temp4=38.00 degC hw.sensors.acpithinkpad0.temp5=38.00 degC hw.sensors.acpithinkpad0.temp6=38.00 degC hw.sensors.acpithinkpad0.temp7=38.00 degC hw.sensors.acpithinkpad0.fan0=1985 RPM hw.sensors.aps0.temp0=34.00 degC hw.sensors.aps0.temp1=34.00 degC hw.sensors.aps0.indicator0=Off (Keyboard Active) hw.sensors.aps0.indicator1=Off (Mouse Active) hw.sensors.aps0.indicator2=On (Lid Open) hw.sensors.aps0.raw0=509 (X_ACCEL) hw.sensors.aps0.raw1=510 (Y_ACCEL) hw.sensors.aps0.raw2=509 (X_VAR) hw.sensors.aps0.raw3=510 (Y_VAR) Code:
name of display: :0 version number: 11.0 vendor string: The X.Org Foundation vendor release number: 11203000 X.Org version: 1.12.3 maximum request size: 16777212 bytes motion buffer size: 256 bitmap unit, bit order, padding: 32, LSBFirst, 32 image byte order: LSBFirst number of supported pixmap formats: 7 supported pixmap formats: depth 1, bits_per_pixel 1, scanline_pad 32 depth 4, bits_per_pixel 8, scanline_pad 32 depth 8, bits_per_pixel 8, scanline_pad 32 depth 15, bits_per_pixel 16, scanline_pad 32 depth 16, bits_per_pixel 16, scanline_pad 32 depth 24, bits_per_pixel 32, scanline_pad 32 depth 32, bits_per_pixel 32, scanline_pad 32 keycode range: minimum 8, maximum 255 focus: window 0x80000d, revert to Parent number of extensions: 27 BIG-REQUESTS Composite DAMAGE DOUBLE-BUFFER DPMS DRI2 GLX Generic Event Extension MIT-SCREEN-SAVER MIT-SHM RANDR RECORD RENDER SECURITY SGI-GLX SHAPE SYNC X-Resource XC-MISC XFIXES XFree86-DGA XFree86-VidModeExtension XINERAMA XInputExtension XKEYBOARD XTEST XVideo default screen number: 0 number of screens: 1 screen #0: dimensions: 1600x900 pixels (423x238 millimeters) resolution: 96x96 dots per inch depths (7): 24, 1, 4, 8, 15, 16, 32 root window id: 0x121 depth of root window: 24 planes number of colormaps: minimum 1, maximum 1 default colormap: 0x20 default number of colormap cells: 256 preallocated pixels: black 0, white 16777215 options: backing-store NO, save-unders NO largest cursor: 64x64 current input event mask: 0x58003d KeyPressMask ButtonPressMask ButtonReleaseMask EnterWindowMask LeaveWindowMask SubstructureNotifyMask SubstructureRedirectMask PropertyChangeMask number of visuals: 64 default visual id: 0x21 visual: visual id: 0x21 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits Code:
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 4096 x 4096 VGA disconnected (normal left inverted right x axis y axis) LVDS connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm 1600x900 60.0*+ 40.0 HDMI-3 disconnected (normal left inverted right x axis y axis) HDMI-4 disconnected (normal left inverted right x axis y axis) HDMI-5 connected 1440x900+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 59.9 1400x1050 59.9 1280x1024 75.0 60.0 1440x900 59.9* 1366x768 59.8 1152x864 75.0 1280x720 60.0 1024x768 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 xrandr_with_displayport_and_opened_laptop_display NEC was not recognized :-( Code:
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 4096 x 4096 VGA disconnected (normal left inverted right x axis y axis) LVDS connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm 1600x900 60.0*+ 40.0 HDMI-3 disconnected (normal left inverted right x axis y axis) HDMI-4 disconnected (normal left inverted right x axis y axis) HDMI-5 disconnected (normal left inverted right x axis y axis) Code:
[ 305.893] (--) checkDevMem: using aperture driver /dev/xf86 [ 305.913] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) [ 305.959] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 305.959] X Protocol Version 11, Revision 0 [ 305.959] Build Operating System: OpenBSD 5.3 amd64 [ 305.959] Current Operating System: OpenBSD puffy.my.domain 5.3 GENERIC#49 amd64 [ 305.959] Build Date: 27 February 2013 04:27:07PM [ 305.960] [ 305.960] Current version of pixman: 0.28.0 [ 305.960] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 305.960] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 305.960] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 8 20:19:26 2013 [ 305.991] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 305.992] (==) No Layout section. Using the first Screen section. [ 305.993] (==) No screen section available. Using defaults. [ 305.993] (**) |-->Screen "Default Screen Section" (0) [ 305.993] (**) | |-->Monitor "<default monitor>" [ 305.993] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 305.993] (==) Disabling SIGIO handlers for input devices [ 305.993] (==) Automatically adding devices [ 305.993] (==) Automatically enabling devices [ 306.128] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 306.128] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 306.128] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 306.128] (II) Loader magic: 0x1b27410b53e0 [ 306.128] (II) Module ABI versions: [ 306.128] X.Org ANSI C Emulation: 0.4 [ 306.128] X.Org Video Driver: 12.0 [ 306.128] X.Org XInput driver : 16.0 [ 306.128] X.Org Server Extension : 6.0 [ 306.129] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64 [ 306.129] (II) LoadModule: "extmod" [ 306.158] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so [ 306.163] (II) Module extmod: vendor="X.Org Foundation" [ 306.163] compiled for 1.12.3, module version = 1.0.0 [ 306.163] Module class: X.Org Server Extension [ 306.163] ABI class: X.Org Server Extension, version 6.0 [ 306.163] (II) Loading extension MIT-SCREEN-SAVER [ 306.163] (II) Loading extension XFree86-VidModeExtension [ 306.163] (II) Loading extension XFree86-DGA [ 306.163] (II) Loading extension DPMS [ 306.163] (II) Loading extension XVideo [ 306.163] (II) Loading extension XVideo-MotionCompensation [ 306.164] (II) Loading extension X-Resource [ 306.164] (II) LoadModule: "dbe" [ 306.165] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so [ 306.165] (II) Module dbe: vendor="X.Org Foundation" [ 306.165] compiled for 1.12.3, module version = 1.0.0 [ 306.165] Module class: X.Org Server Extension [ 306.165] ABI class: X.Org Server Extension, version 6.0 [ 306.165] (II) Loading extension DOUBLE-BUFFER [ 306.165] (II) LoadModule: "glx" [ 306.167] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 306.168] (II) Module glx: vendor="X.Org Foundation" [ 306.168] compiled for 1.12.3, module version = 1.0.0 [ 306.168] ABI class: X.Org Server Extension, version 6.0 [ 306.169] (==) AIGLX enabled [ 306.169] (II) Loading extension GLX [ 306.169] (II) LoadModule: "record" [ 306.170] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so [ 306.171] (II) Module record: vendor="X.Org Foundation" [ 306.171] compiled for 1.12.3, module version = 1.13.0 [ 306.171] Module class: X.Org Server Extension [ 306.171] ABI class: X.Org Server Extension, version 6.0 [ 306.171] (II) Loading extension RECORD [ 306.171] (II) LoadModule: "dri" [ 306.172] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so [ 306.181] (II) Module dri: vendor="X.Org Foundation" [ 306.181] compiled for 1.12.3, module version = 1.0.0 [ 306.181] ABI class: X.Org Server Extension, version 6.0 [ 306.181] (II) Loading extension XFree86-DRI [ 306.181] (II) LoadModule: "dri2" [ 306.182] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so [ 306.183] (II) Module dri2: vendor="X.Org Foundation" [ 306.183] compiled for 1.12.3, module version = 1.2.0 [ 306.183] ABI class: X.Org Server Extension, version 6.0 [ 306.183] (II) Loading extension DRI2 [ 306.195] (==) Matched intel as autoconfigured driver 0 [ 306.195] (==) Matched vesa as autoconfigured driver 1 [ 306.195] (==) Assigned the driver to the xf86ConfigLayout [ 306.195] (II) LoadModule: "intel" [ 306.195] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [ 306.212] (II) Module intel: vendor="X.Org Foundation" [ 306.212] compiled for 1.12.3, module version = 2.12.0 [ 306.212] Module class: X.Org Video Driver [ 306.212] ABI class: X.Org Video Driver, version 12.0 [ 306.212] (II) LoadModule: "vesa" [ 306.213] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so [ 306.214] (II) Module vesa: vendor="X.Org Foundation" [ 306.214] compiled for 1.12.3, module version = 2.3.2 [ 306.214] Module class: X.Org Video Driver [ 306.214] ABI class: X.Org Video Driver, version 12.0 [ 306.214] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server (GT1), Ivybridge Server (GT2) [ 306.214] (II) VESA: driver for VESA chipsets: vesa [ 306.214] (WW) Falling back to old probe method for vesa [ 306.215] drmOpenDevice: node name is /dev/drm0 [ 306.215] drmOpenDevice: open result is 10, (OK) [ 306.215] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 306.215] drmOpenDevice: node name is /dev/drm0 [ 306.215] drmOpenDevice: open result is 10, (OK) [ 306.215] drmOpenByBusid: drmOpenMinor returns 10 [ 306.215] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 306.215] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 306.216] (II) Loading sub module "vgahw" [ 306.216] (II) LoadModule: "vgahw" [ 306.218] (II) Loading /usr/X11R6/lib/modules/libvgahw.so [ 306.242] (II) Module vgahw: vendor="X.Org Foundation" [ 306.242] compiled for 1.12.3, module version = 0.1.0 [ 306.242] ABI class: X.Org Video Driver, version 12.0 [ 306.242] (II) Loading sub module "ramdac" [ 306.242] (II) LoadModule: "ramdac" [ 306.242] (II) Module "ramdac" already built-in [ 306.242] drmOpenDevice: node name is /dev/drm0 [ 306.242] drmOpenDevice: open result is 10, (OK) [ 306.242] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 306.242] drmOpenDevice: node name is /dev/drm0 [ 306.242] drmOpenDevice: open result is 10, (OK) [ 306.242] drmOpenByBusid: drmOpenMinor returns 10 [ 306.242] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 306.242] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 306.242] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 306.242] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 306.242] (==) intel(0): RGB weight 888 [ 306.242] (==) intel(0): Default visual is TrueColor [ 306.243] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+) [ 306.243] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)" [ 306.243] (--) intel(0): Linear framebuffer at 0xE0000000 [ 306.243] (--) intel(0): IO registers at addr 0xF0000000 size 4194304 [ 306.243] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB [ 306.243] (II) intel(0): No SDVO device is found in VBT [ 306.257] (II) intel(0): 2 display pipes available. [ 306.257] (II) Loading sub module "ddc" [ 306.257] (II) LoadModule: "ddc" [ 306.257] (II) Module "ddc" already built-in [ 306.257] (II) Loading sub module "i2c" [ 306.257] (II) LoadModule: "i2c" [ 306.257] (II) Module "i2c" already built-in [ 306.257] (II) intel(0): Output VGA has no monitor section [ 306.257] (II) intel(0): Output LVDS has no monitor section [ 306.258] (II) intel(0): I2C bus "LVDSDDC_C" initialized. [ 306.258] (II) intel(0): Attempting to determine panel fixed mode. [ 306.258] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. [ 306.320] (II) intel(0): EDID for output LVDS [ 306.320] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0 [ 306.320] (II) intel(0): Year: 2010 Week: 33 [ 306.320] (II) intel(0): EDID Version: 1.4 [ 306.320] (II) intel(0): Digital Display Input [ 306.320] (II) intel(0): 6 bits per channel [ 306.320] (II) intel(0): Digital interface is undefined [ 306.320] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 306.320] (II) intel(0): Gamma: 2.20 [ 306.320] (II) intel(0): No DPMS capabilities specified [ 306.320] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 306.320] (II) intel(0): First detailed timing is preferred mode [ 306.320] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 306.320] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560 [ 306.320] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 [ 306.320] (II) intel(0): Manufacturer's mask: 0 [ 306.320] (II) intel(0): Supported detailed timing: [ 306.320] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm [ 306.320] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 306.320] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 306.320] (II) intel(0): Supported detailed timing: [ 306.320] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm [ 306.320] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 306.320] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 306.320] (II) intel(0): AUO [ 306.321] (II) intel(0): B140RW02 V1 [ 306.321] (II) intel(0): EDID (in hex): [ 306.321] (II) intel(0): 00ffffffffffff0006af3e2100000000 [ 306.321] (II) intel(0): 21140104901f11780261959c59528f26 [ 306.321] (II) intel(0): 21505400000001010101010101010101 [ 306.321] (II) intel(0): 010101010101f82a409a61840c30402a [ 306.321] (II) intel(0): 330035ae10000018a51c409a61840c30 [ 306.321] (II) intel(0): 402a330035ae10000018000000fe0041 [ 306.321] (II) intel(0): 554f0a202020202020202020000000fe [ 306.321] (II) intel(0): 004231343052573032205631200a00d0 [ 306.321] (II) intel(0): EDID vendor "AUO", prod id 8510 [ 306.321] (II) intel(0): Output HDMI-3 has no monitor section [ 306.321] (II) intel(0): I2C bus "HDMIB" initialized. [ 306.321] (II) intel(0): HDMI-3 output detected [ 306.321] (II) intel(0): Output HDMI-4 has no monitor section [ 306.321] (II) intel(0): I2C bus "HDMIC" initialized. [ 306.321] (II) intel(0): HDMI-4 output detected [ 306.321] (II) intel(0): Output HDMI-5 has no monitor section [ 306.321] (II) intel(0): I2C bus "HDMID" initialized. [ 306.321] (II) intel(0): HDMI-5 output detected [ 306.360] (II) intel(0): EDID for output VGA [ 306.421] (II) intel(0): EDID for output LVDS [ 306.421] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0 [ 306.421] (II) intel(0): Year: 2010 Week: 33 [ 306.421] (II) intel(0): EDID Version: 1.4 [ 306.421] (II) intel(0): Digital Display Input [ 306.421] (II) intel(0): 6 bits per channel [ 306.421] (II) intel(0): Digital interface is undefined [ 306.421] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 306.421] (II) intel(0): Gamma: 2.20 [ 306.421] (II) intel(0): No DPMS capabilities specified [ 306.421] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 306.422] (II) intel(0): First detailed timing is preferred mode [ 306.422] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 306.422] (II) intel(0): Display is continuous-frequency [ 306.422] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560 [ 306.422] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 [ 306.422] (II) intel(0): Manufacturer's mask: 0 [ 306.422] (II) intel(0): Supported detailed timing: [ 306.422] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm [ 306.422] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 306.422] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 306.422] (II) intel(0): Supported detailed timing: [ 306.422] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm [ 306.422] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 306.422] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 306.422] (II) intel(0): AUO [ 306.422] (II) intel(0): B140RW02 V1 [ 306.422] (II) intel(0): EDID (in hex): [ 306.422] (II) intel(0): 00ffffffffffff0006af3e2100000000 [ 306.422] (II) intel(0): 21140104901f11780261959c59528f26 [ 306.422] (II) intel(0): 21505400000001010101010101010101 [ 306.422] (II) intel(0): 010101010101f82a409a61840c30402a [ 306.422] (II) intel(0): 330035ae10000018a51c409a61840c30 [ 306.422] (II) intel(0): 402a330035ae10000018000000fe0041 [ 306.422] (II) intel(0): 554f0a202020202020202020000000fe [ 306.422] (II) intel(0): 004231343052573032205631200a00d0 [ 306.422] (II) intel(0): EDID vendor "AUO", prod id 8510 [ 306.422] (II) intel(0): Printing probed modes for output LVDS [ 306.422] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 306.422] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e) [ 306.422] (II) intel(0): I2C device "HDMIB:ddc2" registered at address 0xA0. [ 306.428] (II) intel(0): EDID for output HDMI-3 [ 306.428] (II) intel(0): EDID for output HDMI-3 [ 306.428] (II) intel(0): I2C device "HDMIC:ddc2" registered at address 0xA0. [ 306.432] (II) intel(0): EDID for output HDMI-4 [ 306.432] (II) intel(0): EDID for output HDMI-4 [ 306.432] (II) intel(0): I2C device "HDMID:ddc2" registered at address 0xA0. [ 306.436] (II) intel(0): EDID for output HDMI-5 [ 306.436] (II) intel(0): EDID for output HDMI-5 [ 306.436] (II) intel(0): Output VGA disconnected [ 306.436] (II) intel(0): Output LVDS connected [ 306.436] (II) intel(0): Output HDMI-3 disconnected [ 306.436] (II) intel(0): Output HDMI-4 disconnected [ 306.436] (II) intel(0): Output HDMI-5 disconnected [ 306.436] (II) intel(0): Using exact sizes for initial modes [ 306.436] (II) intel(0): Output LVDS using initial mode 1600x900 [ 306.436] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 306.436] (II) intel(0): detected 512 kB GTT. [ 306.436] (II) intel(0): detected 65532 kB stolen memory. [ 306.436] (==) intel(0): video overlay key set to 0x101fe [ 306.436] (==) intel(0): DPI set to (96, 96) [ 306.436] (II) Loading sub module "fb" [ 306.436] (II) LoadModule: "fb" [ 306.438] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 306.456] (II) Module fb: vendor="X.Org Foundation" [ 306.456] compiled for 1.12.3, module version = 1.0.0 [ 306.456] ABI class: X.Org ANSI C Emulation, version 0.4 [ 306.457] (II) Loading sub module "int10" [ 306.457] (II) LoadModule: "int10" [ 306.458] (II) Loading /usr/X11R6/lib/modules/libint10.so [ 306.459] (II) Module int10: vendor="X.Org Foundation" [ 306.459] compiled for 1.12.3, module version = 1.0.0 [ 306.459] ABI class: X.Org Video Driver, version 12.0 [ 306.461] (II) intel(0): Bad V_BIOS checksum [ 306.461] (II) intel(0): Primary V_BIOS segment is: 0xc000 [ 306.461] (--) intel(0): Console VGA mode is 0x3 [ 306.462] (II) UnloadModule: "vesa" [ 306.462] (II) Unloading vesa [ 306.462] (==) Depth 24 pixmap format is 32 bpp [ 306.468] (II) intel(0): Kernel reported 1006592 total, 0 used [ 306.468] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available [ 306.468] (WW) intel(0): DRI disabled on Sandy Bridge chipsets [ 306.468] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration disabled. [ 306.468] (**) intel(0): Framebuffer tiled [ 306.468] (**) intel(0): Pixmaps tiled [ 306.468] (**) intel(0): 3D buffers tiled [ 306.468] (**) intel(0): SwapBuffers wait enabled [ 306.474] (==) intel(0): VideoRam: 262144 KB [ 306.474] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled [ 306.494] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03b0 [ 306.507] (II) UXA(0): Driver registered support for the following operations: [ 306.507] (II) solid [ 306.507] (II) copy [ 306.507] (II) composite (RENDER acceleration) [ 306.507] (II) put_image [ 306.507] (II) get_image [ 306.507] (==) intel(0): Backing store disabled [ 306.507] (==) intel(0): Silken mouse disabled [ 306.507] (II) intel(0): Initializing HW Cursor [ 306.770] Plane disable [ 306.810] Pipe disable [ 306.850] PFIT disable [ 306.850] FDI RX disable [ 306.870] FDI TX disable [ 306.890] FDI RX train 1 preload [ 306.910] FDI TX train 1 preload [ 306.930] LVDS port force off [ 306.930] Transcoder disable [ 306.970] PCH DPLL disable [ 306.970] FDI RX PLL PCD disable [ 306.970] FDI TX PLL disable 001a2040 [ 306.990] FDI RX PLL disable 001c0000 [ 307.010] DPMS off done [ 307.030] Plane disable [ 307.030] Pipe disable [ 307.050] PFIT disable [ 307.050] FDI RX disable [ 307.070] FDI TX disable [ 307.090] FDI RX train 1 preload [ 307.110] FDI TX train 1 preload [ 307.130] Transcoder disable [ 307.150] PCH DPLL disable [ 307.150] FDI RX PLL PCD disable [ 307.150] FDI TX PLL disable 00000040 [ 307.170] FDI RX PLL disable 00040000 [ 307.190] DPMS off done [ 307.281] (II) intel(0): Fixed memory allocation layout: [ 307.281] (II) intel(0): 0x03fff000: end of stolen memory [ 307.281] (II) intel(0): 0x03fff000-0x0fffffff: DRI memory manager (196612 kB) [ 307.281] (II) intel(0): 0x10000000: end of aperture [ 307.281] (II) intel(0): BO memory allocation layout: [ 307.281] (II) intel(0): 0x03fff000: start of memory manager [ 307.281] (II) intel(0): 0x04652000-0x0465bfff: HW cursors (40 kB) [ 307.281] (II) intel(0): 0x10000000: end of memory manager [ 307.293] Plane disable [ 307.293] Pipe disable [ 307.310] PFIT disable [ 307.310] FDI RX disable [ 307.330] FDI TX disable [ 307.350] FDI RX train 1 preload [ 307.370] FDI TX train 1 preload [ 307.390] LVDS port force off [ 307.390] Transcoder disable [ 307.410] PCH DPLL disable [ 307.410] FDI RX PLL PCD disable [ 307.410] FDI TX PLL disable 001a2040 [ 307.430] FDI RX PLL disable 001c0000 [ 307.450] DPMS off done [ 307.470] Plane disable [ 307.470] Pipe disable [ 307.490] PFIT disable [ 307.490] FDI RX disable [ 307.510] FDI TX disable [ 307.530] FDI RX train 1 preload [ 307.550] FDI TX train 1 preload [ 307.570] Transcoder disable [ 307.590] PCH DPLL disable [ 307.590] FDI RX PLL PCD disable [ 307.590] FDI TX PLL disable 00000040 [ 307.610] FDI RX PLL disable 00040000 [ 307.630] DPMS off done [ 307.650] Plane disable [ 307.650] Pipe disable [ 307.670] PFIT disable [ 307.670] FDI RX disable [ 307.690] FDI TX disable [ 307.710] FDI RX train 1 preload [ 307.730] FDI TX train 1 preload [ 307.750] LVDS port force off [ 307.750] Transcoder disable [ 307.770] PCH DPLL disable [ 307.770] FDI RX PLL PCD disable [ 307.770] FDI TX PLL disable 001a2040 [ 307.790] FDI RX PLL disable 001c0000 [ 307.810] DPMS off done [ 307.830] (II) intel(0): using SSC reference clock of 120 MHz [ 307.830] bpp 6 [ 307.830] (II) intel(0): Selecting standard 18 bit TMDS pixel format. [ 307.990] PCH FDI RX PLL enable [ 308.030] PCH FDI TX PLL enable 001a2050 [ 308.070] Pipe enable [ 308.090] Plane enable [ 308.150] FDI_RX_IIR 0x700 [ 308.150] FDI train 1 done. [ 308.170] FDI_RX_IIR 0x600 [ 308.170] FDI train 2 done. [ 308.170] FDI train done [ 308.190] FDI TX link normal [ 308.210] transcoder enable [ 308.210] LUT load [ 308.210] DPMS on done [ 308.210] Plane disable [ 308.210] Pipe disable [ 308.230] PFIT disable [ 308.230] FDI RX disable [ 308.250] FDI TX disable [ 308.270] FDI RX train 1 preload [ 308.290] FDI TX train 1 preload [ 308.310] Transcoder disable [ 308.330] PCH DPLL disable [ 308.330] FDI RX PLL PCD disable [ 308.330] FDI TX PLL disable 00000040 [ 308.350] FDI RX PLL disable 00040000 [ 308.370] DPMS off done [ 308.390] (II) intel(0): Output configuration: [ 308.390] (II) intel(0): Pipe A is on [ 308.390] (II) intel(0): Display plane A is now enabled and connected to pipe A. [ 308.390] (II) intel(0): Pipe B is off [ 308.390] (II) intel(0): Display plane B is now disabled and connected to pipe B. [ 308.390] (II) intel(0): Output VGA is connected to pipe none [ 308.390] (II) intel(0): Output LVDS is connected to pipe A [ 308.390] (II) intel(0): Output HDMI-3 is connected to pipe none [ 308.390] (II) intel(0): Output HDMI-4 is connected to pipe none [ 308.390] (II) intel(0): Output HDMI-5 is connected to pipe none [ 308.390] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 308.392] (==) intel(0): DPMS enabled [ 308.392] (==) intel(0): Intel XvMC decoder enabled [ 308.392] (WW) intel(0): Disabling Xv because no adaptors could be initialized. [ 308.392] (II) intel(0): direct rendering: Failed [ 308.392] (--) RandR disabled [ 308.392] (II) Initializing built-in extension Generic Event Extension [ 308.392] (II) Initializing built-in extension SHAPE [ 308.392] (II) Initializing built-in extension MIT-SHM [ 308.392] (II) Initializing built-in extension XInputExtension [ 308.392] (II) Initializing built-in extension XTEST [ 308.392] (II) Initializing built-in extension BIG-REQUESTS [ 308.392] (II) Initializing built-in extension SYNC [ 308.392] (II) Initializing built-in extension XKEYBOARD [ 308.392] (II) Initializing built-in extension XC-MISC [ 308.392] (II) Initializing built-in extension SECURITY [ 308.392] (II) Initializing built-in extension XINERAMA [ 308.392] (II) Initializing built-in extension XFIXES [ 308.392] (II) Initializing built-in extension RENDER [ 308.392] (II) Initializing built-in extension RANDR [ 308.392] (II) Initializing built-in extension COMPOSITE [ 308.392] (II) Initializing built-in extension DAMAGE [ 308.425] (II) AIGLX: Screen 0 is not DRI2 capable [ 308.425] (II) AIGLX: Screen 0 is not DRI capable [ 308.425] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/swrastg_dri.so failed (File not found) [ 308.577] (II) AIGLX: Loaded and initialized swrast [ 308.577] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 308.590] (II) intel(0): Setting screen physical size to 423 x 238 [ 309.130] (II) config/wscons: checking input device /dev/wskbd [ 309.130] (II) wskbd: using layout de [ 309.130] (II) LoadModule: "kbd" [ 309.131] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 309.138] (II) Module kbd: vendor="X.Org Foundation" [ 309.138] compiled for 1.12.3, module version = 1.6.2 [ 309.138] Module class: X.Org XInput Driver [ 309.138] ABI class: X.Org XInput driver, version 16.0 [ 309.138] (II) Using input driver 'kbd' for '/dev/wskbd' [ 309.138] (**) /dev/wskbd: always reports core events [ 309.138] (**) /dev/wskbd: always reports core events [ 309.138] (**) Option "Protocol" "standard" [ 309.138] (**) Option "XkbRules" "base" [ 309.138] (**) Option "XkbModel" "pc105" [ 309.138] (**) Option "XkbLayout" "de" [ 309.138] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 309.692] (II) config/wscons: checking input device /dev/wsmouse0 [ 309.692] (II) LoadModule: "synaptics" [ 309.693] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so [ 309.694] (II) Module synaptics: vendor="X.Org Foundation" [ 309.694] compiled for 1.12.3, module version = 1.6.2 [ 309.694] Module class: X.Org XInput Driver [ 309.694] ABI class: X.Org XInput driver, version 16.0 [ 309.694] (II) Using input driver 'synaptics' for '/dev/wsmouse0' [ 309.694] (**) /dev/wsmouse0: always reports core events [ 309.695] (**) Option "Device" "/dev/wsmouse0" [ 310.727] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5888 resolution 75 [ 310.727] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4820 resolution 105 [ 310.727] (**) /dev/wsmouse0: always reports core events [ 310.775] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7) [ 310.776] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5 [ 310.776] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75 [ 310.776] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.036 [ 310.776] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1 [ 310.776] (**) /dev/wsmouse0: (accel) acceleration profile 1 [ 310.776] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000 [ 310.776] (**) /dev/wsmouse0: (accel) acceleration threshold: 4 [ 311.245] (II) config/wscons: checking input device /dev/wsmouse [ 311.245] (II) LoadModule: "ws" [ 311.246] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 311.247] (II) Module ws: vendor="X.Org Foundation" [ 311.247] compiled for 1.12.3, module version = 1.3.0 [ 311.247] Module class: X.Org XInput Driver [ 311.247] ABI class: X.Org XInput driver, version 16.0 [ 311.247] (II) Using input driver 'ws' for '/dev/wsmouse' [ 311.247] (**) /dev/wsmouse: always reports core events [ 311.247] (II) ws: /dev/wsmouse: debuglevel 0 [ 311.247] (**) Option "Device" "/dev/wsmouse" [ 311.247] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 311.247] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 311.247] (**) ws: /dev/wsmouse: associated screen: 0 [ 311.247] (II) ws: /dev/wsmouse: minimum x position: 0 [ 311.247] (II) ws: /dev/wsmouse: maximum x position: 1599 [ 311.247] (II) ws: /dev/wsmouse: minimum y position: 0 [ 311.247] (II) ws: /dev/wsmouse: maximum y position: 899 [ 311.248] (==) ws: /dev/wsmouse: Buttons: 7 [ 311.248] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 311.248] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8) [ 311.248] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 311.248] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 311.248] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 311.248] (**) /dev/wsmouse: (accel) acceleration threshold: 4 [ 311.249] PCH FDI RX PLL enable [ 311.280] PCH FDI TX PLL enable 801a2350 [ 311.320] Pipe enable [ 311.320] Plane enable [ 311.360] FDI_RX_IIR 0x100 [ 311.360] FDI train 1 done. [ 311.380] FDI_RX_IIR 0x200 [ 311.380] FDI train 2 done. [ 311.380] FDI train done [ 311.400] FDI TX link normal [ 311.420] transcoder enable [ 311.420] LUT load [ 311.420] DPMS on done [ 848.212] (II) intel(0): EDID vendor "AUO", prod id 8510 [ 848.212] (II) intel(0): Printing DDC gathered Modelines: [ 848.212] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 848.212] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e) [ 848.212] (II) intel(0): EDID vendor "AUO", prod id 8510 [ 864.387] (II) UnloadModule: "kbd" [ 864.387] (II) UnloadModule: "synaptics" [ 864.431] (II) UnloadModule: "ws" [ 864.460] PCH FDI RX PLL enable [ 864.500] PCH FDI TX PLL enable 801a2350 [ 864.540] Pipe enable [ 864.540] Plane enable [ 864.580] FDI_RX_IIR 0x100 [ 864.580] FDI train 1 done. [ 864.600] FDI_RX_IIR 0x200 [ 864.600] FDI train 2 done. [ 864.600] FDI train done [ 864.620] FDI TX link normal [ 864.640] transcoder enable [ 864.640] LUT load [ 864.640] DPMS on done [ 864.816] Server terminated successfully (0). Closing log file. must i take also an .xinitrc to get the right resolution 1920x1200 if yes how should it has to look? ps: i used in archlinux the same setup with displayport connection it works at default only the resolution would be the same as my ThinkPad 1600x900 and i used this .xinitrc and than my NEC takes 1920x1200 Code:
#!/bin/sh # # ~/.xinitrc # # Executed by startx (run your window manager from here) #virtual desktop: #xrandr --output LVDS1 --auto --output DP2 --auto --right-of LVDS1 #when not docked: #xrandr --output LVDS1 --auto --output DP2 --off #docked with NEC: xrandr --output DP2 --auto --output LVDS1 --off #when not docked: #xrandr --output LVDS1 --auto --DP2 --off if [ -d /etc/X11/xinit/xinitrc.d ]; then for f in /etc/X11/xinit/xinitrc.d/*; do [ -x "$f" ] && . "$f" done unset f fi # exec gnome-session # exec startkde # exec startxfce4 # ...or the Window Manager of your choice xcompmgr -c & exec openbox-session |
|
|||
so i found on research that Displayport connections won't work with OpenBSD
i found it here //marc.info/?l=openbsd-misc&m=136314377101542&w=2 so i connect my external NEC PA241W with DVI could someone help me how to setup my .xinitrc to have this constellations? If the external monitor is connected AND the laptop lid open -> both displays extended If the external monitor is connected AND laptop closed -> only external If the external monitor is not connected -> laptop monitor. this is my xrandr with connected external Monitor Code:
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 4096 x 4096 VGA disconnected (normal left inverted right x axis y axis) LVDS connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm 1600x900 60.0*+ 40.0 HDMI-3 disconnected (normal left inverted right x axis y axis) HDMI-4 disconnected (normal left inverted right x axis y axis) HDMI-5 connected 1440x900+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 59.9 1400x1050 59.9 1280x1024 75.0 60.0 1440x900 59.9* 1366x768 59.8 1152x864 75.0 1280x720 60.0 1024x768 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 its connect per DVI Last edited by kerasi; 18th March 2013 at 07:59 AM. |
|
|||
Help may be at hand
About ten days ago I donated an HP monitor to answer this request:
"To help with work on updating our intel graphics support I'm after a 16:10 LCD with DVI/HDMI/DisplayPort inputs such as the HP ZR2440w to replace my old 4:3 one which only has DVI. While we don't currently support any form of DisplayPort it becomes more of an issue as time goes by as laptop panels are moving away from being connected via LVDS to embedded DisplayPort (eDP). " After a few days I saw this note in a personal message from the developer: "Thanks, the monitor arrived today and already it has proved useful in fixing a critical problem in the displayport code." That should give you some hope but magic takes work and testing so don't necessarily expect instant relief. I don't have any displayport devices here so I cannot tell you any more but the fact that help is on its way for people who do is why I donate when I can. More people should... |
|
|||
Thank you, Loki for sharing. Too many tend to ignore the fact that development & progress takes resources. Reminding everyone that progress only comes from putting skin into the game is something worth repeating.
Thank you, again. |
|
|||
As of this morning the VCONs are working and all I have to suss out is how to change the fonts to suit my eyes and I'll be happy.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
openvpn on openbsd problem.... | michaelk | OpenBSD Security | 8 | 9th February 2011 04:49 AM |
openbsd postfix pine problem | werwer | OpenBSD Packages and Ports | 4 | 29th May 2010 10:08 PM |
Start problem after the installation of OpenBSD 4.6 | aleunix | OpenBSD Installation and Upgrading | 12 | 21st December 2009 06:59 PM |
Internet Access Problem OpenBSD 4.3 | alcy | OpenBSD General | 3 | 19th September 2008 06:00 PM |
Problem with php and apache on OpenBSD | co_bofh | OpenBSD General | 10 | 27th July 2008 10:13 PM |