|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Dell Latitude D630 running 5.3-stable amd64
Using fvwm Wireless works well after loading firmware by using a wired ethernet connection. dmesg: Quote:
Quote:
|
|
||||
I use blackbox and get Pitkon themes from DeviantArt. I can't figure out how you can theme fvwm?
not that the default isn't excellent on it's own. I like the default for switching screens, and the pager is nice, I can change the border of apps, and set the background with bgsetbg. In blackbox I use the skins from Pitkon's older work, the backgrounds from his newest work, and throw out anything in between that relies on windows. http://pitkon.deviantart.com/ Last edited by vanGrimoire; 10th June 2013 at 12:50 AM. |
|
|||
I have a laptop i3 ASUS k54L with OpenBSD 5.3 GENERIC
dmesg Quote:
I have a problem with acpi and USB3 no work boot> -c disable acpi quit and continue boot Last edited by kimotori; 28th June 2013 at 12:51 PM. |
|
|||
Welcome!
Can you provide more information? Without more information, we can only empathize. Posting the output of dmesg(8) would be helpful. You may also want to download & install a recent snapshot of -current as -current has had four additional months of development over what can be found in 5.3-release. If you do not understand the difference between -release & -current, see Section 5.1 of the project's official FAQ. Last edited by ocicat; 27th June 2013 at 10:13 AM. |
|
|||
Tnx!
And sorry for the delay is there a way to automate the "disable acpi" in order not to repeat the procedure? Right from the 5.1, 5.2, 5.3 I have the same problem. i hope 5.4 |
|
|||
Ooooohhh tnx
Quote:
|
|
|||
Macbook 2,1 core2duo with 5.3 amd64
Added an Asus N13 wireless adapter The GMA 950 graphics card has some errors (check bottom of dmesg) that keep machdep.lidsuspend and xlock from working, but everything else is ok. Does anyone have suggestions for how to fix the graphics card issues? Quote:
|
|
|||
HP Elitebook 8460p
- Hard Disk was pulled from my main machine, a Lenovo X200 - No changes were made to the config - Video detected, sound works, 1080p video plays through VLC, brightness / volume keys work - Could not properly resume from suspend. Lost the keyboard (everything else still works including WiFi). Did not attempt SSH troubleshooting. Quote:
Last edited by joekiser; 23rd November 2013 at 03:20 AM. |
|
|||
Same HDD back in my X200:
Quote:
|
|
|||
What's different? I swapped a new motherboard into my X200. This is from an X201, a Core i5.
I immediately noticed a more responsive system, and I can now run 1080 videos fullscreen with no stutter. Not sure if it is the improved GPU or the AES-NI instruction set. Quote:
|
|
||||
Dell Latitude CPi A366XT
I'm setting up OpenBSD-5.4 on an old Dell laptop this evening (dmesg). It will probably end up as a Heimdal (Kerberos V) server. (Just because I want to tinker with the tech; it's not really needed). All of the hardware seems to work with OpenBSD except the cardbus 3Com 3CCFE575BT continuously reports:
Code:
xl0: watchdog timeout |
|
|||
Asus K53 i5 8G
This is my Asus K53 I picked up just to learn UNIX like OS's.
Code:
OpenBSD 5.4-stable (GENERIC.MP) #0: Tue Jan 28 05:21:02 CST 2014 root@srenfro@myhome.local:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8339701760 (7953MB) avail mem = 8109973504 (7734MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb940 (79 entries) bios0: vendor American Megatrends Inc. version "K53E.221" date 08/10/2012 bios0: ASUSTeK Computer Inc. K53E acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC DBGP ECDT SLIC HPET MCFG SSDT SSDT ASF! acpi0: wakeup devices PEG0(S4) PEG1(S4) PEG2(S4) PEG3(S4) B0D4(S4) P0P1(S4) HDEF(S4) GLAN(S4) EHC1(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC2(S3) USB5(S3) USB6(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.68 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 99MHz cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.34 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.34 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.34 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiec0 at acpi0 acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (PEG3) acpiprt5 at acpi0: bus -1 (P0P1) acpiprt6 at acpi0: bus 1 (RP01) acpiprt7 at acpi0: bus 2 (RP02) acpiprt8 at acpi0: bus -1 (RP03) acpiprt9 at acpi0: bus 3 (RP04) acpiprt10 at acpi0: bus -1 (RP05) acpiprt11 at acpi0: bus 4 (RP06) acpiprt12 at acpi0: bus -1 (RP07) acpiprt13 at acpi0: bus -1 (RP08) acpicpu0 at acpi0: C1, PSS acpicpu1 at acpi0: C1, PSS acpicpu2 at acpi0: C1, PSS acpicpu3 at acpi0: C1, PSS acpitz0 at acpi0: critical temperature is 103 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "K53--27" serial type LIon oem "ASUSTek" acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivideo1 at acpi0: GFX0 acpivout0 at acpivideo1: LCDD cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2501, 2500, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1366x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: msi pci2 at ppb1 bus 2 "Atheros AR9485" rev 0x01 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb5: msi pci3 at ppb2 bus 3 "ASMedia ASM1042 xHCI" rev 0x00 at pci3 dev 0 function 0 not configured ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb5: msi pci4 at ppb3 bus 4 alc0 at pci4 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi, address 10:bf:48:14:ef:4a atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 0 ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x05 ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54755, JE3O> SCSI3 0/direct fixed naa.5000cca640e4b512 sd0: 476940MB, 512 bytes/sector, 976773168 sectors cd0 at scsibus0 targ 2 lun 0: <Slimtype, DVD A DS8A8SH, KAA2> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.5 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 2 configuration 1 interface 0 "Azurewave USB 2.0 UVC VGA WebCam" rev 2.00/11.30 addr 3 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (f0caba7e91fb0255.a) swap on sd0b dump on sd0b Last edited by J65nko; 30th January 2014 at 07:48 PM. |
|
|||
Done
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump |
|
|||
Gateway 7805u FX
Intel Core 2 Duo Processor P8400 (2.26GHz, 3MB L2, 1066MHz FSB) 17″ WXGA+ Glossy LCD display at 1440×900 (Reviewed with a 1920×1200 WUXGA Panel) Intel 5100AGN Wireless 4GB PC3-8500 DDR3 SDRAM (2GB x 2) 698.8GB Western Digital Scorpio Black hard disk drive (7200RPM) DVD SuperMulti (+/-R double layer) drive with Labelflash Setting up wifi was a breeze. Thanks to the man pages Code:
OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4271595520 (4073MB) avail mem = 4150161408 (3957MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries) bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008 bios0: Gateway P-7805u acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 3591.22 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 265MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1197.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEGP) acpiprt2 at acpi0: bus 13 (P0P1) acpiprt3 at acpi0: bus 2 (RP01) acpiprt4 at acpi0: bus 3 (RP02) acpiprt5 at acpi0: bus 4 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus 5 (RP05) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 100 degC acpitz1 at acpi0: critical temperature is 110 degC acpibat0 at acpi0: BAT0 model "SAPPAEET" serial 211 type LION oem "414e41502d504d53" acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: SLPB acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: GFX0 cpu0: Enhanced SpeedStep 3591 MHz: speeds: 2267, 2266, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 2 mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16 msk0 at mskc0 port A: address 00:1d:72:ed:56:80 eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi pci4 at ppb3 bus 4 iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36 ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi pci5 at ppb4 bus 5 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci6 at ppb5 bus 13 "O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22 sdmmc0 at sdhc0 "O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf sd0: 715404MB, 512 bytes/sector, 1465149168 sectors sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637 sd1: 715404MB, 512 bytes/sector, 1465149168 sectors cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.3 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware syncing disks... OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4271595520 (4073MB) avail mem = 4150161408 (3957MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries) bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008 bios0: Gateway P-7805u acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1197.18 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 319MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1436.41 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEGP) acpiprt2 at acpi0: bus 13 (P0P1) acpiprt3 at acpi0: bus 2 (RP01) acpiprt4 at acpi0: bus 3 (RP02) acpiprt5 at acpi0: bus 4 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus 5 (RP05) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 100 degC acpitz1 at acpi0: critical temperature is 110 degC acpibat0 at acpi0: BAT0 model "SAPPAEET" serial 211 type LION oem "414e41502d504d53" acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: SLPB acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: GFX0 cpu0: Enhanced SpeedStep 1197 MHz: speeds: 2267, 2266, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 2 mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16 msk0 at mskc0 port A: address 00:1d:72:ed:56:80 eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi pci4 at ppb3 bus 4 iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36 ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi pci5 at ppb4 bus 5 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci6 at ppb5 bus 13 "O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22 sdmmc0 at sdhc0 "O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf sd0: 715404MB, 512 bytes/sector, 1465149168 sectors sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637 sd1: 715404MB, 512 bytes/sector, 1465149168 sectors cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.3 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware syncing disks... OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4271595520 (4073MB) avail mem = 4150161408 (3957MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries) bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008 bios0: Gateway P-7805u acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 3591.21 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1197.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEGP) acpiprt2 at acpi0: bus 13 (P0P1) acpiprt3 at acpi0: bus 2 (RP01) acpiprt4 at acpi0: bus 3 (RP02) acpiprt5 at acpi0: bus 4 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus 5 (RP05) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 100 degC acpitz1 at acpi0: critical temperature is 110 degC acpibat0 at acpi0: BAT0 model "SAPPAEET" serial 211 type LION oem "414e41502d504d53" acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: SLPB acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: GFX0 cpu0: Enhanced SpeedStep 3591 MHz: speeds: 2267, 2266, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 2 mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16 msk0 at mskc0 port A: address 00:1d:72:ed:56:80 eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi pci4 at ppb3 bus 4 iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36 ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi pci5 at ppb4 bus 5 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci6 at ppb5 bus 13 "O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22 sdmmc0 at sdhc0 "O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf sd0: 715404MB, 512 bytes/sector, 1465149168 sectors sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637 sd1: 715404MB, 512 bytes/sector, 1465149168 sectors cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.3 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware iwn0: error, 2, could not read firmware iwn-5000 iwn0: could not read firmware syncing disks... OpenBSD 5.4-stable (GENERIC) #0: Mon Feb 3 16:52:47 EST 2014 freethinker@Lightwave.hsd1.md.comcast.net.:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 4271595520 (4073MB) avail mem = 4150194176 (3957MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries) bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008 bios0: Gateway P-7805u acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 3591.19 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 265MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEGP) acpiprt2 at acpi0: bus 13 (P0P1) acpiprt3 at acpi0: bus 2 (RP01) acpiprt4 at acpi0: bus 3 (RP02) acpiprt5 at acpi0: bus 4 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus 5 (RP05) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 100 degC acpitz1 at acpi0: critical temperature is 110 degC acpibat0 at acpi0: BAT0 model "SAPPAEET" serial 211 type LION oem "414e41502d504d53" acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: SLPB acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: GFX0 cpu0: Enhanced SpeedStep 3591 MHz: speeds: 2267, 2266, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 2 mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16 msk0 at mskc0 port A: address 00:1d:72:ed:56:80 eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi pci4 at ppb3 bus 4 iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36 ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi pci5 at ppb4 bus 5 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci6 at ppb5 bus 13 "O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22 sdmmc0 at sdhc0 "O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf sd0: 715404MB, 512 bytes/sector, 1465149168 sectors sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637 sd1: 715404MB, 512 bytes/sector, 1465149168 sectors cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.3 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b Last edited by chessmaster; 4th February 2014 at 03:26 AM. |
|
|||
Thinkpad T530, 15" 1080 screen. nVidia graphics disabled in BIOS, running Intel graphics only.
Code:
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8255631360 (7873MB) avail mem = 8027254784 (7655MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (71 entries) bios0: vendor LENOVO version "G4ET62WW (2.04 )" date 09/13/2012 bios0: LENOVO 2359CTO acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.83 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.33 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.33 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.33 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus 4 (EXP3) acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpicpu2 at acpi0: C2, C1, PSS acpicpu3 at acpi0: C2, C1, PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 acpitz0 at acpi0: critical temperature is 103 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "45N1001" serial 7637 type LION oem "SANYO" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2501, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1920x1080 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address 3c:97:0e:15:5c:ff ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci1 at ppb0 bus 2 sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16 sdmmc0 at sdhc0 "Ricoh 5U832 Firewire" rev 0x04 at pci1 dev 0 function 3 not configured ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 3 iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2200" rev 0xc4: msi, MIMO 2T2R, BGN, address 9c:4e:36:3c:3f:04 ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 4 ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> SCSI3 0/direct fixed naa.50014ee6ad9174af sd0: 715404MB, 512 bytes/sector, 1465149168 sectors cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7740H, 1.S0> ATAPI 5/cdrom removable sd1 at scsibus0 targ 2 lun 0: <ATA, TOSHIBA THNSNB03, AJTA> SCSI3 0/direct fixed t10.ATA_TOSHIBA_THNSNB030GMCJ_11OS101XTL2Z sd1: 28626MB, 512 bytes/sector, 58626288 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 sdmmc0: can't enable card uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 ugen0 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 3 ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4 uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.18 addr 5 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd2: 707204MB, 512 bytes/sector, 1448355612 sectors root on sd2a (0943ef3730153be9.a) swap on sd2b dump on sd2b ugen1 detached ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4 ugen1 detached ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4 |
|
|||
Acer E1 531G B9604G50Mnks
Code:
OpenBSD 5.5-current (GENERIC.MP) #12: Fri Mar 21 10:52:57 MDT 2014 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4163629056 (3970MB) avail mem = 4044062720 (3856MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6df0 (38 entries) bios0: vendor Acer version "V2.21" date 12/16/2013 bios0: Acer Aspire E1-531G acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT SSDT SSDT SSDT acpi0: wakeup devices P0P1(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.02 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 2 (RP01) acpiprt3 at acpi0: bus 3 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus 1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) acpiec0 at acpi0 acpicpu0 at acpi0: C1, PSS acpicpu1 at acpi0: C1, PSS acpibat0 at acpi0: BAT1 model "Li_Ion_4000mA " serial 684 type Lion oem "SONY " acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD02 cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi pci1 at ppb0 bus 1 vendor "NVIDIA", unknown product 0x1140 (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 drm: failed to retrieve link info, disabling eDP inteldrm0: 1366x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM57785" rev 0x10, BCM57765 B0 (0x57785100): msi, address b8:88:e3:d3:08:70 brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 4 sdhc0 at pci2 dev 0 function 1 "Broadcom SD Host Controller" rev 0x10: apic 0 int 17 sdhc0 at 0x10: can't map registers vendor "Broadcom", unknown product 0x16be (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 2 not configured vendor "Broadcom", unknown product 0x16bf (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 3 not configured ppb2 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 3 "Atheros AR9485" rev 0x01 at pci3 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500325AS, 0001> SCSI3 0/direct fixed naa.5000c5005c9384dd sd0: 476940MB, 512 bytes/sector, 976773168 sectors cd0 at scsibus0 targ 2 lun 0: <PIONEER, DVD-RW DVRTD11RS, 1.01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Elantech Touchpad, version 3, firmware 0x450f01 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 3 configuration 1 interface 0 "SunplusIT INC. HD WebCam" rev 2.00/44.02 addr 3 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 1 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev 1.10/1.10 addr 3 uhidev0: iclass 3/1 ums0 at uhidev0: 5 buttons, Z dir wsmouse1 at ums0 mux 0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (aa2274dc7090884c.a) swap on sd0b dump on sd0b syncing disks... done OpenBSD 5.5-current (GENERIC.MP) #12: Fri Mar 21 10:52:57 MDT 2014 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4163629056 (3970MB) avail mem = 4044062720 (3856MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6df0 (38 entries) bios0: vendor Acer version "V2.21" date 12/16/2013 bios0: Acer Aspire E1-531G acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT SSDT SSDT SSDT acpi0: wakeup devices P0P1(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.39 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.01 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 2 (RP01) acpiprt3 at acpi0: bus 3 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus 1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpibat0 at acpi0: BAT1 model "Li_Ion_4000mA " serial 684 type Lion oem "SONY " acpiac0 at acpi0: AC unit offline acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD02 cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi pci1 at ppb0 bus 1 vendor "NVIDIA", unknown product 0x1140 (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 drm: failed to retrieve link info, disabling eDP inteldrm0: 1366x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM57785" rev 0x10, BCM57765 B0 (0x57785100): msi, address b8:88:e3:d3:08:70 brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 4 sdhc0 at pci2 dev 0 function 1 "Broadcom SD Host Controller" rev 0x10: apic 0 int 17 sdhc0 at 0x10: can't map registers vendor "Broadcom", unknown product 0x16be (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 2 not configured vendor "Broadcom", unknown product 0x16bf (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 3 not configured ppb2 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 3 "Atheros AR9485" rev 0x01 at pci3 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500325AS, 0001> SCSI3 0/direct fixed naa.5000c5005c9384dd sd0: 476940MB, 512 bytes/sector, 976773168 sectors cd0 at scsibus0 targ 2 lun 0: <PIONEER, DVD-RW DVRTD11RS, 1.01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Elantech Touchpad, version 3, firmware 0x450f01 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 3 configuration 1 interface 0 "SunplusIT INC. HD WebCam" rev 2.00/44.02 addr 3 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 1 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev 1.10/1.10 addr 3 uhidev0: iclass 3/1 ums0 at uhidev0: 5 buttons, Z dir wsmouse1 at ums0 mux 0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (aa2274dc7090884c.a) swap on sd0b dump on sd0b Code:
BIOS_Acer_2.17_A_A MD5: C881753211EC34D542A061FFACC0B732 SHA1: 4070D2168FC0A24B81EB76126D01E15789CE1D89 SHA256: 2AFB9061D49065EE744F5725BAEF15F963E6E3C803B279A2BDB33C0437B8904D SHA-512: BCECB664C04F7CE298D6B11EFFB5A98C2CEE840AF8B308DAD09E46E41D28270065AB4EDEE8F69FFED4EBE885255CABBD10D4447B51D5E6BC93B3BFE24FF3AA3A Whirpool: 35590D3B770338C1F7F025169D176AAD41078B3995DDA7AE079B8B86A6F856EDE38E14184512B7BDF916400DDDFA851F39763C374130111B67CBE5D7D40C09AF ** BIOS_Acer_2.21_A_A MD5: 9A7FBF95058EACD31E2465985917B225 SHA1: 519658E524734080CB50A952349FFBBD27C3C774 SHA256: 26E4733AE6623497F47EEBB61C70854417F69E03E5F6BEE8F84EA582C0786C26 SHA512: 79486D30D699FD17B1B1B8657A5AE9A7CA1BB76259F5DE20FA67F3270555543F364FF158F4AB7545BAFCF9F2AD1DD54AEDAB70ADE8554C4DD56F782A46BA687F Whirpool: 44F4B562DCB3CEAE7F76C0E8ADAC3A2E5619EA2999C3578A0AFB832008D0D70D463E05F26540DBAE4D6CCFF26E5BEA981B1396B0D02453C6374CC651B76B6114 |
|
|||
My one is an Acer Aspire One 772. The down side is it has a BCM4313 chip which means I had to get a N-300 USB adapter with an RTL8192CU chip. On the bright side, the Radeon Graphics performance is quiet good. This is the first time have a BSD installation that is utilizing KMS. What surprised me the most was the ability to suspend and resume very smoothly and also faster then my Linux and Windows installations on the same machine. Something I never expected with any BSD on a laptop made in 2012.
Code:
OpenBSD 5.6-current (GENERIC.MP) #372: Wed Sep 10 18:03:54 MDT 2014 todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> real mem = 3987992576 (3803MB) avail mem = 3873099776 (3693MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries) bios0: vendor Acer version "V1.04" date 06/08/2011 bios0: Acer AO722 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT acpi0: wakeup devices SPB2(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD C-50 Processor, 998.34 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD C-50 Processor, 997.51 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PB2_) acpiprt2 at acpi0: bus -1 (PB3_) acpiprt3 at acpi0: bus -1 (PB4_) acpiprt4 at acpi0: bus -1 (PB5_) acpiprt5 at acpi0: bus -1 (PB6_) acpiprt6 at acpi0: bus -1 (PB7_) acpiprt7 at acpi0: bus 2 (SPB0) acpiprt8 at acpi0: bus -1 (SPB1) acpiprt9 at acpi0: bus 6 (SPB2) acpiprt10 at acpi0: bus 7 (SPB3) acpiprt11 at acpi0: bus 1 (P2P_) acpiec0 at acpi0 acpicpu0 at acpi0: C2, PSS acpicpu1 at acpi0: C2, PSS acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT1 model "13848633228217409" serial b5d6 type Lion oem "Sanyo " acpiac0 at acpi0: AC unit online acpibtn2 at acpi0: LID_ acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ acpivideo2 at acpi0: VGA_ cpu0: 998 MHz: speeds: 1000 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00 drm0 at radeondrm0 radeondrm0: msi azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi azalia0: no supported codecs ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374 sd0: 305245MB, 512 bytes/sector, 625142448 sectors ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling iic0 at piixpm0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16 azalia1: codecs: Conexant/0x506c audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci1 at ppb0 bus 1 ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00 pci3 at ppb2 bus 6 alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5 ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00 pci4 at ppb3 bus 7 "Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Elantech Touchpad, version 2, firmware 0x40213 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uvideo0 at uhub1 port 1 configuration 1 interface 0 "Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2 video0 at uvideo0 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 16 buttons, Z dir wsmouse1 at ums0 mux 0 uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev1: iclass 3/0, 17 report ids uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (4752f806cf2cc091.a) swap on sd0b dump on sd0b drm: initializing kernel modesetting (PALM 0x1002:0x9804 0x1025:0x0598). radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF drm: PCIE GART of 512M enabled (table at 0x0000000000040000). drm: Internal thermal controller without fan control radeondrm0: 1366x768 wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) urtwn0 at uhub0 port 1 "D-Link DWA-131 rev B" rev 2.00/2.00 addr 2 urtwn0: could not set configuration no urtwn0 detached urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2 urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67 syncing disks... OpenBSD 5.6-current (RAMDISK_CD) #351: Wed Sep 17 12:10:28 MDT 2014 todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD RTC BIOS diagnostic error 80<clock_battery> real mem = 3987992576 (3803MB) avail mem = 3876450304 (3696MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries) bios0: vendor Acer version "V1.04" date 06/08/2011 bios0: Acer AO722 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD C-50 Processor, 998.33 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PB2_) acpiprt2 at acpi0: bus -1 (PB3_) acpiprt3 at acpi0: bus -1 (PB4_) acpiprt4 at acpi0: bus -1 (PB5_) acpiprt5 at acpi0: bus -1 (PB6_) acpiprt6 at acpi0: bus -1 (PB7_) acpiprt7 at acpi0: bus 2 (SPB0) acpiprt8 at acpi0: bus -1 (SPB1) acpiprt9 at acpi0: bus 6 (SPB2) acpiprt10 at acpi0: bus 7 (SPB3) acpiprt11 at acpi0: bus 1 (P2P_) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 vga1 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "ATI Radeon HD 6310 HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374 sd0: 305245MB, 512 bytes/sector, 625142448 sectors ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured "ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci1 at ppb0 bus 1 ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00 pci3 at ppb2 bus 6 alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5 ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00 pci4 at ppb3 bus 7 "Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 urtwn0 at uhub0 port 1 "vendor 0x2001 802.11n WLAN Adapter" rev 2.00/2.00 addr 2 OpenBSD 5.6-current (RAMDISK_CD) #351: Wed Sep 17 12:10:28 MDT 2014 todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD RTC BIOS diagnostic error 80<clock_battery> real mem = 3987992576 (3803MB) avail mem = 3876450304 (3696MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries) bios0: vendor Acer version "V1.04" date 06/08/2011 bios0: Acer AO722 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD C-50 Processor, 998.17 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PB2_) acpiprt2 at acpi0: bus -1 (PB3_) acpiprt3 at acpi0: bus -1 (PB4_) acpiprt4 at acpi0: bus -1 (PB5_) acpiprt5 at acpi0: bus -1 (PB6_) acpiprt6 at acpi0: bus -1 (PB7_) acpiprt7 at acpi0: bus 2 (SPB0) acpiprt8 at acpi0: bus -1 (SPB1) acpiprt9 at acpi0: bus 6 (SPB2) acpiprt10 at acpi0: bus 7 (SPB3) acpiprt11 at acpi0: bus 1 (P2P_) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 vga1 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "ATI Radeon HD 6310 HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374 sd0: 305245MB, 512 bytes/sector, 625142448 sectors ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured "ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci1 at ppb0 bus 1 ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00 pci3 at ppb2 bus 6 alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5 ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00 pci4 at ppb3 bus 7 "Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 urtwn0 at uhub0 port 1 "vendor 0x2001 product 0x330d" rev 2.00/2.00 addr 2 OpenBSD 5.6-current (GENERIC.MP) #372: Wed Sep 10 18:03:54 MDT 2014 todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> real mem = 3987992576 (3803MB) avail mem = 3873099776 (3693MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries) bios0: vendor Acer version "V1.04" date 06/08/2011 bios0: Acer AO722 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT acpi0: wakeup devices SPB2(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD C-50 Processor, 998.32 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD C-50 Processor, 997.51 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PB2_) acpiprt2 at acpi0: bus -1 (PB3_) acpiprt3 at acpi0: bus -1 (PB4_) acpiprt4 at acpi0: bus -1 (PB5_) acpiprt5 at acpi0: bus -1 (PB6_) acpiprt6 at acpi0: bus -1 (PB7_) acpiprt7 at acpi0: bus 2 (SPB0) acpiprt8 at acpi0: bus -1 (SPB1) acpiprt9 at acpi0: bus 6 (SPB2) acpiprt10 at acpi0: bus 7 (SPB3) acpiprt11 at acpi0: bus 1 (P2P_) acpiec0 at acpi0 acpicpu0 at acpi0: C2, PSS acpicpu1 at acpi0: C2, PSS acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT1 model "13848633228217409" serial b5d6 type Lion oem "Sanyo " acpiac0 at acpi0: AC unit online acpibtn2 at acpi0: LID_ acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ acpivideo2 at acpi0: VGA_ cpu0: 998 MHz: speeds: 1000 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00 drm0 at radeondrm0 radeondrm0: msi azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi azalia0: no supported codecs ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374 sd0: 305245MB, 512 bytes/sector, 625142448 sectors ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling iic0 at piixpm0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16 azalia1: codecs: Conexant/0x506c audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci1 at ppb0 bus 1 ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00 pci3 at ppb2 bus 6 alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5 ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00 pci4 at ppb3 bus 7 "Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Elantech Touchpad, version 2, firmware 0x40213 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2 urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67 uvideo0 at uhub1 port 1 configuration 1 interface 0 "Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2 video0 at uvideo0 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 16 buttons, Z dir wsmouse1 at ums0 mux 0 uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev1: iclass 3/0, 17 report ids uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (4752f806cf2cc091.a) swap on sd0b dump on sd0b drm: initializing kernel modesetting (PALM 0x1002:0x9804 0x1025:0x0598). radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF drm: PCIE GART of 512M enabled (table at 0x0000000000040000). drm: Internal thermal controller without fan control radeondrm0: 1366x768 wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) syncing disks... OpenBSD 5.6-current (RAMDISK_CD) #351: Wed Sep 17 12:10:28 MDT 2014 todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD RTC BIOS diagnostic error 80<clock_battery> real mem = 3987992576 (3803MB) avail mem = 3876450304 (3696MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries) bios0: vendor Acer version "V1.04" date 06/08/2011 bios0: Acer AO722 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD C-50 Processor, 997.67 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PB2_) acpiprt2 at acpi0: bus -1 (PB3_) acpiprt3 at acpi0: bus -1 (PB4_) acpiprt4 at acpi0: bus -1 (PB5_) acpiprt5 at acpi0: bus -1 (PB6_) acpiprt6 at acpi0: bus -1 (PB7_) acpiprt7 at acpi0: bus 2 (SPB0) acpiprt8 at acpi0: bus -1 (SPB1) acpiprt9 at acpi0: bus 6 (SPB2) acpiprt10 at acpi0: bus 7 (SPB3) acpiprt11 at acpi0: bus 1 (P2P_) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 vga1 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "ATI Radeon HD 6310 HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374 sd0: 305245MB, 512 bytes/sector, 625142448 sectors ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured "ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci1 at ppb0 bus 1 ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00 pci3 at ppb2 bus 6 alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5 ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00 pci4 at ppb3 bus 7 "Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 "Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2 at uhub1 port 1 not configured uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev1: iclass 3/0, 17 report ids uhid at uhidev1 reportid 3 not configured uhid at uhidev1 reportid 16 not configured uhid at uhidev1 reportid 17 not configured softraid0 at root scsibus1 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2 urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67 syncing disks... done OpenBSD 5.6-current (GENERIC.MP) #383: Wed Sep 17 12:05:19 MDT 2014 todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> real mem = 3987992576 (3803MB) avail mem = 3873099776 (3693MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries) bios0: vendor Acer version "V1.04" date 06/08/2011 bios0: Acer AO722 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT acpi0: wakeup devices SPB2(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD C-50 Processor, 998.34 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD C-50 Processor, 997.50 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PB2_) acpiprt2 at acpi0: bus -1 (PB3_) acpiprt3 at acpi0: bus -1 (PB4_) acpiprt4 at acpi0: bus -1 (PB5_) acpiprt5 at acpi0: bus -1 (PB6_) acpiprt6 at acpi0: bus -1 (PB7_) acpiprt7 at acpi0: bus 2 (SPB0) acpiprt8 at acpi0: bus -1 (SPB1) acpiprt9 at acpi0: bus 6 (SPB2) acpiprt10 at acpi0: bus 7 (SPB3) acpiprt11 at acpi0: bus 1 (P2P_) acpiec0 at acpi0 acpicpu0 at acpi0: C2, PSS acpicpu1 at acpi0: C2, PSS acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT1 model "13848633228217409" serial b5d6 type Lion oem "Sanyo " acpiac0 at acpi0: AC unit online acpibtn2 at acpi0: LID_ acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ acpivideo2 at acpi0: VGA_ cpu0: 998 MHz: speeds: 1000 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00 drm0 at radeondrm0 radeondrm0: msi azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi azalia0: no supported codecs ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374 sd0: 305245MB, 512 bytes/sector, 625142448 sectors ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling iic0 at piixpm0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16 azalia1: codecs: Conexant/0x506c audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci1 at ppb0 bus 1 ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00 pci3 at ppb2 bus 6 alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5 ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00 pci4 at ppb3 bus 7 "Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Elantech Touchpad, version 2, firmware 0x40213 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2 urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67 uvideo0 at uhub1 port 1 configuration 1 interface 0 "Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2 video0 at uvideo0 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 16 buttons, Z dir wsmouse1 at ums0 mux 0 uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2 uhidev1: iclass 3/0, 17 report ids uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (4752f806cf2cc091.a) swap on sd0b dump on sd0b drm: initializing kernel modesetting (PALM 0x1002:0x9804 0x1025:0x0598). radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF drm: PCIE GART of 512M enabled (table at 0x0000000000040000). drm: Internal thermal controller without fan control radeondrm0: 1366x768 wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) |
|
|||
I also have an AAO722 with AMD C50, I swapped the Broadcom for an Intel internal mini PCI wifi card, & have had no bother with wifi since.
I've had FreeBSD, GhostBSD & PC-BSD running on mine, at different times, (as well as AnitiX Linux), great little netbook.
__________________
Linux since 1999, & also a BSD user. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Your FreeBSD Laptop | vermaden | FreeBSD General | 67 | 6th June 2014 12:27 PM |
OpenBSD = Awesome Laptop OS | revzalot | OpenBSD General | 8 | 9th September 2008 07:12 AM |
Laptop Repair | DrJ | General Hardware | 4 | 25th August 2008 02:30 PM |
laptop | cw_ | FreeBSD General | 21 | 14th August 2008 02:48 AM |
Dual-boot laptop won't boot OpenBSD after upgrade to 4.3 | kbeaucha | OpenBSD Installation and Upgrading | 17 | 30th May 2008 02:40 PM |