DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 11th March 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Default strange dmesg output

This is my dmesg output now, what's going on?

Code:
$ dmesg
ctlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
usb_transfer_complete: actlen > len 106 > 64
syncing disks... done
rebooting
[ using 395092 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A]console in [keyboard] USB found
using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.3 (GENERIC) #1670: Wed Mar 12 11:12:33 MDT 2008
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1033367552 (985MB)
mainbus0 at root: model PowerMac10,1
cpu0 at mainbus0: 7447A (Revision 0x102): 1249 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: uni-n
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9 irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x0, 0% charged
piic0 at adb0
iic1 at piic0
maxtmp0 at iic1 addr 0xc8: max6642
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <ST940110A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
atapiscsi0 at wdc1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACD> SCSI0 5/cdrom removable
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:5e:38:10
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
uhub6 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/5.07 addr 2
ulpt0 at uhub6 port 1 configuration 1 interface 0 "Canon S200SP" rev 1.10/1.03 addr 3
ulpt0: using bi-directional mode
uhub7 at uhub6 port 3 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev 1.10/4.10 addr 4
uhidev0 at uhub7 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
softraid0 at root
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a swap on wd0b dump on wd0b

I've tried rebooting, but it's still the same
Reply With Quote
  #2   (View Single Post)  
Old 11th March 2009
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Banned
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Default

Have you connected a USB device recently? that is a DIAGNOSTIC message being printed for debugging reasons, it isn't exactly an error though.

Quote:
Originally Posted by options(4)
option DIAGNOSTIC
Adds code to the kernel that does internal consistency checks. This code will cause the kernel to panic if corruption of internal data structures is detected.
It sounds like a device you're using is operating slightly out of specifications, I suspect that none of us here know exactly what the problem is, you should really ask this question on the mailing lists.. if you're not noticing any adverse side effects, you might be able to ignore the dmesg spam.

Note; when or if you send a message to the mailing lists.. include more information than what you provided here.
Reply With Quote
  #3   (View Single Post)  
Old 11th March 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Default

I did not connect any special new device recently, haven't touched anything really. Or it could be my Canon printer, which some weeks ago was not responding, but then came back to normal life.
Anyway, I didn't notice any bad behaviour, so at least until I do I guess I can forget about it.
thanks
Reply With Quote
  #4   (View Single Post)  
Old 11th March 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 7,977
Default

The dmesg area in RAM is a fixed size. It will wrap, if the area fills up.

At power-on and first boot, it will contain the kernel configuration and device scanning output. After that, it will contain any kernel messages sent to the console. If those messages fill the dmesg area, kernel configuration information will be overlayed. It can still be obtained from /var/run/dmesg.boot.

Kernel messages are also logged in /var/log/messages.

You may notice, if RAM is not wiped by your BIOS during subsequent boots, a series of kernel configuration and scan messages in your dmesg output, rather than a single one. On boot, the OS will check the dmesg area looking for existing messages from previous boots, and if it finds a valid set of messages, will pick up where it left off. Just in case you need the prior information for debugging purposes.
Reply With Quote
  #5   (View Single Post)  
Old 11th March 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Default

oh, I see,
so I guess all is fine

Last edited by gosha; 11th March 2009 at 01:15 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to: DMESG Monitoring damien-NF FreeBSD Installation and Upgrading 2 4th August 2009 11:30 PM
Digital sound output Zodox FreeBSD General 5 12th November 2008 02:21 PM
Properly sending dmesg to dmesg@ twisted_steel OpenBSD General 5 27th July 2008 02:43 PM
ACPI - dmesg lumiwa FreeBSD General 3 10th July 2008 03:55 AM
strange security run output deadeyes FreeBSD Security 5 2nd July 2008 04:51 PM


All times are GMT. The time now is 04:58 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick